Dependence of critical current density on microstructure and processing of high-Tc superconductors

Microstructural origins for reduced weak-link behavior in high-J_c melt-processed YBCO, spray pyrolyzed thick films of Tl-1223, metallic precursor Y-124 polycrystalline powder-in-tube (PIT) wires and PIT Bi-2212/2223 are discussed. Since the materials studied are the highest J_c, polycrystalline, high-T_c superconductors fabricated worldwide, the results provide important guidelines for further improvements in superconducting properties, thereby enabling practical applications of these materials. It is found that strongly linked current flow within domains of melt-processed 123 occurs effectively through a single crystal path. In c-axis oriented, polycrystalline Tl-1223 thick films, local in-plane texture has been found to play a crucial role in the reduced weak-link behavior. Formation of “colonies” of grains with a common c-axis and modest in-plane misorientation was observed. Furthermore, a colony boundary in general has a varying misorientation along the boundary. Large regions comprised primarily of low angle boundaries were observed. Percolative transport through a network of such small angle boundaries appears to provide the nonweak-linked current path. Although powder-in-tube BSCCO 2212 and 2223 also appear to have a “colony” microstructure, there are some important differences. Colonies in BSCCO consist of stacks of grains with similar c-axis orientation in contrast to colonies in Tl-1223 films where few grains are stacked on top of one another. Furthermore, most grains within a colony in BSCCO have the same lateral dimensions as that of the colony, resulting largely largely in “twist” boundaries. Further microstructural characterization of high-J_c PIT 2212 and 2223 is currently underway. In the case of Y-124 wires, weak macroscopic in-plane texture is found. Additional measurements are underway to determine if a sharper, local in-plane texture also exists. It is found that in three of the four types of superconductors studied, reduced weak-link behavior can be ascribed to some degree of biaxial alignment between grains, either on a “local” or a “global” scale.     

室温脉冲螺旋Wiggler磁体和大电流脉冲电源的研究

本文研究了适用于自由电子激光的室温脉冲螺旋Ｗｉｇｇｌｅｒ磁体，对其设计构思、磁场特性和设计参数进行了分析和计算．作者在文中还研究并设计了螺旋Ｗｉｇｇｌｅｒ磁体的大电流宽脉冲供电电源；分析了脉冲电流的时间特性对产生自由电子激光的影响程度．     

大电流监测信号提取的光收发及信号处理

近年来,大电流的监测成了人们十分关心的问题,这是由于大电流有强磁、高压、电流大等一系列的直接监测所不能克服的问题。这就需要把高压大电流的强电信号,经过提取后变成能在实验室中直接观测的弱电信号。为此,如何从高压大电流的信号中提取出随实时信号变化而实时变化的小信号就变成了一个关键问题。详细介绍了监测信号提取的光收发电路原理和后续信号处理电路,分析了各部分的作用,给出了必要的分析结果。     

电子电气设备的熔断器、断路器保护

熔断器、断路器是电子电气设备最常用的保护电器,熔断器可以实现过载、短路保护,断路器除具上述功能外,还能实行失压保护.根据线路特点和所保护的设备,采取相应的保护设施,确保用电安全.     

Modification to the Fringe Component of Diffraction Coefficient in TD-EEC Method

A modified formulation for fringe component of diffraction coefficient is implemented to TD-EEC method. An example of diffraction by perfectly conducting plate is used to illustrate our scheme. Comparing with the FDTD results we observe that the improved expression for fringe component is more accurate than that of Michaeli's formulation. This high frequency time domain technique is available for treating the bistatic scattering problems for millimeter waves.     

临床试验(Ⅱ)

在本文的第Ⅰ部份，涉及了临床试验的内涵、研究中的偏性、困难与临床试验设计的进展．第Ⅱ部份主要涉及分析中的一些重要问题，其中包括：５，生存质量的测定；６，病人的依从性； ７， Ｍｅｔａ分析．     

一种可调节电流的电流型PWM直流转换器

介绍一种用于驱动发光二极管(LED)的可调节电流的电流型PWM直流转换器.该直流转换器由于接有一个外接电阻,可以通过调节外接电阻的大小来调节输出电流.输出电流调节范围在5～40mA之间.主要分析了电路的输出电流调节功能,和这种输出电流可变的电流型PWM直流转换器的电流和电压反馈环的反馈实现原理.并简要介绍了这种带电流调节功能的PWM直流转换器的工作原理,最后给出了电路在输出不同电流时使用HSPICE软件对反馈参考电压,PWM锁存器输出波形的仿真结果.     

新型光电混合式电流互感器设计

设计了一种光电混合式电流互感器,它由传感头、光纤传输和光电转换器、信号处理电路和工作电源4部分组成。这种结构具有绝缘性能高、可靠性强、质量小等特点,并对误差情况进行了分析。     

静磁场中的互作用能

讨论了在激发磁场的电流保持不变时和束缚磁荷作为磁场的不变时，两种情况下磁场的相互作用能。结果与静电场类似，两种情况的互作用能中都含有相互磁化，致使物体磁化状态改变作的功。     

Possible triggering of solar activity to big earthquakes (Ms ≥ 8) in faults with near west-east strike in China

A big earthquake (Ms = 8.1) occurred at western Kunlun Mts gap on November 14, 2001. It is the biggest earthquake in China in the past 50 years and the only one with a magnitude bigger than 8 in China after Dangxiong Earthquake (M = 8) in Tibet in 1951. The big earthquake has drawn wide attention of scientists in seismological, geophysical, geological and astro-geodynamic circles. Scientists are interested in the occurrence regularity of the very big earthquakes and try to find out the fac…