硅微机械谐振陀螺仪的非线性分析

给出了硅微机械谐振陀螺仪的结构,介绍了硅微机械谐振陀螺仪的工作原理,详细推导并给出了陀螺仪的输出频率和标度因数非线性的计算公式;基于影响谐振陀螺仪标度因数的参数,分析了由谐振器的振幅和梳齿静电驱动力引起的硅微机械谐振陀螺仪的非线性特性,给出了振动幅度与谐振频率关系的表达式.实验结果表明,陀螺仪的整体性能主要取决于谐振器振动幅度的稳定性.     

Vortex structure generation on the frontal surface of a cylinder set transversely in a hypersonic flow

The problem of formation of spatially periodic structures on the frontal surface of a cylindrically blunted body set transversely in a hypersonic flow is studied. Within the framework of the model adopted, a possible mechanism of vortex structure generation on the frontal surface of the blunt body is proposed and confirmed by calculations; in this mechanism, the curved bow shock produces a vortex flow, while in its turn the vortex, which persists under weak dissipation, acts on the shock thus maintaining its curved shape. It is shown that the spatially periodic mode of hypersonic flow past a cylinder can exist in the case of a uniform incident flow and under homogeneous boundary conditions on the body surface.     

入射涡与圆柱相互作用的数值模拟

本文用快速涡方法对入射涡与圆柱的相互作用进行了数值模拟,观察到了入射涡在圆柱表面上诱导的二次分离和三次分离现象。二次涡的产生,与入射涡配对,改变了它们的运动轨迹。二次涡是入射涡“回跳”现象的主要原因。本文还对不同入射涡强度及相互位置作了计算,并分析了不同参数对涡运动轨迹的影响。这些现象与涡的无粘圆柱绕流有着本质的差异。     

Modeling the effect of diffusion of the ambient medium on the long-term strength of a hollow cylinder under uniaxial tension

The problem of the long-term strength of an extended thick-walled tube containing a corrosive medium in the internal cavity is solved. The diffusion of this medium into the tube material is analyzed. The diffusion equation is solved approximately by introducing the diffusion front, and the error of the solution is estimated. The dependence of the time of fracture of the tube on the variable tensile stress and the concentration of the medium filling the cavity is obtained. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 4, pp. 88–93, July–August, 2007.     

An analytical solution for the velocity and shear rate distribution of non-ideal Bingham fluids in concentric cylinder viscometers

An analytical solution is presented for the calculation of the flow field in a concentric cylinder viscometer of non-ideal Bingham-fluids, described by the Worrall-Tuliani rheological model. The obtained shear rate distribution is a function of the a priori unknown rheological parameters. It is shown that by applying an iterative procedure experimental data can be processed in order to obtain the proper shear rate correction and the four rheological parameters of the Worrall-Tuliani model as well as the yield surface radius. A comparison with Krieger's correction method is made. Rheometrical data for dense cohesive sediment suspensions have been reviewed in the light of this new method. For these suspensions velocity profiles over the gap are computed and the shear layer thicknesses were found to be comparable to visual observations. It can be concluded that at low rotation speeds the actually sheared layer is too narrow to fullfill the gap width requirement for granular suspensions and slip appears to be unavoidable, even when the material is sheared within itself. The only way to obtain meaningfull measurements in a concentric cylinder viscometer at low shear rates seems to be by increasing the radii of the viscometer. Some dimensioning criteria are presented.Notation A, B Integration constants - C Dimensionless rotation speed = µ/_y - c = 2µ - d = ₀ ²–2c_y - f() = (–₀)²+2c(–_y) - r Radius - r _b Bob radius - r _c Cup radius - r _y Yield radius - r ₀ Stationary surface radius - r Rotating Stationary radius - Y ₀ Shear rate parameter = /µ Greek letters Shear rate - = (r _y /r _b )²– 1 - µ Bingham viscosity - µ₀ Initial differential viscosity - µ µ₀-µ - Rotation speed - Angular velocity - Shear stress - _b Bob shear stress - _B Bingham stress - _y (True) yield stress - ₀ Stress parameter = _B +µ Y ₀ - _B - _y      

Further study on vortex shedding flow by a circular cylinder

In the present paper the mechanism involved in vortex shedding flows is investigated in detail. In the early stage of the unsteady separated flow the interaction between secondary vortices and primary vortices is quite strong. In the later stage of the flow, corresponding to the vortex shedding the recirculating flow region on each side of the aft body goes through such a cycle: growth-contraction-growth, the secondary separation occurs periodically rather than continuously. The reduction of circulation is taken into account in three cases with different decay factors to study its influence on the prediction of main flow characteristics. Results show that to simulate vortex shedding flow it is necessary to include the reduction of circulation to bring the calculated results into good agreement with experiments. An improved discrete vortex model is suggested in which both the secondary separation and the reduction are incorporated. The processes of vortex shedding, the forces prediction and other flow characteristics are given and some discussions are made. Porject is supported by National Natural Science Foundation of China.     

Elastodynamic solution of a non-homogeneous orthotropic hollow cylinder

A theoretical method for analyzing the axisymmetric plane strain elastodynamic problem of a non-homogeneous orthotropic hollow cylinder is developed. Firstly, a new dependent variable is introduced to rewrite the governing equation, the boundary conditions and the initial conditions. Secondly, a special function is introduced to transform the inhomogeneous boundary conditions to homogeneous ones. By virtue of the orthogonal expansion technique, the equation with respect to the time variable is derived, of which the solution can be obtained. The displacement solution is finally obtained, which can be degenerated in a rather straightforward way into the solution for a homogeneous orthotropic hollow cylinder and isotropic solid cylinder as well as that for a non-homogeneous isotropic hollow cylinder. Using the present method, integral transform can be avoided and it can be used for hollow cylinders with arbitrary thickness and subjected to arbitrary dynamic loads. Numerical results are presented for a non-homogeneous orthotropic hollow cylinder subjected to dynamic internal pressure. The project supported by the National Natural Science Foundation of China (10172075 and 10002016)     

Stress Singularity in an Elastic Cylinder of Cylindrically Anisotropic Materials

The issue of stress singularity in an elastic cylinder of cylindrically anisotropic materials is examined in the context of generalized plane strain and generalized torsion. With a viewpoint that the singularity may be attributed to a conflicting definition of anisotropy at r=0, we study the problem through a compound cylinder in which the outer cylinder is cylindrically anisotropic and the core is transversely isotropic. By letting the radius of the core go to zero, the cylinder becomes one with the central axis showing no conflict in the radial and tangential directions. Closed-form solutions are derived for the cylinder under pressure, extension, torsion, rotation and a uniform temperature change. It is found that the stress is bounded everywhere, and singularity does not occur if the anisotropy at r=0 is defined appropriately. This revised version was published online in July 2006 with corrections to the Cover Date.     

气缸垫对机体受力和缸套变形影响的实验研究

某四缸柴油机在试制中出现机体裂纹现象，为保证内燃机正常工作，机体裂纹问题急待处理．应用力学理论对此进行分析，得出机体裂纹是由机体受力不均匀引起的结论．同时采用实验应力分析方法，对两种四缸柴油机机体进行了对比实验研究，在实验中发现了缸垫对机体受力和缸套变形的影响，从而提出了一种有效的改进方法，使机体的应力有明显下降，并不再出现裂纹，也未出现漏油、漏气和活塞拉缸等不良现象，大大提高了产品可靠性．     

Direct Statistical Simulation of a Supersonic Flow of a Binary Mixture of Rarefied Gases around a Transversely Positioned Cylinder

A supersonic flow of a binary mixture of gases in a wide range of rarefaction (from a flow with a Knudsen number K _n = 0.1 to a free-molecular flow) around a cylinder is studied by means of direct statistical Monte Carlo simulations (DSMC method). The influence of a small fraction of heavy particles in a light gas flow on the region of significant nonequilibrium near the cylinder and on the heat flux is considered.__________Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 5, pp. 53–59, September–October, 2005.