Amperometric Determination of Cr(III) and Cr(VI) by Flow Injection Analysis

Speciation of Cr(III) and Cr(VI) can be attained by flow injection analysis with amperometric detection. Cr(VI) is reduced in an acidic medium to Cr(III) with a glassy carbon electrode at —0.1 V vs. Ag/AgCl and the current is recorded. Cr(III) is oxidised on-line to Cr(VI) with alkaline hydrogen peroxide solution. From the difference of the total chromium and Cr(VI), the amount of Cr(III) was obtained. A linear calibration curve for Cr(VI) was obtained for the concentration ranges 0.01-5.0ppm of Cr(VI) and we have calculated the limit of determination to be about 0.5ppb. We have studied the degree of reproducibility obtained using the solid electrodes under various conditions. The influence of flow rate, coil length, interfenences and the extent of reaction were studied.     

Prediction of polyurethane behaviour via time-temperature superposition: Meanings and limitations

Two main issues are essential nowadays for practitioners in the field of polymeric materials: how a polymer will behave under dynamic loading conditions and for how long a polymer is reliable. In this sense, the time-temperature superposition principle was applied to the main viscoelastic properties (E′, E″ and tan δ) of a series of polyurethane coatings (PU-DEG-TMP) tested for mechatronic devices. Polyurethanes are derived from an ester glycol (poly(ethylene adipate) glycol), an aromatic diisocyanate (4,4′-dibenzyldiisocyanate) and di/trifunctional chain extenders - diethylene glycol (DEG) and trimethylol propane (TMP). Despite polyurethane intrinsic rheologic complexity, the moduli/loss factor curves superimpose well over several decades of reduced frequency at the glass transition temperature (T_g), 0 °C and 15 °C, the last temperature being considered the midpoint of the practical testing range. Three criteria were for checking the applicability of the time-temperature superposition: the Cole-Cole plot, the similarity between the a_T calculated from both moduli (E′, E″) and the visual appearance of the final master curve. The presence of both hydrogen bonding and chemical joint points, along with some dangling chains put in a broader context the discussion of the microstructural features resulted from the application of the William-Landell-Ferry (WLF) equation.     

Reconciling Electrostatic and n→π* Orbital Contributions in Carbonyl Interactions

Interactions between carbonyl groups are prevalent in protein structures. Earlier investigations identified dominant electrostatic dipolar interactions, while others implicated lone pair n→π* orbital delocalisation. Here these observations are reconciled. A combined experimental and computational approach confirmed the dominance of electrostatic interactions in a new series of synthetic molecular balances, while also highlighting the distance-dependent observation of inductive polarisation manifested by n→π* orbital delocalisation. Computational fiSAPT energy decomposition and natural bonding orbital analyses correlated with experimental data to reveal the contexts in which short-range inductive polarisation augment electrostatic dipolar interactions. Thus, we provide a framework for reconciling the context dependency of the dominance of electrostatic interactions and the occurrence of n→π* orbital delocalisation in C=O⋅⋅⋅C=O interactions.     

钼铁中钼的快速分析方法

在参照GB5059.1-85的基础上,以稀硝酸溶解试样,EDTA为掩蔽剂,在乙酸铵-乙酸（pH4.5）的缓冲溶液中,8-羟基喹啉与钼生成黄色沉淀,干燥称量无水羟基喹啉盐[MoO2(C9H6NO)2]。分别对沉淀时pH值、陈化时间、沉淀剂的用量进行选择。研究出了一种快速、准确、经济的分析方 法。分析精密度高、准确度好,完全能够满足生产分析要求。     

XPS analysis of bio‐organic systems

A survey of the literature is made for the XPS analysis of food products (mainly spray‐dried powders, which reveal a considerable surface enrichment in lipids) and of microorganisms and related systems (extracellular polymer substances and biofilms). This survey is used as a background for discussions and recommendations regarding methodology. Sample preparation methods reviewed are freeze drying, analysis of frozen hydrated specimens and adsorption of surface‐active biocompounds on model substrates. Peak decomposition is a way to increase the wealth of information provided by the XPS spectra. It should be performed after a check that sample charge stabilization is satisfactory. Moreover, ensuring the precision needed to make comparisons within sets of samples may involve a trade‐off between imposing constraints and generating information. The examination of correlations between spectral data in the light of chemical guidelines is useful to validate or improve peak decomposition and component assignment, and may also upgrade the chemical information regarding speciation. Further upgrading may be achieved by expressing marker XPS data in terms of concentrations of compounds of interest. Different methods of computation are discussed, providing a composition in terms of ingredients, classes of biochemical compounds, or various organic and inorganic compounds. As an alternative or complement to this deterministic approach, multivariate analysis of suitable spectral windows provides spectral components, which may be used for comparing samples, and which may have a direct chemical relevance or be used to identify features of interest. Copyright © 2011 John Wiley & Sons, Ltd.     

Evaluation of automated sample preparation, retention time locked gas chromatography-mass spectrometry and data analysis methods for the metabolomic study of Arabidopsis species

In this paper, automated sample preparation, retention time locked gas chromatography-mass spectrometry (GC-MS) and data analysis methods for the metabolomics study were evaluated. A miniaturized and automated derivatisation method using sequential oximation and silylation was applied to a polar extract of 4 types (2 types×2 ages) of Arabidopsis thaliana, a popular model organism often used in plant sciences and genetics. Automation of the derivatisation process offers excellent repeatability, and the time between sample preparation and analysis was short and constant, reducing artifact formation. Retention time locked (RTL) gas chromatography-mass spectrometry was used, resulting in reproducible retention times and GC-MS profiles. Two approaches were used for data analysis. XCMS followed by principal component analysis (approach 1) and AMDIS deconvolution combined with a commercially available program (Mass Profiler Professional) followed by principal component analysis (approach 2) were compared. Several features that were up- or down-regulated in the different types were detected.     

Chemiluminescence determination of antibacterial drug trimethoprim by automated sequential injection technique with permanganate and hexametaphosphate as reagents

Antibacterial drug trimethoprim [2,4-diamino-5-(3,4,5-trimethoxybenzyl)-pyrimidine] (I) was determined in pharmaceutical formulations by using a lab-made PC-controlled SIA analyser linked to conventional HPLC fluorimetric detector equipped with a chemiluminescence module. The chemical principle is the oxidation of I by KMnO(4) in acid medium; the reaction is accompanied by the emission of chemiluminescence, which is enhanced in the presence of hexametaphosphate (HMP). The optimum sequence and the flow parameters and concentrations and volumes of reagents aspirated optimised by a computer-aided simplex method were, 100 mul of 5 mM HMP, 40 mul of a test solution of I, 2 mul of 0.5 M H(2)SO(4) and 20 mul of 1 mM KMnO(4); the luminescing zone was pushed into the detector at a flow rate of 49 mul s(-1). The calibration graph relating the intensity of luminescence to concentration of I was parabolic (r=0.9994) in the range 0.5-100 mug ml(-1) of I with rectilinear part (r=0.9999) in the range 20-100 mug ml(-1) of I; the limit of detection was 0.1 mug ml(-1) of I. The method was used for the assay of Triprim(R) tablets (with nominal content 100 or 200 mg of I) for the active substance as well as for content uniformity tests; the R.S.D. values did not exceed 1% (n=5). The SIA results did not show statistical difference from those obtained by pharmacopoeial acidimetric titration in non-aqueous medium; the excipients such as microcrystalline cellulose, maze starch, povidone, talc, magnesium stearate and gelatin did not interfere.     

Thermal And Structural Characterization of Commercial α-, β-, and γ-Cyclodextrins

α-, β-, and γ-cyclodextrins (CDs) marketed by five different companies were characterized from the thermal and structural point of view. Three αCD samples showed two-step DSC dehydration profiles and their XRD patterns were characteristic for αCD⋅6H₂O form I, whereas one brand with an apparent three-step DSC dehydration behaviour was a mixture of αCD⋅6H₂O form I and anhydrous αCD. The differences in the DSC profiles after dehydration and EGA onset decomposition temperatures recorded for the five βCD brands were attributed to different manufacturing and purification processes. The five γCDs brands showed a common thermal behaviour and very similar XRD patterns. The patterns did not match the idealized pattern of γCD⋅14.1H₂O, indicating the occurrence of two different hydrated crystal structures. This revised version was published online in August 2006 with corrections to the Cover Date.     

Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001