Effect of molecular orientation distribution and crystallinity on the measurement of the crystal lattice modulus of nylon 6 by x-ray diffraction

The crystal lattice modulus of nylon 6 (-type) was measured by x-ray diffraction using nylon 6 films drawn up to five times. The measured crystal lattice modulus was 173–175 GPa for all specimens whose crystallinity and the Young's modulus were beyond 46% and 3.75 GPa, respectively. These results indicate that a state of homogenous stress can be achieved. In contrast, the values were scattered for the speciments whose crystallinity and Young's modulus are less than the above values. To study the origin, a numerical calculation of the crystal lattice modulus, as measured by x-ray diffraction, was carried out by considering effects on the orientation factors of molecular chains and crystallinity. In this calculation, a previously introduced model was employed, in which oriented crystalline layers are surrounded by oriented amorphous phases so that the strains of the two phases at the boundary are identical. The theoretical results calculated by the introduced model indicated that the crystal lattice modulus by x-ray diffraction is almost equal to the intrinsic crystal modulus if the morphology of the test specimen can be represented as a series model. In contrast, if a parallel model is more appropriate, the difference between the measured modulus and the intrinsic value can be pronounced. Such morphological dependence was found to be less pronounced with increasing high degree of molecular orientation and crystallinity.     

低温低内应力化学镀镍工艺的研究

化学镀广泛应用于非金属的电镀、电铸前的施加导电层。化学镀沉积层质量与其在零件上的附着力有着密切的关系 ,重视对化学镀沉积层内应力的研究 ,开发一个低温、低内应力的化学镀镍工艺 ,对于化学镀沉积层的推广应用有着十分重要的意义。本文采用正交实验方法对低温、低内应力化学镀镍工艺进行了系统研究 ,开发出了一个低温、低内应力的化学镀镍工艺。在实验过程中发现沉积层内应力同其在零件上的结合力具有密切关系并对其进行了初步探讨。1　实验方法1 1　正交实验根据探索性实验结果分析 ,影响化学镀镍层内应力σ和沉积层速率ｒ的主要因…     

Determination of Total Reduced Thiol Levels in Plasma Using a Bromide Substituted Quinone

The exploitation of 2‐bromo‐1,4‐naphthoquinone (NQBr) as a selective redox label for the determination of reduced thiol functionalities (RSH) has been investigated. The system is selective for RSH functionality, giving distinct voltammetric signals for glutathione and cysteine but can also be adapted for broad spectrum thiol detection. Ion chromatographic protocols based on conductimetric detection enable total RSH analysis (protein and monomolecular moieties) within human plasma. Bromide released through the reaction can be easily quantified and integrated within normal IC measurements. The efficacy of the approach has been assessed and the response validated through comparison with the standard colorimetric technique.     

Shear flow experiments in an assembly of gel beads and modelling of bingham behavior

In this paper, we present a rheological study of a compact layer of highly swollen gel beads. The flow regimes of these systems are modelled by an elastic sinusoid moving in a Newtonian fluid. This model predicts a yield stress varying with the square root of the elastic modulus of the gel bead. The slope at the origin (at zero velocity) of the flow curve is expected to depend only on geometrical parameters and on the solvent viscosity. The experimental data are in qualitative agreement with the theoretical predictions.     

The relationship between the linear (oscillatory) and nonlinear (steady-state) flow properties of a series of polymer and colloidal systems

The Cox-Merz empirical relationship between the linear (oscillatory) and nonlinear (steady-state) viscosities has been shown to be valid for many polymeric systems. Here, we present an equivalent expression to relate the linear (G) and nonlinear (N ₁) elastic properties of viscoelastic systems. Like the Cox-Merz relationship, it uses a combination of elastic and viscous parameters. The modified form of the storage modulus is then equivalent to the Cox-Merz complex viscosity. It can be used to correlate with (half) the normal force at numerically equal circular frequency and shear rate, respectively.This new expression and the Cox-Merz rule are tested for a range of polymeric and colloidal systems. It is found that both expression work for the polymeric systems considered, but fail for the colloidal systems. In the latter, the steady state values of viscosity and elasticity are consistently low, and replacing them by the complex viscosity and our new elastic expression only makes matters worse.For polymer systems, we suggest this is a general but not universal observation, since we are aware of exceptions to the rule that polymeric systems obey the Cox-Merz rule for viscosity and our rule for elasticity. For colloidal systems we find that neither rule is obeyed for any of our systems.     

Quantitative evaluation of stress distribution in bulk polymer samples through the comparison of mechanical behaviors between giant single‐crystal and semicrystalline samples of poly(trans‐1,4‐diethyl muconate)

The Raman shift and crystallite modulus were measured under the application of tensile force for a giant single crystal and a series of uniaxially oriented semicrystalline samples of poly(trans‐1,4‐diethyl muconate) (polyEMU). The apparent Raman shift factor α^app or a vibrational frequency shift per 1 GPa tensile stress was higher for the semicrystalline samples with lower crystallinity or lower bulk modulus. The apparent crystallite modulus E or Young's modulus along the chain axis in the crystalline region was not constant but varied remarkably between the giant single crystal and semicrystalline samples. A systematic change in α^app and E among the polyEMU samples with different preparation history could be interpreted quantitatively on the basis of a mechanical series parallel model consisting of crystalline and amorphous phases. The origin of different E and α^app was speculated to be a stress concentration on the taut‐tie chain contained as a parallel crystalline component in the mechanical model. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 444–453, 2003     

Investigation of Cd(II), Pb(II) and Cu(I) complexation by glutathione and its component amino acids by ESI-MS and size exclusion chromatography coupled to ICP-MS and ESI-MS

The elucidation of structures of glutathione (GSH) complexes play an important role in the fundamental understanding of biochemical pathways of metal ion deactivation in plants. This article attempts to feature key studies for stoichiometry of metal complexes with glutathione and its constituent amino acids to obtain a better understanding of the different metal affinities of the complexation sites of glutathione. The SEC-ICP-MS experiments have indicated that oxidation process of glutathione was accelerated by metal ion presence in following order Cu⁺, Pb²⁺ and Cd²⁺. The redox activity of metal ions was confirmed by ESI-MS experiments, which allowed to observe formation of glutathione disulphide (GSSG) in time. The stoichiometry of Cd²⁺, Cu⁺ and Pb²⁺ complexes with GSH was defined by observing the isotope pattern of investigated metals and hydrogen loss or transfer during binding. The complexes with metal bound to sulphur of 1:1 and 1:2 stoichiometry were found in case of cadmium and lead. The number of hydrogen atoms lost during metal binding and the SEC-ESI-MS results allowed to elucidate that copper is bound by GSSG in ratio 1:1 and 1:2. Additionally, size exclusion chromatography coupled to electrospray MS allowed to differentiate more stable complexes from weak ones that could be created in the gas phase.     

The effects of alternative stress on the cell membrane deformability of chrysanthemum callus cells

The effects of alternative stress, which was generated through a strong sound field apparatus set up in our lab, on cultured chrysanthemum callus cells were studied. Meanwhile we measured the deformability of chrysanthemum cell membranes and studied the influence of the cytoskeleton after the treatment of colchicine using micropipette aspiration technique. Based on our experimental results, we found that the deformability of cell membrane decreased in stress condition. However, the effect disappeared after the treatment of cytochalasin. Therefore, we thought that the reason on the deformability of cells decreasing was the microfilament rearranging and consequently the cells becoming more rigid under the alternative stress.     

Thermodynamic issues associated with combined cyclic voltammetry and wafer curvature measurements in electrolytes

A thermodynamic framework has been provided for the interpretation of combined cyclic voltammetry and surface stress measurements, the latter being obtained from wafer curvature or beam deflection measurements of a solid electrode as a function of applied potential (so-called voltstressograms). Firstly, the derivation of electrocapillarity equations for solid electrodes has been critically reviewed by starting from the Gibbs adsorption equation appropriate for solid–electrolyte interfaces. This allowed us to demonstrate the critical importance of elastic surface strain in the thermodynamic boundary conditions of the partial derivatives intervening in the interpretation of voltstressograms. From these considerations, it was shown for the first time that the electrocapillarity equations for solid electrodes are not appropriate for describing the variation of surface stress with potential obtained from wafer curvature measurements, because such measurements are intrinsically incompatible with the constant strain condition implied in the electrocapillarity equations. An alternative explanation is provided for the experimentally observed proportionality between the current density, measured in cyclic voltammograms, and the first derivative of surface stress with respect to potential, obtained from voltstressograms.     

Use of blowing catalysts for integral skin polyurethane applications in a controlled molecular architectural environment: Synthesis and impact on ultimate physical properties

Polyurethane elastomers of a controlled molecular architecture were synthesized using a two‐step polymerization technique. The building blocks of the elastomeric materials included urea–urethane prepolymers end‐capped with diisocyanate groups and had an exact number of urea groups at both ends. Two‐dimensional bifurcated hydrogen‐bonding networks incorporating the urea groups were, with differential scanning calorimetric and dynamic mechanical thermal analyzer techniques, responsible for the increase in the glass‐transition temperature (T_g) of the hard block and sharp interface morphology between the pure “hard” domains and pure “soft” domains. The higher extent of the phase separation between the two phases contributed to higher elastic moduli for the hard blocks and higher tensile strength for the elastomeric samples. Higher elongation values were attributed to the liberation of the elastomeric chain ends that otherwise would have been constrained in the interface region. The higher T_g values of the hard blocks corresponded to an increase in the hardness values and a decrease in the tear‐strength values. The increase in the amount of urea groups within the hard segments, as a result of the increased amount of water and blowing catalyst, resulted in elastomeric foams with higher open‐cell content. This resulted in lower resilience values as measured using the pendulum rebound test and was attributed to the ability of the open cells to absorb and dissipate energy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2526–2536, 2002