荧光材料GdOCl∶Er~(3+),Yb~(3+)的深红-近红外发光研究

采用高温固相合成法制备了Er3+,Yb3+双掺杂的GdOCl荧光材料,并研究其荧光性能。该双掺杂体系荧光粉吸收紫外光,发出红色(619 nm)和近红外(~979 nm)荧光。在这些荧光材料中,1个Er3+离子可以有效将其能量转移给2个Yb3+离子。通过改变Yb3+掺杂浓度,对比Gd0.998 5-yOCl∶0.0015Er3+,yYb3+中的Er3+的发射光谱和不同检测波长的荧光寿命变化特点,对Er3+-Yb3+发生量子剪裁的能级进行分析和指认,并计算了能量转化效率(η)和量子效率(Q)。正是由于具备这种荧光性能,该荧光材料体系有望在荧光太阳能收集器以及军事和医学的红外显示和探测技术中获得应用。     

Light-Driven Crawling of Molecular Crystals by Phase-Dependent Transient Elastic Lattice Deformation

The light-driven crawling of a molecular crystal that can form three phases, (α, β, and γ) is presented. Laser irradiation of the molecular crystal can generate phase-dependent transient elastic lattice deformation. The resulting elastic lattice deformation that follows scanning irradiation of a laser can actuate the different phases of molecular crystal to move with different velocity and direction. Because the γ phase has a large Young's modulus (ca. 26 GPa), a force of 0.1 μN can be generated under one laser spot. The generated force is sufficient to actuate the γ-formed molecular crystals in a wide dimensional range to move longitudinally at a velocity of about 60 μm min⁻¹, which is two orders of magnitude faster than the α and β phases.     

Dynamic fracture testing of polymethyl-methacrylate (PMMA) single-edge notched beam

Dynamic fracture in single-edge notched polymethyl-methacrylate (PMMA) beams have been investigated by three-point-bending impact testing with a drop-weight machine. A high-speed camera combined with the digital image correlation (DIC) method is used to capture the impact-induced crack initiation and propagation, as well as the beam deformation fields and the open mode strain at the original notch tip. The crack propagation length is recorded and the instantaneous crack velocity is calculated. Furthermore, the dynamic fracture toughness K_Id is quantified from the loading-displacement relations at different impact velocities. The effects of the impact velocity and impact energy on dynamic fracture toughness, fracture initiation strain, as well as the corresponding influences on the fracture propagation velocity, are discussed.     

Effect of Gaussian size distribution width on minimum fluidization velocity in tapered gas–solid fluidized beds

This paper investigated the effect of Gaussian distribution width, average particle diameter, particle loading, and the tapered angle on minimum fluidization velocity (U_mf) by conducting extensive experiments in tapered fluidized beds. Three powders with Gaussian size distribution and different distribution widths were used in the experiments. An increase in U_mf with increasing the average particle diameter, particle loading, and the tapered angle was observed. There was also a nonmonotonic behavior of U_mf as the Gaussian distribution width increased. An empirical correlation including dimensionless groups for predicting U_mf in tapered beds was developed in which the effect of distribution width was considered. The proposed correlation predictions were in good agreement with the experimental data, with a maximum deviation of 16.5% and average and standard deviations of, respectively, 6.4% and 7.4%. The proposed correlation was also compared with three earlier models, and their accuracy was discussed.     

异地时钟同步与时间的度量

介绍了庞加莱等人关于"异地时钟同步"和"相继时间段(绵延)相等"的思考,介绍了爱因斯坦"约定"异地时钟"同时"的方案,以及朗道等人对该方案的发展.我们赞同庞加莱的设想,即对光速传播性质的约定是时间测量的基础,并指出对光速的约定相当于对时空对称性的约定.我们在"约定光速的基础上"给出了钟速同步具有传递性的条件,不仅解决了"异地坐标钟钟速同步"的定义问题,而且解决了"相继时间段相等"的定义问题,证实了庞加莱原初的猜想,简化了时间测量的理论基础.     

升温速度对电场烧结NdFeB材料致密化的影响

首次将电场烧结方法引入烧结NdFeB永磁材料的制备中,通过分析压坯的温度场特征发现,在较高的预设升温速度下,压坯的实际升温过程存在延迟情况。对烧结磁体的SEM观察表明,随预设升温速度的提高,磁体的致密度逐步提高。当NdFeB合金以2000℃/s的预设升温速度在1000℃烧结8min后,磁体的微观组织明显优于传统烧结磁体。     

均匀液滴喷射成球法的射流速度计算

分别通过流体力学计算、数值模拟及实验方法研究在不同压力作用下生产电子封装用锡球时不同喷嘴的射流速度。对比分析表明,理论计算和模拟与实验结果基本相符;理论计算方法较方便、准确计算出射流出口的平均速度,数值模拟方法不但可求得平均速度,而且可得到射流断面的速度分布。保持喷嘴直径不变,射流速度随压力增加而呈抛物线形增加。在相同压力作用下,射流速度随喷嘴直径增加而稍有增加,随过渡段直径增加而减小,并且压力差越大增加值或减小值也越大。     

水平管段塞流持液率波动规律研究

以空气和水为工质,采用双平行电导探针,在水平多相流环道(d=50.00mm)中研究了段塞流持液率与压力波动的关系以及折算气速、折算液速变化对持液率的影响,并将持液率的试验值与预测模型进行了比较.结果表明:持液率波动能更真实地反映段塞流动特性,可以用来确定液塞频率;增加折算气速时,液塞持液率减小;增加折算液速时,持液率增大.     

探针移动速度对等离子体射流热流密度测量结果的影响

采用自行研制的中心嵌有铜柱感应件的小尺寸杆状热流探针,在低扰动条件下,对射入大气环境的纯氩层流等热离子体射流传向铜探头表面的热流密度进行了动态测量.结果表明,在射流最高温度16500 K、最大轴向速度850 m/s、探针垂直于射流流动方向的移动速度130～260 mm/s的实验参数范围内,随着探针移动速度的提高,测得的热流密度值减小;射流温度和速度越高,探针移动速度对热流密度测量值的影响越大.