Side-chain liquid crystalline polymers: The synthesis and characterization of poly[4-nitrothiophenyl-4-(ω-methacryloyl oxyalkyloxy)] benzoate

A new series of sulfur-containing side-chain liquid crystalline polymer is described. Mesomorphic side chains with methylene spacers of different lengths have been synthesized, and their structures were identified by nuclear magnetic resonance, infrared and mass spectrometry. The liquid crystalline nature of the polymers was characterized by microscopy and differential scanning calorimetry.     

Syntheses and Crystal Structures of Ternary Complexes of Zinc(Ⅱ) and Cadmium(Ⅱ) with 3-Aminobenzoic Acid and 1,10-Phenanthroline

Two new ternary complexes [Zn(3-aba)2(phen)](2.58H2O 1 and {[Cd(3-aba)- (phen)2]·(NO3)·(1.5H2O)}n 2 (3-aba = 3-aminobenzoic acid anion, phen = 1,10-phenanthroline) were synthesized and characterized by elemental analysis, IR, UV spectrum and X-ray diffraction. Complex 1 crystallizes in the rhombohedral system, space group R with a = 3.5733(3), b = 3.5733(3), c = 1.1231(2) nm, V = 12.419(3) nm3, C26H25.17N4O6.58Zn, Mr = 564.37, Z = 18, F(000) = 5253, μ = 0.937 mm-1, Dc = 1.358 g/cm3, R = 0.0668 and wR = 0.1690 for 2424 observed reflections (I > 2σ(I)). Complex 2 belongs to the tetragonal system, space group P4/ncc with a = 2.88451(10), b = 2.88451(10), c = 1.55571(11) nm, V = 12.9441(11) nm3, C31H25CdN6O6.50, Mr = 697.97, Z = 16, F(000) = 5648, μ = 0.727 mm-1, Dc = 1.433 g/cm3, R = 0.0607 and wR = 0.1742 for 3468 observed reflections (I > 2σ(I)). Complex 1 displays a mononuclear structure. The carboxylate group of 3-aminobenzoic acid anion coordinates to Zn(Ⅱ) in a chelating bidentate mode, and the nitrogen atom of the ligand does not involve in coordination. Complex 2 exhibits a one-dimensional chain structure with 3-aminobenzoic acid anion coordinating to Cd(Ⅱ) in a μ2-bridging mode through its nitrogen atom and one of its oxygen atoms.     

基于摩擦磨损的KDP晶体固结磨料抛光垫优化

本文通过固结磨料球与KDP晶体对磨的单因素试验探究固结磨料球中反应物种类、磨粒浓度、反应物浓度、基体硬度对摩擦系数、磨痕截面积和磨痕处粗糙度的影响,试验结果表明:KHCO₃固结磨料球对磨后磨痕对称性好,磨痕处的粗糙度值低;磨痕截面积随磨粒和反应物浓度的增加而增大,随基体硬度的增大而降低;磨痕处粗糙度随磨粒和反应物浓度的增加先降低后上升,随基体硬度的增大先上升后降低;摩擦系数受磨粒和反应物浓度影响不明显,随基体硬度的增大而降低。选择KHCO₃作为反应物,Ⅰ基体,磨粒浓度为基体质量的100%,反应物浓度为15%制备固结磨料球与KDP晶体对磨后的磨痕轮廓对称度好且磨痕处粗糙度值低,以该组分制备固结磨料垫干式抛光KDP晶体,可实现晶体表面粗糙度Sa值为18.50 nm,材料去除率为130 nm/min的高效精密加工。     

添加CaSO4·2H2O为晶种制备磷石膏半水硫酸钙晶须

以固体废弃物磷石膏为原料,在传统常压醇水热法的基础上添加CaSO₄·2H₂O为晶种制备半水硫酸钙晶须。采用单因素试验法探究了晶种含量、丙三醇含量和磷石膏质量分数对晶须结构和形貌的影响,确定晶须的最佳制备工艺条件。采用SEM和XRD对样品进行表征分析,实验结果表明:添加CaSO₄·2H₂O晶种制备晶须的长径比(49.29)比只添加丙三醇的样品的长径比(30.99)提高了近60%;当丙三醇与水的体积比(V)为1、晶种含量为1%、磷石膏质量分数为5%时制备的晶须的平均直径为0.65 μm,长径比达到了62.15,晶须的尺寸均匀。这说明添加1%CaSO₄·2H₂O晶种、V为1的丙三醇和质量分数为5%的磷石膏在常压下能制备出高长径比和尺寸均匀的半水硫酸钙晶须。     

雾化辅助化学气相沉积法氧化镓薄膜生长研究

采用自主设计搭建的雾化辅助化学气相沉积系统设备,开展了Ga₂O₃薄膜制备及其特性研究工作。通过X射线衍射研究了沉积温度、系统沉积压差对Ga₂O₃薄膜结晶质量的影响。结果表明,Ga₂O₃在425~650 ℃温度区间存在物相转换关系。随着沉积温度从425 ℃升高至650 ℃,薄膜结晶分别由非晶态、纯α-Ga₂O₃结晶状态向α-Ga₂O₃、β-Ga₂O₃两相混合结晶状态改变。通过原子力显微镜表征探究了生长温度对Ga₂O₃薄膜表面形貌的影响,从475 ℃升高至650 ℃时,薄膜表面粗糙度由26.8 nm下降至24.8 nm。同时,高分辨X射线衍射仪测试表明475 ℃、5 Pa压差条件下的α-Ga₂O₃薄膜样品半峰全宽仅为190.8″,为高度结晶态的单晶α-Ga₂O₃薄膜材料。     

Structural Diversity of Silver Fluorinated β-Diketonates: Effect of the Terminal Substituent and Solvent

In order to demonstrate the role of the fluorination and some solvents in the structural organization of the Ag(I) coordination polymers with β-diketonate ligands (R¹C(O)C_αHC(O)R²)⁻ we synthesized a series of the compounds containing tfac- (R₁ = CH₃, R² = CF₃) and pfpac- (R₁ = CH₃, R² = C₂F₅) anions. Solvent-free [Ag(L)]_∞ (L = tfac 1, pfpac 2) compounds and the corresponding acetonitrile and toluene adducts have been characterized by elemental analysis and/or NMR, IR and single-crystal XRD. This series includes five new coordination polymers. Compound 1 is a 3D coordination framework based on Ag–O_{chelate/bridge}, Ag–C_α bonds, and argentophilic interactions. An increase in the fluorinated group leads to a chain coordination polymer 2 of an unusual structural organization. These chains can be represented as a “DNA-type”, where two intertwined helices based on Ag–O_chelate and Ag–C_α bonds are connected through Ag–O_bridge ones. Two structural types of chain coordination polymers, [Ag(tfac)(CH₃CN)] and [Ag₂(L)₂(solvent)], have been revealed for the adducts. The latter structural type differs significantly from the previously studied toluene and acetonitrile adducts of fluorinated Ag(I) β-diketonates of the same stoichiometry. Thermal analysis in helium showed that both 1 and 2 decompose to metallic silver with the compound of pfpac-ligand being slightly more stable.     

Comparison of Proton Acceptor and Proton Donor Properties of H2O and H2O2 in Organic Crystals of Drug-like Compounds: Peroxosolvates vs. Crystallohydrates

Two new peroxosolvates of drug-like compounds were synthesized and studied by a combination of X-ray crystallographic, Raman spectroscopic methods, and periodic DFT computations. The enthalpies of H-bonds formed by hydrogen peroxide (H₂O₂) as a donor and an acceptor of protons were compared with the enthalpies of analogous H-bonds formed by water (H₂O) in isomorphic (isostructural) hydrates. The enthalpies of H-bonds formed by H₂O₂ as a proton donor turned out to be higher than the values of the corresponding H-bonds formed by H₂O. In the case of H₂O₂ as a proton acceptor in H-bonds, the ratio appeared reversed. The neutral O∙∙∙H-O/O∙∙∙H-N bonds formed by the lone electron pair of the oxygen atom of water were the strongest H-bonds in the considered crystals. In the paper, it was found out that the low-frequency Raman spectra of isomorphous crystalline hydrate and peroxosolvate of N-(5-Nitro-2-furfurylidene)-1-aminohydantoin are similar. As for the isostructural hydrate and peroxosolvate of the salt of protonated 2-amino-nicotinic acid and maleic acid monoanion, the Raman spectra are different.     

Anti-Proteus Activity,Anti-Struvite Crystal,and Phytochemical Analysis of Sida acuta Burm. F. Ethanolic Leaf Extract

Proteus mirabilis is a significant cause of urinary tract infection that may contribute to struvite stones. Anti-infection of this bacterium and anti-struvite formation must be considered. Sida acuta Burm. F. (SA) has been used for the treatment of diseases related to kidneys. Therefore, we investigated the effects of the SA leaf ethanolic extract (SAEE) on growth and on virulent factors (swarming motility and urease activity) of Proteus mirabilis isolated from kidney stone formers. We also evaluated anti-struvite crystal formation and phytochemical constituents of SAEE. The minimum inhibitory concentrations (MICs) of SAEE against three clinical P. mirabilis isolates were 8 mg/mL. Intriguingly, the 1/2MIC of SAEE had significant inhibitory effects on the swarming motility and urease activity of clinical P. mirabilis isolates when compared with the condition without SAEE. The SAEE at the various concentrations significantly inhibited the average weights of struvite crystals in a dose-dependent manner, compared with the control. The phytochemical analysis revealed that SAEE contained catechin, chlorogenic acid, rutin, and ferulic acid. This study indicated that SAEE has anti-P. mirabilis and anti-struvite crystal activities via its bioactive compounds. For this reason, SAEE may be developed as a new agent for the treatment of struvite stone induced by P. mirabilis.     

Frequency-dependent acoustic energy focusing in hexagonal ceramic micro-scaffolds

Acoustic properties of an additive-manufactured SiC scaffold with hexagonal symmetry fabricated by the robocasting method are studied both numerically and experimentally. The numerical analysis is based on the finite element method (FEM) using Bloch boundary conditions. The calculations show both angular and frequency dispersion of the acoustic waves with wavelengths comparable to the spacing between the rods, i.e., on a millimeter scale, indicating interesting acoustic properties in the MHz range. The dispersion character leads to focusing of the energy propagation into the directions of the rods of the hexagonal structure. This is illustrated by modal-based calculations of the propagation of longitudinal and out-of-plane shear wave packets with a dominant wavelength. The experimental analysis consists of two steps, the measurement of the resonant spectrum and shear wave propagation character. The measured resonant spectrum is in good agreement with the one calculated using numerically obtained low-frequency properties of the structure, also showing the quality of the overall manufactured structure. The time-domain measurement shows significant changes in the energy propagation between low and high frequencies, as predicted by FEM calculations.