Adsorption in columns packed with porous adsorbent particles having partially fractal structures

A mathematical model is constructed and solved that could describe the dynamic behavior of the adsorption of a solute of interest in single and stratified columns packed with partially fractal porous adsorbent particles. The results show that a stratified column bed whose length is the same as that of a single column bed, provides larger breakthrough times and a higher dynamic utilization of the adsorptive capacity of the particles than those obtained from the single column bed, and the superior performance of the stratified bed becomes especially more important when the superficial velocity of the flowing fluid stream in the column is increased to accommodate increases in the system throughput. This occurs because the stratified column bed provides larger average external and intraparticle mass transfer and adsorption rates per unit length of packed column. It is also shown that increases in the total number of recursions of the fractal and the ratio of the radii between larger and smaller microspheres that make up the partially fractal particles, increase the intraparticle mass transfer and adsorption rates and lead to larger breakthrough times and dynamic utilization of the adsorptive capacity of the particles. The results of this work indicate that highly efficient adsorption separations could be realized through the use of a stratified column comprised from a practically reasonable number of sections packed with partially fractal porous adsorbent particles having reasonably large (i) total number of recursions of the fractal and (ii) ratio of the radii between larger and smaller microspheres from which the partially fractal particles are made from. It is important to mention here that the physical concepts and modeling approaches presented in this work could be, after a few modifications of the model, applied in studying the dynamic behavior of chemical catalysis and biocatalysis in reactor beds packed with partially fractal porous catalyst particles.     

Temperature Effect on the Phase Behavior of the Systems Water/Sucrose Laurate/Ethoxylated‐mono‐di‐glyceride/Oil

The phase behavior of the systems water/sucrose laurate/ethoxylated mono‐di‐glyceride/oil was investigated as function of temperature and the weight ratio of EMDG in the mixed surfactants. The oils were R (+)‐limonene, isopropylmyristate, and caprylic‐capric triglyceride. This study demonstrates that the phase inversion temperature (PIT) decreases and the efficiency of the mixed surfactants (γ¯) increase as the weight ratio of the EMDG in the mixed surfactants increases. R (+)‐limonene gave lower phase inversion temperatures and higher efficiencies compared to isopropylmyristate, and caprylic‐capric triglyceride. The solubilization capacity of the system water/sucrose laurate/oil increased upon the addition of ethoxylated mono‐di‐ glyceride which stabilize the surfactant layer and increase the interfacial area.     

Differential 3ω calorimeter

We have developed a new dynamic calorimeter using the differential 3ω detection method. The differential 3ω calorimeter is capable of measuring dynamic heat capacity of liquid samples. The new calorimeter consists of a Wheatstone bridge made of two identical heater/sensors, and is based on the sensitive null detection method. The balancing is done automatically at all frequencies and is independent of temperature; once a sample is placed on one heater/sensor, a third harmonic signal is produced due to the difference in the two arms of the bridge. The differential 3ω calorimeter provides enhancements over traditional dynamic methods in dynamic range (up to 30 kHz), resolution, and ease of operation.     

Investigation of the thermophysical properties of polymers by the temperature wave technique

The technique of temperature waves to measure the complex thermophysical characteristics of materials has been proposed. The relations for the moduli and arguments of these characteristics for the case of plane temperature waves have been calculated. The temperature dependences of the moduli and arguments of complex thermophysical characteristics of polyvinylacetate (PVAc) at different frequencies and also the temperature dependences of its vibrational and configurational heat capacities have been determined. It has been shown that the vibrational heat capacity of PVAc in the region of softening grows sharply and its configurational heat capacity goes through a peak. The segmental mobility has been found to affect the heat transfer in the polymer in an ambivalent way causing both a decrease and increase of thermal conductivity.

---

Zusammenfassung Zur Bestimmung der komplexen thermophysischen Eigenschaften von Stoffen wurde eine Temperaturwellentechnik vorgeschlagen. Für den Fall zweidimensionaler Temperatur-wellen wurden die Verhältnisse von Moduli und Argumenten dieser Eigenschaften berechnet. Die Temperaturabhängigkeit von Moduli und Argumenten der komplexen thermophysischen Eigen-schaften von Polyvinylacetat (PVAc) bei verschiedenen Frequenzen und auch die Temperatur-abhängigkeit seiner Vibrations- und Konfigurations-Wärmekapazitäten wurden bestimmt. Es wurde gezeigt, daß die Vibrations-Wärmekapazität von PVAc im Erweichungsbereich scharf zunimmt und die Konfigurations-Wärmekapazität durch einen Peak geht. Man fand, daß die Segment-Mobilität den Wärmetransport im Polymer auf eine ambivalente Weise beeinflußt, in dem die Wärmeleit-fähigkeit entweder gesenkt oder angehoben wird.

     

Application of a chemical equilibrium model to thermodynamic functions of transfer of alcohols from water to aqueous surfactants

In ternary aqueous solutions, hydrophobic solutes such as alcohols tend to aggregate with surfactants to form mixed micelles. These systems can be studied by meas of the functions of transfer of hydrophobic solutes from water to aqueous solutions of surfactant. These thermodynamic functions often go through extrema in the critical micellar concentration (CMC) region of the surfactant. A simple model based on interactions between surfactant and hydrophobic solute monomers, on the distribution of the hydrophobic solute between water and the micelles and on the shift in the CMC induced by the hydrophobic solute, can simulate the magnitude and trends of the transfer functions using parameters which are mostly derived from the binary systems. In order to check the model more quantitatively, volumes and heat capacities of transfer of alcohols from water to aqueous solutions of a nonionic surfactant, octyldimethylamine oxide, were measured. A quantitative agreement was achieved with three adjustable parameters. Good fits are also obtained for the transfers to the ionic surfactants, octylamine hydrobromide and sodium dodecylsulfate. When the equilibrium displacement contribution is small, the distribution constants and the partial molar properties of the alcohols in the micellar phase agree well with the parameters obtained with similar models.     

Vibrational Properties of LaNb0.8M0.2O4-δ (M=As,Sb, V,and Ta)

LaNb_0.8M_0.2O_4-δ (where M=As, Sb, V, and Ta) oxides with pentavalent elements of different ionic sizes were synthesized by a solid-state reaction method. The vibrational properties of these oxides have been investigated. These studies revealed that the substituent element influences both Debye temperature value as well as the Raman active vibrational modes. Additionally, the low-temperature vibrational properties of LaNb_0.8Sb_0.2O_4-δ have been determined to show the phase transition occurrence at 260 K which is lower than previously reported.     

Acetylene-Mediated Borophosphene Dirac Materials as Efficient Anode Materials for Lithium-Ion Batteries

Generally, graphynes have been generated by the insertion of acetylenic content (−C≡C−) in the graphene network in different ratios. Also, several aesthetically pleasing architectures of two-dimensional (2D) flatlands have been reported with the incorporation of acetylenic linkers between the heteroatomic constituents. Prompted by the experimental realization of boron phosphide, which has provided new insights on the boron-pnictogen family, we have modelled novel forms of acetylene-mediated borophosphene nanosheets by joining the orthorhombic borophosphene stripes with different widths and with different atomic constituents using acetylenic linkers. Structural stabilities and properties of these novel forms have been assessed using first-principles calculations. Investigation of electronic band structure elucidates that all the novel forms show the linear band crossing closer to the Fermi level at Dirac point with distorted Dirac cones. The linearity in the hole and electronic bands impose the high Fermi velocity to the charge carriers close to that of graphene. Finally, we have also unravelled the propitious features of acetylene-mediated borophosphene nanosheets as anodes in Li-ion batteries.     

Methods for enhancing the capacity of electrode materials in low-temperature lithium-ion batteries

Lithium-ion batteries(LIBs) have evolved into the mainstream power source of ene rgy sto rage equipment by reason of their advantages such as high energy density,high power,long cycle life and less pollution.With the expansion of their applications in deep-sea exploration,aerospace and military equipment,special working conditions have placed higher demands on the low-temperature performance of LIBs.However,at low temperatures,the severe polarization and inferior electrochemical activity of electrode materials cause the acute capacity fading upon cycling,which greatly hindered the further development of LIBs.In this review,we summarize the recent important progress of LIBs in low-temperature operations and introduce the key methods and the related action mechanisms for enhancing the capacity of the various cathode and anode materials.It aims to promote the development of high-performance electrode materials and broaden the application range of LIBs.     

二次离子电池高比容量负极碳载体的研究进展

二次离子电池商业化负极石墨的比容量已接近理论比容量. 合金型负极和金属负极因具有高比容量而受到广泛关注, 但其循环性能差和安全性问题限制了实际应用, 据此提出载体设计策略. 碳材料具有来源广泛、 易于调控等特性, 常用作二次离子电池高比容量负极的载体. 本文从碳载体的孔结构、 比表面积、 电子导电率、 离子导电率、 杂原子掺杂和界面修饰的角度出发, 综述了其在硅基、 磷基、 锗基、 锡基负极以及金属锂、 钠等负极中的研究进展, 展望了碳载体的发展前景和方向.     

Antioxidant capacity and antibacterial activity from Annona cherimola phytochemicals by ultrasound-assisted extraction and its comparison to conventional methods

In recent years, the food, pharmacy, and cosmetic industries have focused on the search of natural compounds with antimicrobial and antioxidant properties; commonly, these compounds are obtained from Kingdom plantae. The aim of the present work is comparing antibacterial and antioxidant capacity of Annona cherimola Mill leaves, using different extraction methods. The ultrasound assisted extraction technique (UAE) was compared with conventional techniques: Soxhlet and maceration. Water and ethanol were used as solvents for leaves extractions performed with these three methods. The main acetogenins reported in Annona cherimola Mill and Annona muricata L. species were simulated using the functional hybrid B3LYP and to confirm its presence, analysis of the compound composition was performed using FT-IR, UV–Vis and HPLC. Total phenolics (TP) and flavonoids (TF) were determined by spectroscopy techniques and novel Differential Pulse Voltammetry (DPV) electrochemical technique. Total Antioxidant Capacity (TAC) of the extracts was measured, using the DPPH, FRAP and CUPRAC techniques. The highest antioxidant content was found in the Soxhlet water extracts; even so, the UAE technique presented an attractive alternative due to considerable reduction in extraction time, which was greater than 99%, and possible selectivity in compounds extraction. Finally, antibacterial activity of the extracts was evaluated, obtaining the best results against gram-positive bacteria using UAE water extract. In this way, the UAE technique presents an excellent extraction option due to the considerable reduction in time and energy, as well as the increase in antibacterial activity.