Preparation of Saccharide-Silica Composites by a Sol-Gel Method and the Application for Optical Resolution of Metal Chelate Compounds

A novel organic-inorganic composite was prepared by a sol-gel process using hydrolysis and condensation of tetraethoxysilane (TEOS) reacted with a saccharide. During the process, ethoxy groups of the TEOS were replaced with hydroxyl groups of the saccharide and, consequently, saccharide molecules were combined with silica through their hydroxyl groups. Samples obtained under different reaction conditions were used for optical resolution of a metal chelate compound. The resolution ability of the composites was affected by the amount of water added for hydrolysis and of the saccharide. In particular, the amount of water drastically influenced the optical resolution performance. Composites obtained at the lower H2O/TEOS ratio gave the metal chelate compound a higher optical rotation. Three types of composites with the same composition were prepared by kneading, impregnation and by the sol-gel method, and were compared. The sol-gel composite showed the best optical resolution ability. It was concluded that the optical resolution ability was closely related to dispersibility of saccharide in the silica matrix.     

反应性复合乳液的合成、表征及其交联反应

利用种子半连续乳液聚合方法合成了核层或壳层带有环氧基以及壳层带有羧基的3种不同核/壳结构的乳胶粒子,通过物理共混带环氧基和羧基的乳胶粒子,得到了两种反应性复合乳液.利用透射电镜和激光动态光散射对乳胶粒子进行了表征,其粒径分布较窄,粒径分布的多分散系数为0.062,平均粒径约76 nm,乳胶粒子具有明显的核/壳结构.通过胶膜的凝胶率和膨胀率的测定和红外光谱分析对反应性复合乳液中乳胶粒子的扩散及交联反应进行了研究,并探讨了不同核壳结构复合乳液对涂膜机械性能的影响.研究表明,当反应性复合乳液中的环氧基和羧基分别分布在乳胶粒子的核层和壳层时,有利于聚合物分子链的充分扩散和化学交联反应的进行,从而提高涂膜的物理化学性能,当甲基丙烯酸缩水甘油酯(GMA)含量为10 wt%时,涂膜的拉伸强度达20.3 MPa.     

微量元素锌在治疗Bell麻痹中的作用

为探讨急性早期应用补锌和综合疗法治疗Bell麻痹 ,将 1 5 8例Bell麻痹患者 ,随机分成两组 :(1 )补锌组 (补锌 +综合疗法 ) ;(2 )对照组 (单纯综合疗法 )。对其进行了观察对比治疗 ,同时检测了所有患者治疗前后自身对照发锌值 ,还对所有患者进行了定位诊断、面神经电反应测试、并对面肌功能进行评分。结果表明 ,对定位诊断其病变在D段、面肌功能评分在 1 1分以下、面神经无电反应患者 ,即使给予早期综合治疗 ,效果仍较差 ,而早期给予补锌加综合治疗效果优于对照组 ,其它段内患者治疗次数和治愈天数也均优于对照组。可见微量元素锌在发挥免疫应答、免疫调控中的重要作用     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

Inorganic Filler Enhanced Formation of Stable Inorganic-Rich Solid Electrolyte Interphase for High Performance Lithium Metal Batteries

Lithium metal (LM) is a promising anode material for next generation lithium ion based electrochemical energy storage devices. Critical issues of unstable solid electrolyte interphases (SEIs) and dendrite growth however still impede its practical applications. Herein, a composite gel polymer electrolyte (GPE), formed through in situ polymerization of pentaerythritol tetraacrylate with fumed silica fillers, is developed to achieve high performance lithium metal batteries (LMBs). As evidenced theoretically and experimentally, the presence of SiO₂ not only accelerates Li⁺ transport but also regulates Li⁺ solvation sheath structures, thus facilitating fast kinetics and formation of stable LiF-rich interphase and achieving uniform Li depositions to suppress Li dendrite growth. The composite GPE-based Li||Cu half-cells and Li||Li symmetrical cells display high Coulombic efficiency (CE) of 90.3% after 450 cycles and maintain stability over 960 h at 3 mA cm⁻² and 3 mAh cm⁻², respectively. In addition, Li||LiFePO₄ full-cells with a LM anode of limited Li supply of 4 mAh cm⁻² achieve capacity retention of 68.5% after 700 cycles at 0.5 C (1 C = 170 mA g⁻¹). Especially, when further applied in anode-free LMBs, the carbon cloth||LiFePO₄ full-cell exhibits excellent cycling stability with an average CE of 99.94% and capacity retention of 90.3% at the 160th cycle at 0.5 C.     

Ultra-Thin Single-Particle-Layer Sodium Beta-Alumina-Based Composite Polymer Electrolyte Membrane for Sodium-Metal Batteries

Inorganic/organic composite polymer electrolytes (CPEs) with good flexibility and electrode contact have been pursued for solid−state sodium-metal batteries. However, the application of CPEs for high energy density solid−state sodium-metal batteries is still limited by the low Na⁺ conductivity, large thickness, and low ion transference number. Herein, an ultra-thin single-particle-layer (UTSPL) composite polymer electrolyte membrane with a thickness of ≈20 µm straddled by a sodium beta−alumina ceramic electrolyte (SBACE) is presented. A ceramic Na⁺-ion electrolyte that bridges or percolates across an ultra-thin and flexible polymer membrane provides: 1) the strength and flexibility from the polymer membrane, 2) excellent electrolyte/electrode interfacial contact, and 3) a percolation path for Na⁺-ion transfer. Owing to this novel design, the obtained UTSPL-35SBACE membrane exhibits a high Na⁺-ion conductivity of 0.19 mS cm⁻¹ and a transference number of 0.91 at room temperature, contributing to long−term cycling stability of symmetric sodium cells with a small overpotential. The assembled quasi-solid-state cell with the as−prepared UTSPL-35SBACE membrane displays superior cycling performance with a discharge capacity of 105 mAh g⁻¹ at 0.5 °C rate after 100 cycles and excellent rate performance (82 mAh g⁻¹ at 5 °C rate) at room temperature with the potassium manganese hexacyanoferrate (KMHCF)@CNTs/CNFs cathode, where KMHCF refers to potassium manganese hexacyanoferrate.     

一种Ku波段综合馈电多功能板的研制

基于多层微波数字复合基板层叠互联技术,研制的Ku波段综合馈电多功能板集成了射频收发网络、电源分配网络、阵面波控及波控分配网络,主要负责16个片式T/R组件的功率分配与合成,同时为各T/R组件提供电源及控制信号。文中对多功能板的架构设计、工作原理进行了说明,重点介绍了各微波垂直互联电路和射频收发网络的设计,最后加工并测试了验证样件,测试结果良好。收发网络总口驻波＜1.9,分口驻波＜1.3,插损＜16 dB,相邻端口的隔离度＞20 dB,且幅度一致性≤0.602 dB,相位一致性≤6.429°。工程应用可行性和实用性得到了验证。     

(CoFe)Se2@NC超级电容器电极材料的制备及其电化学性能

金属-有机框架(MOF)衍生的过渡金属硒化物和多孔碳纳米复合材料具有巨大的储能优势,是应用于电化学储能的优良电极材料。采用共沉淀法制备CoFe类普鲁士蓝(CoFe-PBA)纳米立方,并通过静电组装在CoFe-PBA上包覆聚吡咯(PPy)得到CoFe-PBA@PPy;通过在400℃氮气中退火并硒化成功制备了氮掺杂的碳(NC)包覆(CoFe)Se₂的(CoFe)Se₂@NC纳米复合材料,并对其结构和形貌进行了表征。以(CoFe)Se₂@NC为电极制备了超级电容器,测试了其电化学性能,结果表明,在电流密度1 A/g时超级电容器的比电容达到1047.9 F/g,在电流密度5 A/g下1000次循环后具有良好的循环稳定性和96.55%的比电容保持率。由于其性能优越、无毒、成本低和易于制备,未来(CoFe)Se₂@NC纳米复合材料在超级电容器中具有非常大的应用潜力。     

Efficiency of composite vs. conically shaped chromatographic columns

The theory of composite chromatographic columns has been re-examined and general equations relating their efficiency to those of individual columns were derived. The derivations were based on elementary principles without reference to the principle of variance additivity. Derived also, were general equations for the efficiency of columns with continuously varying diameters, HETP and other properties from which formulae for special cases of practical interest were deduced. An example comparing the efficiencies of two columns, one conical and the other composite was given. The calculations show clearly that the conical column is superior in efficiency for the same total length and total retention volume.