Dispersion state and catalytic properties of vanadia species on the surface of V_2O_5/TiO_2 catalysts

The dispersion state and catalytic properties of anatase-supported vanadia species are studied by means of X-ray diffraction (XRD), laser Raman spectroscopy (LRS), H2 temperature-programmed reduction (TPR) and the selective oxidation of o-xylene to phthalic anhydride. The almost identical values of the experimental dispersion capacity of V2O5 on anatase and the surface vacant sites available on the preferentially exposed (001) plane of anatase suggest that the highly dispersed vanadium cations are bonded to the vacant sites on the surface of anatase as derived by the incorporation model. When the loading amount of V2O5 is far below its dispersion capacity, the dispersed vanadia species might mainly consist of isolated VOx species bridging to the surface through V-O-Ti bonds. With the increase of V2O5 loading the isolated vanadia species interact with their nearest neighbors (either isolated or polymerized vanadia) through bridging V-O-V at the expenses of V-O-Ti bonds, resulting in the increase of the ra     

PVC DISULFIDE AS CATHODE MATERIALS FOR SECONDARY LITHIUM BATTERIES

PVC disulfide (2SPVC) was synthesized by solution crosslink and its molecular structure was confirmed by infrared spectrum. 2SPVC's specific area is 36.1 m2·g-1 tested by stand BET method, and granularity experiment gives out the particle size of d0.5= 11.3μm. With SEM (Scanning Electron Microscope) experiment the surface morphology and particle shape of 2SPVC were observed. Cyclic voltammetry (scan rate: 0.5 mV·s-1) shows that 2SPVC experience an obvious S-S redox reaction in charge-discharge process. When 2SPVC was used as cathode material for secondary lithium battery in a 1 mol·L-1 solution of lithium bis(trifluoromethylsulfonyl) imide (Li(CF3SO2)2N) in a 5:45:50 volume ratio mixture of o-xylene (oxy), diglyme (DG) and dimethoxymethane (DME) at 30℃, the first discharge capacity of 2SPVC is about 400.3 mAh·g-1 which is very close to its theoretical value (410.5 mAh·g-1) at a constant discharge current of 15 mA·g-1. It can retain at about 346.1 mAh·g-1 of discharge capacity after 30 charge-discharge cycles. So 2SPVC is a very promising cathode candidate for rechargeable lithium batteries.     

Zhang–Zhang Polynomials of Multiple Zigzag Chains Revisited: A Connection with the John–Sachs Theorem

Multiple zigzag chains Zm,n of length n and width m constitute an important class of regular graphene flakes of rectangular shape. The physical and chemical properties of these basic pericondensed benzenoids can be related to their various topological invariants, conveniently encoded as the coefficients of a combinatorial polynomial, usually referred to as the ZZ polynomial of multiple zigzag chains Zm,n. The current study reports a novel method for determination of these ZZ polynomials based on a hypothesized extension to John–Sachs theorem, used previously to enumerate Kekulé structures of various benzenoid hydrocarbons. We show that the ZZ polynomial of the Zm,n multiple zigzag chain can be conveniently expressed as a determinant of a Toeplitz (or almost Toeplitz) matrix of size m2×m2 consisting of simple hypergeometric polynomials. The presented analysis can be extended to generalized multiple zigzag chains Zkm,n, i.e., derivatives of Zm,n with a single attached polyacene chain of length k. All presented formulas are accompanied by formal proofs. The developed theoretical machinery is applied for predicting aromaticity distribution patterns in large and infinite multiple zigzag chains Zm,n and for computing the distribution of spin densities in biradical states of finite multiple zigzag chains Zm,n.     

层状正极材料LiNi1/6Co1/6Mn2/3O2的制备及电池性能

0引言为解决目前日益严重的汽车尾气排放对城市空气造成污染问题,作为绿色能源的锂离子电池已成为动力电池的首选对象。国际上,高容量、大功率锂离子电池早于1995年已开始研制。1996年,我国天津电源研究所也进行了大容量锂离子蓄电池及电池组的探索[1]。目前,锂离子电池的正极材料是制约其大规模推广应用的关键。现研究的正极材料主要包括具有层状结构的LiCoO2,LiN iO2和LiM nO2及具有尖晶石结构的LiM n2O4等。其中LiC oO2作为目前唯一已经商业化的正极材料具有理论容量高、可循环性能好等优点,但因Co资源的相对缺乏导致其价格高昂。…     

High temperature enthalpy and heat capacity of GaN

The heat capacity and the heat content of gallium nitride were measured by calvet calorimetry (320-570 K) and by drop calorimetry (670-1270 K), respectively. The temperature dependence of the heat capacity in the form C_pm=49.552+5.440×10⁻³T−2.190×10⁶T⁻²+2.460×10⁸T⁻³ was derived by the least squares method. Furthermore, thermodynamic functions calculated on the basis of our experimental results and literature data on the molar entropy and the heat of formation of GaN are given.     

General constructions of biquandles and their symmetries

Biquandles are algebraic objects with two binary operations whose axioms encode the generalized Reidemeister moves for virtual knots and links. These objects also provide set theoretic solutions of the well-known Yang-Baxter equation. The first half of this paper proposes some natural constructions of biquandles from groups and from their simpler counterparts, namely, quandles. We completely determine all words in the free group on two generators that give rise to (bi)quandle structures on all groups. We give some novel constructions of biquandles on unions and products of quandles, including what we refer as the holomorph biquandle of a quandle. These constructions give a wealth of solutions of the Yang-Baxter equation. We also show that for nice quandle coverings a biquandle structure on the base can be lifted to a biquandle structure on the covering. In the second half of the paper, we determine automorphism groups of these biquandles in terms of associated quandles showing elegant relationships between the symmetries of the underlying structures.     

Molar heat capacities and volumes of transfer of cytosine,thymine, caffeine and 1,3-diethylthymine to aqueous solutions of glycyl-glycine and L-α-alanyl-L-α-alanine at 25°C

Densities and specific heat capacities of ternary aqueous systems containing dipeptides (glycyl-glycine or L--alanyl-L--alanine) and nucleic acid bases (cytosine or thymine) or their alkyl derivatives (1,3-diethylthymine or caffeine) were determined at 25°C by flow calorimetry and flow densimetry. The partial molar volumes and heat capacities of transfer at infinite dilution of the different nucleic acid bases from water to water+dipeptide solutions were obtained therefrom. Except for the case of the transfer of cytosine to aqueous glycyl-glycine solutions where a small positive dependence of the transfer quantities was observed with the dipeptide concentration, the values of the heat capacities of transfer were in general low, positive or negative, depending on the compensation of hydrophobic-hydrophilic interactions between the dipeptide and the base. The volumes of transfer of most of the bases are very small, within the limit of the experimental error.     

Performance of orthogonal frequency division multiplexing based M-ary quadrature amplitude modulation in asymmetrical dual-hop mixed RF-FSO transmission system

This paper investigates the performance of a dual-hop mixed relay system with radio frequency (RF) and free-space optics (FSO) communication under the effect of pointing error (PE) and atmospheric turbulence (AT). This paper considers a system where RF and FSO links are cascaded. The RF link is modeled by Nakagami-m fading, and the FSO link is modeled as gamma–gamma (G-G) fading channel. Both the channel models use orthogonal frequency division multiplexing (OFDM) with M-ary quadrature amplitude modulation (QAM). The expressions for probability density function, cumulative distribution function, signal-to-noise ratio, and ergodic capacity are derived. The moment generating function (MGF) of fading and the bit error rate (BER) of the OFDM-based M-ary QAM scheme is derived in terms of Meijer's G-function. It has been observed that, in fixed gain relay systems, the modulation scheme's BER is dominated by the SNR of the RF link. While in a variable gain relay system, the turbulence conditions of the FSO system affect the SNR and the BER of the modulation method. The feasibility of heterodyne detection and intensity modulation direct detection (IM/DD) is analyzed in terms of outage probability and ergodic capacity. The results can be used to choose the optimal modulation order and relay system for QAM-OFDM-based optical wireless systems.     

Unlocking the Capacity of Vanadium Oxide by Atomically Thin Graphene-Analogous V2O5·nH2O in Aqueous Zinc-Ion Batteries

Aqueous Zn-ion batteries (AZIBs) are promising due to their high theoretical energy density and intrinsic safety, and the natural abundance of Zn. Since low voltage is an intrinsic shortage of AZIBs, achieving super-high capacity of cathode materials is a vital way to realize high practical energy density, which however remains a huge challenge. Herein, the capacity increase of classical vanadium oxide cathode is predicted via designing atomic thickness of 2D structure to introduce abundant Zn²⁺ storage sites based on density functional theory (DFT) calculation; then graphene-analogous V₂O₅·nH₂O (GAVOH) with only few atomic layers is fabricated, realizing a record capacity of 714 mAh g⁻¹. Pseudocapacitive effect is unveiled to mainly contribute to the super-high capacity due to the highly exposed GAVOH external surface. In situ Raman and synchrotron X-ray techniques unambiguously uncover the Zn²⁺ storage mechanism. Carbon nanotubes (CNTs) are further introduced to design GAVOH-CNTs gel ink for large-scale cathode fabrication. The hybrid cathode demonstrates ultra-stable cycling and excellent rate capability and delivers a high energy density of 476 Wh kg⁻¹ at 76 W kg⁻¹; 228 Wh kg⁻¹ is still retained at high mass loading of 10.2 mg cm⁻². This work provides inspiration for breaking the capacity limit of cathode in AZIBs.     

CuI Encapsulated within Single-Walled Carbon Nanotube Networks with High Current Carrying Capacity and Excellent Conductivity

High current carrying capacity and high conductivity are two important indicators for materials used in microscale electronics and inverters. However, it is challenging to obtain high conductivity and high current carrying capacity at the same time since high conductivity requires a weakly bonded system to provide free electrons, while high current carrying capacity requires a strongly bonded system. In this paper, CuI@SWCNT networks by filling the single-walled carbon nanotubes (SWCNTs) with CuI is ingeniously prepared. CuI@SWCNT shows good stability due to the confinement protection of SWCNTs. Through the host-guest hybridization, CuI@SWCNT networks exhibit a current carrying capacity of 2.04 × 10⁷ A cm⁻² and a conductivity of 31.67 kS m⁻¹. Their current carrying capacity and conductivity are significantly improved compared with SWCNT. The Kelvin probe force microscopy measurements show a drop of surface potential energy after SWCNT filled with CuI, indicating that the CuI guest molecules regulate the position of the Fermi level of SWCNTs, increasing carrier concentration, achieving high conductivity and high current carrying capacity. This study offers ideas and solutions for the regulation of high-performance carbon tube networks, which hold great promise for future applications in carbon-based electronic devices.