Ag/ZnO基陶瓷复合材料的微结构和电学行为

通过制备银/氧化锌基陶瓷复合材料,研究了复合材料的微观结构和基本电学行为。通过XRD、SEM的分析和基本物理量(密度和电阻率)、I-V特性的测量结果发现,银与氧化锌陶瓷之间并没有发生化学反应,致密度也不高。但是,二者的复合使原来在2000V/cm下不显现非欧姆特性的氧化锌陶瓷具有了非欧姆特性,非线性系数α达8.4,此时银的质量分数约为20%,银若过多(≥30%)或过少(≤10%)都不利于非欧姆特性的实现。     

SUP-阿基米德T模合成算子模糊关系方程的求解

论文根据阿基米德 T模的一些特性 ,给出求解 SUP-阿基米德 T模合成算子模糊关系方程的方法 ,以及求解最大解和全体极小的解方法 .     

低声阻抗复合压电陶瓷的研究及应用

本文研究了我们所配制夹心结构复合压电材料低声阻抗的特性。实验表明，夹心复合压电陶瓷材料的声阻抗，与所用陶瓷材料的种类，气孔率，孔径，样品厚度以及工艺制备过程有关。实验证明，研制特定阻抗的材料是可行的，最后，用研制的新材料成功地应用于混凝土、Ｃ／Ｃ复合材料等非金属材料的超声检测中。     

Polylactide compositions. II. Correlation between morphology and main properties of PLA/calcium sulfate composites

Starting from calcium sulfate (gypsum) as fermentation by‐product of lactic acid production process, high performance composites have been produced by melt‐blending polylactide (PLA, L/D isomer ratio of 96:4) and β‐anhydrite II (AII) filler, that is, calcium sulfate hemihydrate previously dehydrated at 500 °C. Characterized by attractive mechanical and thermal properties due to good filler dispersion throughout the polyester matrix, these composites are interesting for potential use as biodegradable rigid packaging. Physical characterization of selected composites filled with 20 and 40 wt % AII has been performed and compared to processed unfilled PLA with similar amorphous structure. State of dispersion of the filler particles and interphase characteristic features have been investigated using light microscopy (LM) and scanning electron microscopy (SEM). Addition of AII did not decrease PLA thermal stability as revealed by thermogravimetry analyses (TGA) and allowed reaching a slight increase of PLA crystallizability during melt crystallization and upon heating from the glassy, amorphous state (DSC). It was found by thermomechanical measurements (DMTA) that the AII filler increased pronouncedly storage modulus (E′) of the composites in comparison with PLA in a broad temperature range. The X‐ray investigations showed stable/unchanged crystallographic structure of AII during processing with molten PLA and in the composite system. The notable thermal and mechanical properties of PLA–AII composites are accounted for by the good filler dispersion throughout the polyester matrix confirmed by morphological studies, system stability, and favorable interactions between components. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2770–2780, 2007     

含分层损伤复合材料加筋层合板的分层扩展研究

建立了复合材料加筋结构的后屈曲和分层损伤扩展行为的数值模拟方法．基于Mindlin一阶剪切理论和von-Karman大挠度理论的层合板和层合梁单元，提出了含分层损伤复合材料加筋层合板分层扩展行为的有限元分析方法；利用虚裂纹闭合技术计算分层前缘的总能量释放率，并采用总能量释放率准则分层扩展判据，结合自适应网格移动技术，对在压缩载荷作用下的具有不同加筋形式，不同初始分层面积和形状的加筋板结构分层扩展行为进行了数值模拟研究，在分析中还考虑了加筋刚度、位置和分布，分层形状和大小、边界支撑强弱和分层前缘的接触效应对结构分层扩展行为的影响．本所提出的研究方法对工程界关于复合材料结构的设计具有重要意义．     

有机-无机复合质子交换膜的制备与界面特性

有机-无机复合质子交换膜的开发是燃料电池用质子交换膜的一个重要研究方向,本文综述了有机-无机复合质子交换膜的制备方法,分析了两相之间的界面特性,并对这种复合膜的研究前景进行了展望.     

京—汉—广架空光缆工程

本文介绍我国第一条国产长途光缆一级通信干线京—汉—广架空光缆工程系统的构成,并侧重介绍京—汉—广工程的光传输系统和传输设备。     

The effects of kinematic condensation on internally resonant forced vibrations of shallow horizontal cables

This study aims at comparing non-linear modal interactions in shallow horizontal cables with kinematically non-condensed vs. condensed modeling, under simultaneous primary external and internal resonances. Planar 1:1 or 2:1 internal resonance is considered. The governing partial-differential equations of motion of non-condensed model account for spatio-temporal modification of dynamic tension, and explicitly capture non-linear coupling of longitudinal/vertical displacements. On the contrary, in the condensed model, a single integro-differential equation is obtained by eliminating the longitudinal inertia according to a quasi-static cable stretching assumption, which entails spatially uniform dynamic tension. This model is largely considered in the literature. Based on a multi-modal discretization and a second-order multiple scales solution accounting for higher-order quadratic effects of a infinite number of modes, coupled/uncoupled dynamic responses and the associated stability are evaluated by means of frequency- and force-response diagrams. Direct numerical integrations confirm the occurrence of amplitude-steady or -modulated responses. Non-linear dynamic configurations and tensions are also examined. Depending on internal resonance condition, system elasto-geometric and control parameters, the condensed model may lead to significant quantitative and/or qualitative discrepancies, against the non-condensed model, in the evaluation of resonant dynamic responses, bifurcations and maximal/minimal stresses. Results of even shallow cables reveal meaningful drawbacks of the kinematic condensation and allow us to detect cases where the more accurate non-condensed model has to be used.