LPV identification of a turbocharged diesel engine

This work proposes a methodology of identifying linear parameter varying (LPV) models for nonlinear systems. First, linear local models in some operating points, by applying standard identifications procedures for linear systems in time domain, are obtained. Next, a LPV model with linear fractional dependence (LFR) with respect to measured variables is fitted with the condition of containing all the linear models identified in previous step (differential inclusion). The fit is carried out using nonlinear least squares algorithms. Finally, this identification methodology will then be applied to a nonlinear turbocharged diesel engine.     

三维Minkowski空间中非类光曲线的双曲达布像和从切高斯曲面

本文主要给出了三维Minkowski空间中非类光曲线的双曲达布像和从切高斯曲面的奇点分类,并且建立了奇点和曲线几何不变量之间的联系,其中曲线几何不变量与曲线同螺线切触的阶数密切相关.     

Methanol vapor‐induced morphology and current–voltage characteristic changes in a cast‐coated nafion film/interdigitated microarray electrode

Methanol vapor‐induced membranous changes in a cast‐coated Nafion thin film were studied through current–voltage (I–V) characteristics with an interdigitated microarray (IDA) electrode and atomic force microscopy (AFM). The obtained I–V curves showed that the as‐prepared Nafion film was stable under humidified nitrogen gas; however, the I–V profile dramatically changed with exposure to methanol vapor. Next, the morphology of the film was compared before and after methanol exposure with AFM images. On the basis of our observations, we found that the as‐prepared film had an irregularly complicated microstructure, whereas the structure became homogeneous in appearance after 30 min of exposure to methanol gas. The alternating‐current conductivity data, showing almost the same magnitude before and after exposure, strongly suggested that the I–V profile shift was based on a change in an electrode reaction mechanism induced by a change in the junction at the Nafion/IDA electrode interface. Furthermore, the methanol vapor‐pre‐exposed Nafion was stable for further exposure to methanol vapor, water vapor, or both. With the stabilized film used in combination with the IDA electrode, a reversible change in the magnitude of the current was observed when the methanol/water vapor ratio was varied. This indicated that the electrode reaction had good reproducibility after the treatment. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1103–1109, 2002     

Dispersive liquid–liquid microextraction of quinolones in porcine blood: Validation of a CE method using univariate calibration or multivariate curve resolution‐alternating least squares for overlapped peaks

In the previously published part of this study, we detailed a novel strategy based on dispersive liquid–liquid microextraction to extract and preconcentrate nine fluoroquinolones in porcine blood. Moreover, we presented the optimized experimental conditions to obtain complete CE separation between target analytes. Consequently, this second part reports the validation of the developed method to determine flumenique, difloxacin, enrofloxacin, marbofloxacin, ofloxacin, ciprofloxacin, through univariate calibration, and enoxacin, danofloxacin, and gatifloxacin through multivariate curve resolution analysis. The validation was performed according to FDA guidelines for bioanalytical assay procedures and the European Directive 2002/657 to demonstrate that the results are reliable. The method was applied for the determination of fluoroquinolones in real samples. Results indicated a high selectivity and excellent precision characteristics, with RSD less than 11.9% in the concentrations, in intra‐ and interassay precision studies. Linearity was proved for a range from 4.00 to 30.00 mg/L and the recovery has been investigated at four different fortification levels, from 89 to 113%. Several approaches found in the literature were used to determinate the LODs and LOQs. Though all strategies used were appropriate, we obtained different values when using different methods. Estimating the S/N ratio with the mean noise level in the migration time of each fluoroquinolones turned out as the best studied method for evaluating the LODs and LOQs, and the values were in a range of 1.55 to 4.55 mg/L and 5.17 to 9.62 mg/L, respectively.     

Creep life evaluation of aluminum conductor composite core utilized in high voltage electric transmission

The creep life of aluminum conductor composite core (ACCC) utilized in high voltage electric transmission was investigated using an experimental method based on the equivalence relationship. First, the time-temperature-stress equivalence relationship was developed using the time-temperature and the time-stress equivalence relationships. Then, tensile creep experiments were conducted under different temperatures and different stress levels to obtain the strain-time curves of the ACCC. Finally, the creep strain master curve was obtained using the experimental data based on the time-temperature-stress equivalence relationship, allowing prediction of ACCC creep life. The results will play an important role in evaluation of the long-term characteristics of the ACCC for engineering applications.     

Theoretical prediction on HBeN− and HNBe− anions using multiconfiguration second‐order perturbation theory

The HBeN^? and HNBe^? anions have been investigated for the first time using the CASSCF, CASPT2, and DFT/B3LYP methods with the contracted atomic natural orbital (ANO) and cc‐pVTZ basis sets. The geometries of all stationary points along the potential energy surfaces were optimized at the CASSCF/ANO and B3LYP/cc‐pVTZ levels. The ground and the first excited states of HBeN^? are predicted to be X²Π and A²Σ⁺ states, respectively. It was predicted that the ground state of HNBe^? is X²Σ⁺ state. The A²Π state of HNBe^? has unique imaginary frequency. A bend local minimum M1 was found along the 1²A″ potential energy surface and the A²Π state of HNBe^? should be the transition state of the isomerization reactions for M1 ? M1. The CASPT2/ANO potential energy curves of isomerization reactions were calculated as a function of HBeN bond angle. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Complexation of Hg2+ with α‐Lipoic and Dihydrolipoic Acids: Study by Differential Pulse Voltammetry on Rotating Au‐Disk Electrode and ESI‐MS

The complexation of the natural antioxidants α‐lipoic acid (ALA) and its reduced form dihydrolipoic acid (DHLA) with Hg²⁺ was investigated by a recently proposed differential pulse voltammetric (DPV) method using the rotating Au‐disk electrode. Complexation processes are proposed from the multivariate curve resolution by alternating least squares (MCR‐ALS) analysis of DPV titration data. Main complexes were both 1 : 1 Hg : ALA and Hg : DHLA, although the formation of 1 : 2 complexes can be also deduced. ALA and DHLA show different Hg²⁺‐binding patterns at different pH. Voltammetric findings are completed with the data obtained by electrospray ionization mass‐spectrometry (ESI‐MS), especially in negative mode.     

一种支持ECC算法的传输层安全协议

首先介绍了RSA算法和ECC算法（Elliptic Curve Cryptography）在国内外的应用情况,接着介绍了RSA算法在传输层安全协议中的应用情况,并以身份认证系统为例,原有身份认证系统采用TLS（Transport Layer Security）协议,通过对协议的修改,完成协议对椭圆曲线的支持,提出了改进的支持ECC算法的传输层安全协议,协议内容参照传输层安全协议（RFC4346TLS1．1）,结合实际应用需求,在TLS1．1的握手协议中增加了ECC的认证模式和密钥交换模式,取消了DH密钥协商方式,修改了密码套件的定义。     

The composition-explicit distillation curve technique: Relating chemical analysis and physical properties of complex fluids

The analysis of complex fluids such as crude oils, fuels, vegetable oils and mixed waste streams poses significant challenges arising primarily from the multiplicity of components, the different properties of the components (polarity, polarizability, etc.) and matrix properties. We have recently introduced an analytical strategy that simplifies many of these analyses, and provides the added potential of linking compositional information with physical property information. This aspect can be used to facilitate equation of state development for the complex fluids. In addition to chemical characterization, the approach provides the ability to calculate thermodynamic properties for such complex heterogeneous streams. The technique is based on the advanced distillation curve (ADC) metrology, which separates a complex fluid by distillation into fractions that are sampled, and for which thermodynamically consistent temperatures are measured at atmospheric pressure. The collected sample fractions can be analyzed by any method that is appropriate. The analytical methods we have applied include gas chromatography (with flame ionization, mass spectrometric and sulfur chemiluminescence detection), thin layer chromatography, FTIR, corrosivity analysis, neutron activation analysis and cold neutron prompt gamma activation analysis. By far, the most widely used analytical technique we have used with the ADC is gas chromatography. This has enabled us to study finished fuels (gasoline, diesel fuels, aviation fuels, rocket propellants), crude oils (including a crude oil made from swine manure) and waste oils streams (used automotive and transformer oils). In this special issue of the Journal of Chromatography, specifically dedicated to extraction technologies, we describe the essential features of the advanced distillation curve metrology as an analytical strategy for complex fluids.     

基于SPMC75F2413A单片机的步进电机加减速控制

提出一种基于凌阳单片机的步进电机加减速的控制方法。采用凌阳科技推出的16位结构工控单片机SPMC75F2413A为控制器,由Allegro公司生产的两相步进电机专用驱动器件SLA7042M构成步进电机的驱动电路,在传统的3段直线加减速控制算法基础上增加至7段S形曲线加减速过程,控制步进电机的启动和停止。实验结果表明。该控制方法克服了直线加减速中不连续、易造成系统冲击的问题,整个系统实现柔性控制,电机启动、停止连续性能提高30％。