A new approach to the determination of the statistical segment length of wormlike polymers

The Stockmayer-Fixman-Burchard (SFB) and the Dondos-Benoit (DB) equations have been applied to determine the unperturbed dimensions parameterK of wormlike polymers. An empirical relation between the Flory's constant and the Mark-Houwink-Sakurada (MHS) exponenta has been proposed. The values found by this equation are lower than the value 2.5×10²³ used in the case of flexible polymers and this deviation is attributed to the influence of the draining effect. From theK value and the so calculated value of , we calculate the Kuhn statistical segment length of wormlike polymers. The obtained — for a great number of wormlike polymers — statistical segment lengths are almost the same as these calculated by the Yamakawa-Fujii and the Bohdanecky methods. The molecular mass regions in which the SFB, the DB, and the MHS equations are valid are explored. A criterion for the distinction between flexible and wormlike polymers is proposed based on the way of approach to the power law.     

反相高效液相色谱法的多波长同时测定预混合饲料中的脂溶性维生素A，α－E，D_3，K_3

反相高效液相色谱法的多波长同时测定预混合饲料中的脂溶性维生素Ａ，α－Ｅ，Ｄ＿３，Ｋ＿３李桂凤，李缙扬，郝征红，聂燕，孟兆宏，李学春（山东省农业科学院中心实验室济南２５０１００）１前言对脂溶性维生素的分析，被许多国内外分析专家认为是高难度的分析项目。本...     

蒸汽相转化法原位诱导沸石化制备Y-ZSM-5双沸石复合物

针对Y型沸石在ZSM-5沸石干胶制备及晶化过程中易于溶解、坍塌的问题,采用葡萄糖在水热处理条件下对Y沸石进行包膜处理,提高了Y沸石在高温、高碱度环境中的稳定性,并采用蒸汽相转化法制备了同时含有Y和ZSM-5的双沸石复合物。对影响沸石复合物形成的因素如Y沸石表面碳包膜改性、凝胶碱度、晶化时间等进行了详细讨论。采用X射线衍射（XRD）、扫描电子显微镜（SEM）、傅立叶变换红外（FT-IR）、N₂吸附-脱附,能谱（EDS）以及NH₃-TPD等手段对制备的材料进行了表征。结果表明通过蒸汽相转化法能获得Y和ZSM-5两相共存的双沸石复合物,产物中的ZSM-5沸石相前驱体随蒸汽处理时间的延长逐渐从蠕虫状无定型向纳米多晶ZSM-5沸石转变,纳米多晶聚集体与Y型沸石晶粒之间紧密相连,相互包埋。在异丙苯催化裂化反应中,合成的沸石复合物的活性和稳定性介于Y和ZSM-5之间,优于对应的机械混合物。     

Synthesis, Characterization and Properties of Novel Star-Shaped π-Conjugated Oligomers with Triphenylamine Core

Four new star‐shaped π‐conjugated oligomers ( TPA‐CZ3 , TPA‐TPA3 , TPA‐PTZ3 and TPA‐BT3 ) with triphenylamine as a core and different electron‐donating ability groups, carbazole, triphenylamine, phenothiazine and bithiophene, as peripheral units have been designed and synthesized via the Heck reaction. These oligomers show good solubility in common organic solvents. Their photophysical, electrochemical, electronic structure and charge transfer properties between these star‐shaped π‐conjugated oligomers and N,N′‐bis(1‐ethylpropyl)‐3,4:9,10‐perylene bis(tetracarboxyl diimide) (EP‐PDI) have been investigated by UV‐vis absorption spectra, photoluminescence (PL) spectra, cyclic voltammetry (CV) measurement, theoretical calculations and fluorescence quenching. The results show that the absorptions and fluorescences of TPA‐CZ3 , TPA‐TPA3 and TPA‐PTZ3 are red shifted with the electron‐donating ability of the peripheral unit increasing from carbazole to triphenylamine and phenothiazine. In addition, although the bithiophene group has a weaker electron‐donating ability than carbazole, triphenylamine and phenothiazine, the absorption and fluorescence of TPA‐BT3 have a red shift than those of TPA‐CZ3 , TPA‐TPA3 and TPA‐PTZ3 because TPA‐BT3 has a longer conjugation length than TPA‐CZ3 , TPA‐TPA3 and TPA‐PTZ3 . The triphenylamine core and the peripheral units can constitute a large conjugated structure. The fluorescence quenching properties indicate that efficient charge transfer can happen between the star‐shaped oligomers and EP‐PDI.     

Kinetics of the radical scavenging activity of β-carotene-related compounds

To clarify the non-enzymatic radical-scavenging activity of β-carotene-related compounds and other polyenes, we used differential scanning calorimetry to study the kinetics of radical polymerization of methyl methacrylate (MMA) by 2,2′-azobisisobutyronitrile (AIBN) or benzoyl peroxide (BPO) in the absence or presence of polyenes under nearly anaerobic conditions at 70°C, and analyzed the results with an SAR approach. The polyenes studied were all-trans retinol, retinol palmitate, calciferol, β-carotene and lycopene. Polyenes produced a small induction period. The stoichiometric factor (n) (i.e. the number of radicals trapped by each inhibitor molecule) of polyenes was close to 0. Tetraterpenes (β-carotene, lycopene) suppressed significantly more of the initial rate of polymerization (R ^inh) than did diterpenes (retinol, retinol palmitate). The inhibition rate constants (k ^inh) for the reaction of β-carotene with AIBN-or BPO-derived radicals were determined to be 1.2–1.6?×?10⁵ l?/?mol?s, similar to published values. A linear relationship between k ^inh and the kinetic chain length (KCL) for polyenes was observed; as k ^inh increased, KCL decreased. KCL also decreased significantly as the number of conjugated double bonds in the polyenes increased. Polyenes, particularly β-carotene and lycopene, acted as interceptors of growing poly-MMA radicals.     

Synthesis and Characterization of Amphiphilic Copolymer Acrylic Acid-co-p-Chloromethylstyrene

The free radical copolymerization of acrylic acid (M₁) with p-chloromethylstyrene (M₂) in dioxane and in the presence of α,α′-azobisisobutyronitrile (AIBN) at 65°C is reported. Copolymer compositions of six copolymer samples obtained from feed ratios of M₁:M₂ = 95.2:4.8 to 21.4:78.6 were determined by ¹H-NMR. The reactivity ratios of AA/p-CMS copolymerization system calculated by the F-R method were r ₁ = 0.50 ± 0.06 and r ₂ = 1.52 ± 0.15, almost the same as r ₁ = 0.43 ± 0.21 and r ₂ = 1.31 ± 0.14 by the extended K-T method. On the basis of the reactivity ratios of two monomers, the sequence length distribution in the AA/p-CMS copolymers was obtained. For f₂ = 4.77%, the monomer unit of p-CMS is individually separated in the chain of AA; for f₂ = 35.53%, the alternating tendency prevails and a large number of mono-sequences are formed. The number-average ( _n) and weight-average ( _w) molecular weights were determined by gel permeation chromatography. The effect on molecular weights of feed composition is also discussed. In the presence of constant initiator concentration, the gradual increase in the ratio of M₂:M₁ (from14.7:85.3 to 78.6:21.4) was accompanied by a decrease in molecular weights ( _n from 11907 to 3961).     

Determination of crack growth kinetics in non-reinforced semi-crystalline thermoplastics using the linear elastic fracture mechanics (LEFM) approach

The aim of this study was to find a satisfactory method to characterize the fatigue crack growth behavior of non-reinforced, semi-crystalline thermoplastic polymers using linear elastic fracture mechanics (LEFM). For this, crack growth curves (crack length versus cycle number) as well as crack growth kinetics curves (crack growth rate da/dN versus amplitude stress intensity factor ΔK) had to be generated. As methods suggested by ISO 15850 and ASTM E 647-11 failed to provide satisfactory results for the crack growth curves, a more advanced method was searched for and finally found in the literature. Regarding the crack growth kinetics curve, the idea of the calculation was based on methods recommended in ISO 15850 and ASTM E 647-11. However, these methods had to be considerably modified and improved in order to get accurate results with little scatter. The whole methodology was developed and verified with fatigue crack growth tests on two semi-crystalline thermoplastics (polyoxymethylene POM and polyetheretherketone PEEK).     

Comparison of two types of vertically aligned ZnO NRs for highly efficient polymer solar cells

Vertically aligned ZnO nanorods (NR) are prepared by two different syntheses methods and applied on polymer solar cells (PSCs). The ZnO electrodes work as the electron transport layer with the P3HT:PCBM blend acting as the active material. Several organic blend solution conditions are optimized: concentration, solvent, and deposition speed. The effect of different NR electrode morphologies is analyzed on the solar cell performance and characterized by current–voltage curves and IPCE analyses. The photovoltaic performance of the solar cells was observed to be influenced by many factors, among them infiltration of the organic P3HT:PCBM blend within the ZnO NR layer. The infiltration of the active layer was monitored by cross section SEM and energy dispersive X-ray spectroscopy analyses. Our results show that higher power conversion efficiencies are achieved when shorter NRs lengths are applied. The best power conversion efficiency obtained was 2.0% for a 400 nm ZnO NR electrode. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Influence of Urbach Energy,Temperature, and Longitudinal Position in the Active Layer on Carrier Diffusion Length in Perovskite Solar Cells

The diffusion length of charge carriers in the active layer of a perovskite solar cell (PSC) of the structure Glass/PEDOT: PSS/CH₃NH₃PbI₃/PC60BM/Al is modelled. It is found that the diffusion length depends on the position x in the active layer measured from the PEDOT: PSS interface, Urbach energy and temperature. By varying the voltage in the range from zero to , it is shown that the dependence of diffusion length on the position x in the active layer reduces at higher voltage. The combined influence of applied voltage and temperature on the diffusion length of charge carriers is investigated and it is found that in the low voltage range the diffusion length is temperature independent, but it becomes significantly temperature dependent at higher voltages. Also, it is found that the diffusion length decreases as the applied voltage increases and this reduction becomes much more significant at higher voltage and temperatures. The combined influence of applied voltage and Urbach energy on diffusion length of charge carriers reveals that the diffusion length decreases when both the applied voltage and Urbach energy increase. However, the reduction in the diffusion length due to the increase in Urbach energy becomes less significant at higher voltage.