Photochromic Free MOF‐Based Near‐Infrared Optical Switch

We demonstrate herein an all‐optical switch based on stimuli‐responsive and photochromic‐free metal–organic framework (HKUST‐1). Ultrafast near‐infrared laser pulses stimulate a reversible 0.4 eV blue shift of the absorption band with up to 200 s^?1 rate due to dehydration and concomitant shrinking of the structure‐forming [Cu₂C₄O₈] cages of HKUST‐1. Such light‐induced switching enables the remote modulation of intensities of photoluminescence of single crystals of HKUST‐1 as well visible radiation passing through the crystal by 2 order of magnitude. This opens up the possibility of utilyzing stimuli‐responsive MOFs for all‐optical data processing devices.     

A Photochemical/Thermal Switch Based on 4,4′-Bis(benzimidazolio)stilbene: Synthesis and Supramolecular Properties.

Stilbene derivatives are well-recognised substructures of molecular switches based on photochemically and/or thermally induced (E)/(Z) isomerisation. We combined a stilbene motif with two benzimidazolium arms to prepare new sorts of supramolecular building blocks and examined their binding properties towards cucurbit[n]urils (n=7, 8) and cyclodextrins (β-CD, γ-CD) in water. Based on the ¹H NMR data and molecular dynamics simulations, we found that two distinct complexes with different stoichiometry, i. e., guest@β-CD and guest@β-CD₂, coexist in equilibrium in a water solution of the (Z)-stilbene-based guests. We also demonstrated that the bis(benzimidazolio)stilbene guests can be transformed from the (E) into the (Z) form via UV irradiation and back via thermal treatment in DMSO.     

一种新的与偏振无关的双向2×2光开关的设计

设计了一种由偏振光分束器(PBS)、位相型空间光调制器(PSLM)、反射镜、半波片(HWP)和1/4波片(QWP)构成的2×2光开关.该光开关所用器件少,具有结构紧凑规整、功能的实现与信号光的偏振态无关以及可以完成双向交换等特点.进而通过2×2光开关的级连,设计了一种与偏振无关的4×4光开关的实验模块.     

基于MLX90621红外传感器的开关柜温度无线监测系统设计

介绍了一种基于MLX90621红外传感器的开关柜 母线接头温度无线监测系统。采用STM32微控制器、MLX90621红 外传感器和nRF24L01无线通讯模块,设计了这种温度无线采集系统 的硬件和软件部分。通过非接触式MLX90621红外传感器阵列 可实时采集高压开关柜的母线接头温度。其数据可通过nRF24L01通讯模 块和串口上传给上位机进行显示。由于具有成本低、稳定性 高、抗干扰强等优点,该系统适用于开关柜内部的复杂磁场环境。     

交叉相位调制对非线性光纤环镜中光脉冲传输的影响

基于耦合非线性薛定谔方程,采用分步傅里叶方法分析了在单波长信道和WDM（波分复用）4波长信道中XPM（交叉相位调制）对高速NOLM（非线性光纤环镜）光开关中脉冲传输的影响.数值计算表明：XPM造成NOLM中信号脉冲串扰与畸变,并造成NOLM开关性能的下降.WDM系统NOLM光纤环中的同向传播的各波长之间的XPM串扰比相向脉冲之间的XPM效应的影响更大,并且波长越短输出功率越低,中间信道受XPM的影响所导致的脉座现象和走离效应比两侧波长信道严重.     

多色矢量高斯-谢尔模型光束的焦移和焦开关

从交叉谱密度矩阵的传输公式出发,对多色矢量高斯-谢尔模型（GSM）光束的焦移和焦开关作了详细的研究.插入偏振片之前,多色矢量高斯-谢尔模型（GSM）光束通过硬边光阑透镜分离光学系统后,有焦移,但无焦开关;而插入偏振片之后,会出现焦开关.改变偏振片的旋转角度可以控制焦开关的特性.     

缺陷态透射率可调的三缺陷层的一维光子晶体

利用传输矩阵方法,从理论上研究了三缺陷层一维光子晶体的光学性质.在缺陷层间距足够大以致于出现缺陷态简并的情况下,调节第一或第三个缺陷层的光学厚度,光子晶体缺陷态的透射率会发生最大程度的变化.这种结构可同时具有窄带滤波器和光开关的功能,据此提出了一种低阈值光开关的设计.把折射率可调的向列型液晶作为晶体的第三个缺陷层,并用4×4传输矩阵方法计算了其缺陷态透射率与电场电压的关系.     

基于3×3平行排列耦合器的全光光开关的特性分析

提出了一种新型的基于3×3平行排列耦合器的全光光开关。此种光开关具有两个独立的输出端口且具有极好的偏振稳定性,消光比可达20dB。介绍了其工作原理,详细分析了信号光强度、控制光强度、光纤长度及耦合器分光比偏差等因素对各端口消光比的影响。比较了不同种类和长度光纤环的开关性能,首次得到了耦合器分光比偏差对消光比的影响曲线。     

280mm×280mm口径单脉冲过程电光开关

用于高功率惯性约束聚变(ICF)激光驱动器的大口径电光开关均采用等离子体电极泡克耳斯盒。与传统的等离子体电极电光开关原理不同,单脉冲过程驱动电光开关没有独立的大电流等离子体发生单元,而只是通过具有较高幅值的正负开关脉冲完成对大口径电光开关的驱动。介绍单脉冲过程驱动等离子体电极泡克耳斯盒电光开关的设计,并建立280 mm×280 mm口径电光开关实验平台,利用连续激光器测试了电光开关特性,实验测得该电光开关中心处开关效率为99.3%,开关上升时间为90 ns。     

PERFORMANCE ANALYSIS OF THE N × N NON-BLOCKING PACKET SWITCH WITH M/M/C PATH AT HEAD-OF-LINE

This paper focuses on a general model M/M/C queue for the switch path application, solving the case when packets at the head-of-line position have the same destination. These packets can pass through C paths to the same output port simultaneously. There are two types of service: the first in first out (FIFO) and the random order of service (ROS). Research concludes that among three switching paths, the response time of the FIFO type, under 70 per cent load condition, is better than that of the ROS type by 10 per cent. The theory of the binary hypercube is also used as a model for finding the steady-state probability (P₀₀₀) in the case of zero packets in the system. Using P₀₀₀ to determine performance, the authors’ proposed approach is shown to be superior to previously suggested methods.