非均匀介质中对称耦合三线的传输矩阵

采用新的方法推导出非均匀介质中对称耦合三线的传输矩阵 ( T参数 )解析表达式 ,给出了以正规模式参量描述的 T参数表达式。所得 T参数表达式形式简明 ,物理概念明晰。将无损状态下的 T参数通过矩阵分块运算推导 S参数 ,与文献结果进行了验证。验证结果表明所得 T参数解析表达式的正确性和本文方法的有效性。非均匀介质中对称耦合三线的 T参数解析表达式的导出为其在微波集成电路及三维 (多层 )微波集成电路中的应用提供了有力的理论工具。     

LTE FDD链路预算及覆盖估算方法研究

详细阐述了LTE FDD系统上下行链路预算方法、参数取值、如何基于链路预算得到的MAPL估算小区覆盖半径和单站覆盖面积,还通过链路预算和小区覆盖半径估算实例明确了LTE FDD系统链路预算及覆盖估算需关注的若干问题。     

CCD相机调制传递函数的测试原理分析

对于CCD相机的空间分辨率特性,通常用调制传递函数来表征.基于调制传递函数理论分析值与具体的实验测试值存在差别,分别对分辨率板在焦平面所成的像与CCD像元之间的偏移量和积分时间内被摄物体与相机的相对运动产生的像移对相机调制传递函数的影响进行了分析.讨论了调制传递函数与对比调制传递函数之间的联系和区别.     

LD泵浦OF耦合NYAB自倍频激光器的初步研究

研制出国内第一台LD泵浦OF耦合NYAB自倍频激光器,产生0.531μm的线偏振绿色激光。基横模运转,阈值泵浦功率为14mW,输出功率达3.6mW,斜效率达3％,偏振度大于99.8％。     

Design of Large-aperture and Wide-band Optical Lens

The design of a large-aperture and wide-band optical lens for camera is presented. By utilizing the atmospheric window of infrared light, clear images can be achieved in the dark or poor visibility conditions. To use near-infrared and visible light to obtain images, the charge coupled device(CCD) is adopted as the image sensor of the lens with the center wavelength of 880 nm, which operates at the wavelength range from 400 nm to 1 000 nm. After calculating the parameters of optical lens, Sunnah type is selected as the initial structure. Through the optimization of optical design software ZEMAX, the lens obtains an excellent imaging performance. The modulation transfer function(MTF) can be more than 0.3 at the spatial frequency of 110 lp/mm, and the maximum distortion can be less than 0.1%.     

Transmission-type SPR sensor based on coupling of surface plasmons to radiation modes using a dielectric grating

A transmission-type surface plasmon resonance (SPR) sensor is presented. In the transmission-type SPR structure, surface plasmon waves are outcoupled to radia-tion modes by the use of dielectric grating on a thin-film layer of Ag. Compared with the traditional reflection-type SPR sensor, the new method provides larger detectable range, which might be useful to investigate thick targets such as in cell analysis. Theoretical simulations show that the structures provide high transmission efficiency for surface plasmon resonance and the devices present extre-mely linear sensing characteristics. Furthermore, it is found that the transmission efficiency and the refractive index detection sensitivity of the SPR sensor can be improved by the use of a lower refractive index glass prism.     

高深宽比金属光栅制备及中红外波段传感特性

利用纳米压印结合溅射和反应离子刻蚀工艺制备了具有高深宽比的金光栅,使用傅里叶变换红外光谱仪测得了反射谱线.测量结果显示,只在p偏振光垂直于光栅矢量方向入射条件下才存在共振反射峰,证明了“伪表面等离子体激元波”的存在.基于严格耦合波分析理论计算了金属光栅的反射率,研究了其作为中红外波段波长调制型表面等离子体共振传感器的可行性.数值计算表明负级次衍射光波对应的共振反射峰的移动能获得较高的波长灵敏度.对于深宽比为10的金光栅结构,+1级次和-3级次衍射光波对应的波长灵敏度分别为1600 nm/RIU和5000 nm/RIU,品质因子分别为20 RIU-1和60RIU-1.     

Total Variation and Multisymplectic Structure for CNLS System

The relation between the total variation of classical field theory and the multisymplectic structure is shown. Then the multisymplectic structure and the corresponding multisymplectic conservation of the coupled nonlinear Schrodinger system are obtained directly from the variational principle.     

滚磨工艺对压电陶瓷振子性能的影响

介绍行星式滚磨工艺在压电陶瓷频率元件制造过程的应用,对压电陶瓷振子的频率具有调整作用。在给出不同滚磨试验条件下得到不同的滚磨结果。结果分析得出滚磨工艺影响压电陶瓷振子性能的关键因素,确定了滚磨条件。压电陶瓷频率元件产品的主要指标——振子频率控制精度要求越来越高,通过行星式滚磨机的滚磨加工,实现频率精细调整的目的。     

利用Ni纳米岛模板制备半极性晶面GaN纳米柱

报道了在GaN表面以Ni纳米岛结构作为模板,利用电感耦合等离子(ICP)刻蚀制备GaN纳米柱的研究结果。原子力显微镜(AFM)测试结果表明,金属Ni薄膜在快速热退火(RTA)作用下形成了平均直径和高度大约分别为325 nm和70 nm的纳米岛状结构。通过电子扫描显微镜(SEM)照片看出,以GaN表面所形成的Ni纳米岛作为模板图形,通过控制ICP刻蚀时间,在一定的刻蚀时间内(2 min)获得有序的并拥有半极性晶面的GaN纳米柱阵列。这种新颖的半极性GaN纳米柱作为氮化物量子阱或者超晶格结构的生长模板,可以有效减小甚至消除极化效应,提高光电子器件的效率和性能。