遗传算法在GSM移动通信网络频率规划中的应用

应用遗传算法设计和开发了针对爱立信GSM900系统的频率规划软件。在设计中，采用了交叉点存储、变异回退以及分割分步降维的方法，从而提高遗传算法的执行速度。     

浅谈计算软件的开发

软件开发重要的是 :确定编程语言 ,代码设计 ,程序设计 ,软件试验 ,人员培训等步骤     

Quality of Service in VoIP Communication

The focus of this paper lies in the practical aspects of voice over IP communication. VoIP configurations in the H.323 standard will be presented briefly. Following that, the fundamental protocol procedure of H.323 communication will be briefly explained. A further part of the paper will address the subject QoS (quality of service), and present the common measurement methods used in QoS. Results gained from experiments conducted in a VoIP environment will then follow. The investigations concentrate primarily on the load behavior of voice packets in relation to important parameters of this service. The results obtained are presented and evaluated in diagrams. The paper concludes with a summary.     

基于TMS320VC5410的最小系统设计

TMS320VC5410是TI公司生产的一款定点数字信号处理(DSP)芯片。基于DSP的最小系统是以其简洁的硬件结构来实现DSP的一般功能,广泛应用于工业生产、教学、科研、电子设计等领域。主要介绍了基于TMS320VC5410的最小系统硬件电路设计方案,阐述了重要电路部分的抗干扰设计和软件调试过程中应注意的若干问题。最后提出了简单易行的软件调试方法以及部分程序代码。     

An Effective Software Pipelining Algorithm for Clustered Embedded VLIW Processors

This paper proposes a software pipelining framework, CALiBeR (ClusterAware Load Balancing Retiming Algorithm), suitable for compilers targetingclustered embedded VLIW processors. CALiBeR can be used by embedded systemdesigners to explore different code optimization alternatives, that is, high-qualitycustomized retiming solutions for desired throughput and program memory sizerequirements, while minimizing register pressure. An extensive set of experimentalresults is presented, demonstrating that our algorithm compares favorablywith one of the best state-of-the-art algorithms, achieving up to 50% improvementin performance and up to 47% improvement in register requirements. In orderto empirically assess the effectiveness of clustering for high ILP applications,additional experiments are presented contrasting the performance achievedby software pipelined kernels executing on clustered and on centralized machines.     

托卡马克工程试验混合堆等离子体性能的等值线图分析

本文简要叙述托卡马克工程试验混合堆等离子体概念设计的物理基础,对等离子体性能进行了等值线图(Plasma Operation Contour)分析。根据工程试验混合堆的要求,得出一组等离子体参数。     

军事科研项目中软件项目管理方法研究

列举分析了目前软件开发中存在的问题，提出了在军事科研项目中，对软件项目实施管理的方法，应用先进的软件项目管理理论和方法，有效的提高软件开发效率，确保软件质量。     

Calibrating software reliability models when the test environment does not match the user environment

Software failures have become the major factor that brings the system down or causes a degradation in the quality of service. For many applications, estimating the software failure rate from a user's perspective helps the development team evaluate the reliability of the software and determine the release time properly. Traditionally, software reliability growth models are applied to system test data with the hope of estimating the software failure rate in the field. Given the aggressive nature by which the software is exercised during system test, as well as unavoidable differences between the test environment and the field environment, the resulting estimate of the failure rate will not typically reflect the user‐perceived failure rate in the field. The goal of this work is to quantify the mismatch between the system test environment and the field environment. A calibration factor is proposed to map the failure rate estimated from the system test data to the failure rate that will be observed in the field. Non‐homogeneous Poisson process models are utilized to estimate the software failure rate in both the system test phase and the field. For projects that have only system test data, use of the calibration factor provides an estimate of the field failure rate that would otherwise be unavailable. For projects that have both system test data and previous field data, the calibration factor can be explicitly evaluated and used to estimate the field failure rate of future releases as their system test data becomes available. Copyright © 2002 John Wiley & Sons, Ltd.     

Comparison of two models for managing reliability growth during product design

Relying on reliability growth testing to improve system designis neither usually effective nor efficient. Instead it is importantto design in reliability. This requires models to estimate reliabilitygrowth in the design that can be used to assess whether goalreliability will be achieved within the target timescale forthe design process. Many models have been developed for analysisof reliability growth on test, but there has been much lessattention given to reliability growth in design. This paperdescribes and compares two models: one motivated by the practicalengineering process; the other by extending the reasoning ofstatistical reliability growth modelling. Both models are referencedin the recently revised edition of international standard IEC61164. However, there has been no reported evaluation of theirproperties. Therefore, this paper explores the commonalitiesand differences between these models through an assessment oftheir logic and their application to an industrial example.Recommendations are given for the use of reliability growthmodels to aid management of the design process and to informproduct development.     

基于自适应预测滤波理论的模数转换器设计方法

基于自适应差分量化理论，提出了在不增加转换位数的情况下提高模数转换器(ADC)动态范围的一种设计方法。该方法通过量化输入与预测的差值来获得预测增益，从而扩大ADC的动态范围；通过差分量化值与预测值相加得到输出信号，并将该分别采用LMS和RLS算法进行处理．得到输入信号的预测值．计算机模拟结果证实，上述两种算法均能使模数转换器的动态范围提高约25dB．比较而言，RLS算法收敛速度更快，收敛性更好，但计算量较大．