一种新的高次边缘元方法

讨论了一种新的高次边缘元方法，它不仅消除了伪解，并具有简单高效的特点．着重研究了二次边缘元的空间构造；给出了有关计算公式．对具有精确解的条形介质填充波导主模和高次模本征值的计算表明：二次边缘元方法的计算精度比一次边缘元提高约一个数量级．块状介质填充和衬底各向异性的微带线主模色散曲线的计算证实了该方法的精确性和广泛的适用性．     

3mm波段极近距离雷达

提出一种极近距离雷达概念，并导出其作用距离公式，在此基础上研制出一台３ｍｍ波段极近距离多普勒雷达样机．试验结果表明该雷达结构简单，成本低廉，在作用距离为零点几米至几米范围内可获得较高的定距精度．     

单模光纤中模耦合微扰功率谱与偏振关系的研究

提出用测量光纤偏振耦合率来确定模耦合系数，从而得到耦合微扰功率谱与双折射关系。它给出了光纤拉制中微扰作用 的信息，是研制偏振光纤的一种有效方法。     

光纤的淬冷增强原理

本文从拉丝工艺技术的角度出发，讨论了高速、高温拉丝工艺方法对光纤的淬冷增强原理。     

自聚焦棒耦合性能的分析

本文采用光线光学的原理分析了自聚焦棒（ＧＲＩＮ）的光学性能，在折射率分布为抛物线近似的条件下，推导出较为简单的ＧＲＩＮ中的光线轨迹方程，并实验测量了ＧＲＩＮ的耦合效率，从而由理论和实验两方面讨论ＧＲＩＮ的聚焦特性。     

含氰基的酚醛树脂及其碳纤维复合材料

含氰基的酚醛树脂，具有优异的耐高温性能和高温下的机械强度，在３１５℃下性能变化甚小；不着火，发烟量低，有良好的加工成型性能。热固化过程中氰基成三嗪环而交联，没有小分子脱出，是一类具有广泛发展前景的新型热固性树脂。     

Carbon–epoxy composites based on fibers coated with nylon 6,6: hygrothermal ageing versus interlaminar shear strength

Carbon fibers were coated in situ with a thin film of polyhexamethylene adipamide by an interfacial polycondensation technique. The modified fibers were used for the preparation of epoxy-based unidirectional composites. Specimens of these materials were immersed in water until equilibrium conditions were attained. The weight gain at equilibrium was determined as a function of the immersion temperature, the fiber volume fraction and the polyamide content deposited on the fibers. Water penetration in specimens made with uncoated carbon fibers increases when the volume fraction decreases. Introduction of the polyamide interlayer initially increases the water absorption, but reduces it at higher immersion temperatures and/or higher polyamide contents. The treated specimens were subjected to the short beam test to determine the interlaminar shear strength (ILSS). The data show that the ILSS decreases with water penetration but increases when the immersion temperature increases from 40 to 70°C. The overall performance encountered is discussed in terms of the possible roles of the polyamide interphase while taking into account mechanisms concerned with matrix plasticization, interphase degradation and residual stress relaxation.     

K0.9Li0.1（Ta0.5Nb0.5）O3晶体压电应变系数的测量

用准静态ｄ＿（３３）测量仪和干涉法相结合。测量了Ｋ＿（０．９）Ｌｉ＿（０．１）（Ｔａ＿（０．５）Ｎｂ＿（０．５）Ｎｂ＿（０．５））Ｏ＿３晶体的压电应变系数。结果为：ｄ＿（３３）＝８６．０，ｄ＿（３３）＝一２９．５，ｄ＿（１５）＝１１２．９×１０￣（－１２）Ｃ／Ｎ．     

YAG激光打标机光笔中会聚出纤光的光学系统

智能化大幅面激光打标机中的光笔,采用本文叙述的光学系统会聚多模石英光纤出射的大功率YAG激光,通常能以小于0.2mm的线宽长时间连续地在工件上刻划,仔细调焦后线宽达0.1mm;手持此光笔可进行人工刻写、画及焊接电子元件等.