硫化镉纳米荧光探针荧光猝灭法测定痕量铜

制备了无机纳米溶胶CdS，研究了纳米粒子的大小和荧光性质，以该纳米粒子为探针，建立了荧光猝灭法测定铜离子的新方法。该方法已成功用于人发样品测定，方法简单，快速，选择性好，灵敏度高，在最佳实验条件下，测定铜离子的线性区间为2．0－24．0μg/L，检出限为0．23μg/L。     

铜催化下格氏试剂与α,ω-二溴代烷的偶合反应

七十年代发展了铜催化下格氏试剂与卤代物、磺酸酯、酰卤的选择性交叉偶合反应,以后对这类反应并未深入研究。我们以几种铜     

呋喃甲醛缩二乙撑三胺希夫碱铜配合物的合成及结构(英)

A novel copper(Ⅱ) complex CuL(NO₃)₂(where L=N,N′-bis(furaldehyde)-diethylenetriamine) was synthesized and characterized by X-ray crystallography analysis. The crystal belongs to monoclinic, space group C2/c with cell parameters a=1.924 0(6) nm, b=0.792 8(3) nm, c=2.504 1(8) nm, β=111.163(5)°, and Z=8. The coordination geometry around Cu(Ⅱ) is a distorted trigonal-bipyramid，and one-dimensional chain is formed through intermolecular hydrogen bonds. CCDC: 255629.     

溴化环氧/Novolacs体系在CEM-3板中的应用

分别以PN、BPFN和BPAN为溴化环氧A80的固化剂,以DMP-30、HMTA和2-MZ为促进剂制备CEM-3覆铜板,研究了这三种线型酚醛树脂作为固化剂对CEM-3覆铜板力学性能、电性能、吸水性和耐热性等的影响.结果表明,以三种线型酚醛树脂为固化剂制备的CEM-3覆铜板的力学性能相近,而吸水性由高至低的顺序为PN＞BPFN＞BPAN,介电性能由高至低的顺序为BPFN≈BPAN＞PN,Tg由高至低的顺序为PN＞BPFN＞BPAN.由BPAN和BPFN为固化剂制备的CEM-3覆铜板经150℃/2h后处理,耐变色性明显优于PN为固化剂制备的CEM-3覆铜板.     

铜(Ⅰ)配合物[Cu(C8H4O2F3S)(PPh3)2]合成、性质、晶体结构及反应机理的探讨

Reaction of copper powder with 2-thenoyltrifluoroacetone and PPh₃ yielded the complex [Cu(C₈H₄O₂F₃S)(PPh₃)₂], which have been characterized by elemental analysis and IR spectra. The crystal is monoclinic, space group P2₁/n , a=1.0584(1), b=1.6738(1), c=2.2728(9) nm; β =94.22(2); V =4.0152 nm 3; Z=4; D_c=1.299 g·cm^-3; R=0.048, R_W=0.054. Copper (Ⅰ) ion is coordinated by two O and two P atoms forming distorted tetrahedron.     

超细Ni-Cu-Co-La的制备及其催化乙腈加氢性能

以水合肼和硼氢化钾为共还原剂制备了四元合金催化剂Ni-Cu-Co-La,并将其应用于乙腈催化加氢反应.采用X射线衍射、X射线光电子能谱、透射电镜和H2程序升温脱附对催化剂进行了表征,考察了催化剂组分对乙腈选择性加氢制乙胺催化性能的影响.结果表明,Cu,Co和La的加入均不同程度地提高了催化剂的活性和选择性,在反应压力1.8 MPa,反应温度120℃,反应时间1 h的条件下,乙腈转化率和乙胺选择性分别为100%和98.24%,优于使用Raney Ni、非晶态Ni-B和Co-B合金催化剂时的结果.     

Accelerated Hydrolysis of p-Nitrophenyl Picolinate Catalyzed by Metallomicelle Made from a Novel Macrocyclic Polyamine Copper（Ⅱ） Complex

A copper（Ⅱ） complex 1 of a novel macrocyclic polyamine ligand with hydroxylethyl pendant groups, 4,11-bis（hydroxylethyl）-5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane （L） has been synthesized and characterized. Rate enhancement for hydrolysis of p-nitrophenyl picolinate （PNPP） catalyzed by 1 was studied kinetically under Brij35 micellar condition. For comparision, the catalytic activity of corresponding copper（Ⅱ） complex 2 of non-substituted macrocyclic polyamine ligand, 5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraaza-cyclotetradecane （L＇） toward the hydrolysis of PNPP was also investigated. The results indicate that the macrocyclic polyamine copper（Ⅱ） complex 1 effectively catalyzed the hydrolysis of PNPP, and the pendant ligand hydroxyl group or deprotonated pendant ligand hydroxyl group can act as catalytically active species in the reaction. A ternary Complex kinetic model involving metal ion, ligand and substrate has been proposed, and the results confirmed the reasonability of such kinetic model.     

增敏双波长光度法同时测定底泥中的铜和铬

在pH6．4的磷酸二氢钾-磷酸氢二钾缓冲液和CIMAJB、正丁醇、正庚烷组成的微乳液的介质中，水杨基荧光酮与铜（Ⅱ）、铬（Ⅵ）的显色体系灵敏度都有很大提高，选择了合适的测定波长，利用双波长解方程组法同时测定了底泥中的铜和铬。结果令人满意。     

铜基催化剂的结构、物性及其对混合碳四选择加氢反应的催化性能

 用XRD，XPS，SEM和H2－TPR等手段研究了铜基负载型催化剂的结\r\n构和物性及其对混合碳四加氢脱炔的催化性能．结果表明，在负载铜催\r\n化剂中加入一定量的Co可提高催化剂的加氢脱炔活性，而Co含量较少时\r\n加入少量的Ce也能提高催化剂的活性和选择性．Cu和Co之间存在着相互\r\n协同作用，使得活性组分在催化剂表面偏析，CuO在催化剂表面呈非晶\r\n相分散状态，催化剂颗粒粒径变小，催化剂更容易被还原，从而改善了\r\n催化剂的催化性能．     

A Novel Cu-Mo／ZSM-5 Catalyst for NOx Catalytic Reduction with Ammonia

The Cu-Mo/ZSM-5 catalysts with different Cu/Mo ratios were prepared by wet impregnation method, and their catalytic performance for selective catalytic reduction of NOx was studied. The results showed that Cu-Mo/ZSM-5 is a very effective catalyst for NOx catalytic reduction with ammonia, especially when Cu/Mo molar ratio is about 1.5. It not only exhibited the extremely high catalytic activity, but also showed good stability for 02. The bulk phase structure of Cu-Mo/ZSM-5 catalysts was determined by XRD technique, and the results indicated that there is a maximum dispersion for Cu species when Cu/Mo molar ratio is 1.5, and an interaction between Cu and Mo along with HZSM-5 may be present in Cu-Mo/ZSM-5, which may possibly result in a special structure favorable for the catalytic reduction of NOx over Cu-Mo/ZSM-5 catalyst.