Oxidative chemical polymerization of pyrrole

A reaction calorimeter has been used to determine at three different temperatures the enthalpy values for the polymerization of pyrrole dissolved in acetonitrile, by using FeCl₃ as the oxidative agent. From the calorimetric data it has been found that the reaction is first-order with respect to the pyrrole. The rate constants at the same temperatures have also been determined. By using the Arrhenius equation we have obtained the activation energy for the formation of this electroconducting polymer.Financial support from the italian National Research Council (CNR) is gratefully acknowledged.     

Fluorene‐based alternating polymers containing electron‐withdrawing bithiazole units: Preparation and device applications

We report here the synthesis via Suzuki polymerization of two novel alternating polymers containing 9,9‐dioctylfluorene and electron‐withdrawing 4,4′‐dihexyl‐2,2′‐bithiazole moieties, poly[(4,4′‐dihexyl‐2,2′‐bithiazole‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PHBTzF) and poly[(5,5′‐bis(2″‐thienyl)‐4,4′‐dihexyl‐2,2′‐bithiazole‐5″,5″‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PTHBTzTF), and their application to electronic devices. The ultraviolet–visible absorption maxima of films of PHBTzF and PTHBTzTF were 413 and 471 nm, respectively, and the photoluminescence maxima were 513 and 590 nm, respectively. Cyclic voltammetry experiment showed an improvement in the n‐doping stability of the polymers and a reduction of their lowest unoccupied molecular orbital energy levels as a result of bithiazole in the polymers' main chain. The highest occupied molecular orbital energy levels of the polymers were ?5.85 eV for PHBTzF and ?5.53 eV for PTHBTzTF. Conventional polymeric light‐emitting‐diode devices were fabricated in the ITO/PEDOT:PSS/polymer/Ca/Al configuration [where ITO is indium tin oxide and PEDOT:PSS is poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonic acid)] with the two polymers as emitting layers. The PHBTzF device exhibited a maximum luminance of 210 cd/m² and a turn‐on voltage of 9.4 V, whereas the PTHBTzTF device exhibited a maximum luminance of 1840 cd/m² and a turn‐on voltage of 5.4 V. In addition, a preliminary organic solar‐cell device with the ITO/PEDOT:PSS/(PTHBTzTF + C₆₀)/Ca/Al configuration (where C₆₀ is fullerene) was also fabricated. Under 100 mW/cm² of air mass 1.5 white‐light illumination, the device produced an open‐circuit voltage of 0.76 V and a short‐circuit current of 1.70 mA/cm². The fill factor of the device was 0.40, and the power conversion efficiency was 0.52%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1845–1857, 2005     

Effect of acidification treatment and morphological stability of sulfonated poly(arylene ether sulfone) copolymer proton‐exchange membranes for fuel‐cell use above 100 °C

Directly copolymerized wholly aromatic sulfonated poly(arylene ether sulfone) copolymers derived from 4,4′‐biphenol, 4,4′‐dichlorodiphenyl sulfone, 3,3′‐disulfonated, and 4,4′‐dichlorodiphenyl sulfone (BPSH) were evaluated as proton‐exchange membranes for elevated temperature operation (100–140 °C). Acidification of the copolymer from the sulfonated form after the nucleophilic step (condensation) copolymerization involved either immersing the solvent‐cast membrane in sulfuric acid at 30 °C for 24 h and washing with water at 30 °C for 24 h (method 1) or immersion in sulfuric acid at 100 °C for 2 h followed by similar water treatment at 100 °C for 2 h (method 2). The fully hydrated BPSH membranes treated by method 2 exhibited higher proton conductivity, greater water absorption, and less temperature dependence on proton conductivity as compared with the membranes acidified at 30 °C. In contrast, the conductivity and water absorption of a control perfluorosulfonic acid copolymer (Nafion 1135) were invariant with treatment temperature; however, the conductivity of the Nafion membranes at elevated temperature was strongly dependent on heating rate or temperature. Tapping‐mode atomic force microscope results demonstrated that all of the membranes exposed to high‐temperature conditions underwent an irreversible change of the ionic domain microstructure, the extent of which depended on the concentration of sulfonic acid sites in the BPSH system. The effect of aging membranes based on BPSH and Nafion at elevated temperature on proton conductivity is also discussed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2816–2828, 2003     

Determination of molecular weights and Mark–Houwink constants for soluble electronically conducting polymers

Intrinsic viscosities and gel permeation chromatography data were used to evaluate the Mark–Houwink constants of the soluble electronically conducting polymer, poly(3-hexylthiophene) (P3HT):K and a are 2.28 × 10^-3 cm³/g and 0.96, respectively, in tetrahydrofuran (THF) at 25°C. Mark–Houwink constants were used to calibrate gel permeation chromatography (GPC) columns for P3HT. Number-average molecular weights of P3HT determined with modified calibration curves agreed well with those determined by an absolute method, embulliometry. Molecular weights estimated using unmodified polystyrene calibration procedures were significantly larger than true values.     

Electrically conducting polymer colloids and composites

The preparation, characterization and properties of aqueous dispersions of electrically conducting polymer particles are described. Three types of such particles have been prepared: polyacetylene, polypyrrole and polyaniline. Particles in the size range 50–500 nm (diameter) and with conductivities generally ? 1–10 S cm may be made. Composites of such particles, dispersed in a matrix polymer which is non-conducting, are also described.     

Proton transportation in an organic–inorganic hybrid polymer electrolyte based on a polysiloxane/poly(allylamine) network

A new class of proton‐conducting polymer was developed via the sol–gel process from amino‐containing organic–inorganic hybrids by the treatment of poly(allylamine) with 3‐glycidoxypropyltrimethoxysilane doped with ortho‐phosphoric acid. The polymer matrix contains many hydrophilic sites and consists of a double‐crosslinked framework of polysiloxane and amine/epoxide. Differential scanning calorimetry results suggest that hydrogen bonding or electrostatic forces are present between H₃PO₄ and the amine nitrogen, resulting in an increase in the glass‐transition temperature of the poly(allylamine) chain with an increasing P/N ratio. The ³¹P magic‐angle spinning NMR spectra indicate that three types of phosphate species are involved in the proton conduction, and the motional freedom of H₃PO₄ is increased with increasing P/N ratios. The conductivity above 80 °C does not drop off but increases instead. Under a dry atmosphere, a high conductivity of 10^?3 S/cm at temperatures up to 130 °C has been achieved. The maximum activation energy obtained at P/N = 0.5 suggests that a transition of proton‐conducting behavior exits between Grotthus‐ and vehicle‐type mechanisms. The dependence of conductivity on relative humidity (RH) above 50% is smaller for H₃PO₄‐doped membranes compared with H₃PO₄‐free ones. These hybrid polymers have characteristics of low water content (23 wt %) and high conductivity (10^?2 S/cm at 95% RH), making them promising candidates as electrolytes for fuel cells. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3359–3367, 2005     

Effects of static electric field on the fracture behavior of piezoelectric ceramics

The paper gives an overview on experimental observations of the failure behavior of electrically insulating and conducting cracks in piezoelectric ceramics. The experiments include the indentation fracture test, the bending test on smooth samples, and the fracture test on pre-notched (or pre-cracked) compact tension samples. For electrically insulating cracks, the experimental results show a complicated fracture behavior under electrical and mechanical loading. Fracture data are much scattered when a static electric field is applied. A statistically based fracture criterion is required. For electrically conducting cracks, the experimental results demonstrate that static electric fields can fracture poled and depoled lead zirconate titanate ceramics and that the concepts of fracture mechanics can be used to measure the electrical fracture toughness. Furthermore, the electrical fracture toughness is much higher than the mechanical fracture toughness. The highly electrical fracture toughness arises from the greater energy dissipation around the conductive crack tip under purely electric loading, which is impossible under mechanical loading in the brittle ceramics. The project supported by an RGC grant from the Research Grant Council of the Hong Kong Special Administrative Region, China     

Unconventional Magnetic and Resistive Hysteresis in an Iodine‐Bonded Molecular Conductor

Simultaneous manipulation of both spin and charge is a crucial issue in magnetic conductors. We report on a strong correlation between magnetism and conductivity in the iodine‐bonded molecular conductor (DIETSe)₂FeBr₂Cl₂ [DIETSe=diiodo(ethylenedithio)tetraselenafulvalene], which is the first molecular conductor showing a large hysteresis in both magnetic moment and magnetoresistance associated with a spin‐flop transition. Utilizing a mixed‐anion approach and iodine bonding interactions, we tailored a molecular conductor with random exchange interactions exhibiting unforeseen physical properties.