Design and analysis of noise margin,write ability and read stability of organic and hybrid 6-T SRAM cell

This paper analyzes SRAM cell designs based on organic and inorganic thin film transistors (TFTs). The performance in terms of static noise margin (SNM), read stability and write ability for all-p organic (Pentacene–Pentacene), organic complementary (Pentacene–C₆₀) and hybrid complementary (Pentacene–ZnO) configurations of SRAM cell is evaluated using benchmarked industry standard Atlas 2-D numerical device simulator. Moreover, the cell behaviour is analyzed at different cell and pull-up ratios. The electrical characteristics and performance parameters of individual TFT used in SRAM cell is verified with reported experimental results. Furthermore, the analytical result for SNM of all-p organic SRAM cell is validated with respect to the simulated result. Besides this, the cell and pull-up ratios of the hybrid and organic SRAM cells are optimized for achieving best performance of read and write operations and thereafter, the results are verified analytically also. The SNM of hybrid cell is almost two times higher than the all-p SRAM, whereas this improvement is just 18% in comparison to the organic memory cell. On the other hand, the organic complementary SRAM cell shows an improvement of 26% and 22% for the read stability in comparison to the all-p organic and hybrid SRAM cells, respectively. Contrastingly, this organic cell demonstrates a reduction of 16% in the SNM and an increment of 76% in write access time in comparison to the hybrid cell. To achieve an overall improved performance, the organic complementary SRAM cell is designed such that the access transistors are pentacene based p-type instead of often used n-type transistor. Favorably, this organic SRAM design shows reasonably lower write access time in comparison to the cell with n-type access OTFTs. Moreover, this cell shows adequate SNM and read stability that too at substantially lower width of p-type access OTFTs.     

Reducing PAPR of SC‐FDMA Signals through Simple Amplitude Predistortion

A novel peak‐to‐average power ratio (PAPR) reduction method is proposed for single‐carrier frequency‐division multiple access (SC‐FDMA) signals. The proposed method deliberately distorts the amplitude values of a few of the complex modulated symbols that cause peaks beyond a predetermined threshold in the samples of the output signal. The method then marks the location indices of the distorted symbols by using a pilot block at the transmitter without transmitting side information. At the receiver, the method is then able to recover the distorted amplitude values through the marked location indices. Computer simulation results show that when compared to conventional SC‐FDMA signals, the proposed scheme can effectively reduce the PAPR of SC‐FDMA signals with asymptotically consistent bit error rate (BER) performance.     

基于CSRR的带通滤波器小型化设计

介绍了一种新型的互补开环谐振器(Complementary Split Ring Resonators,CSRR),用此新型谐振器和1/4波长传输线变换器制作了波导带通滤波器.在此基础上为了使滤波器更小型化,设计了挡板结构,改进了滤波器的1/4波长传输线变换器.通过对两种结构的仿真比较得出,新型结构的滤波器在满足设计需...     

Inter‐annual variability,risk and confidence intervals associated with propagation statistics. Part II: parameterization and applications

This set of two companion papers aims at providing a model for the inter‐annual variability of earth‐space propagation statistics and for the inherent risk and CIs. In part I, it was proposed to model the yearly variance σ² of empirical complementary CDFs so that where is the variance of estimation, the inter‐annual climatic variance and p the long‐term probability. Particularly, an analytical formulation of was derived and parameterized from synthetic rain attenuation data. Considering the statistical framework developed in part I, this part II is specifically devoted to the parameterization of the variance of estimation from experimental data of rain attenuation and rainfall rate. Then, a methodology to model and parameterize worldwide the inter‐annual climatic variance is presented. The model of yearly variance of the empirical complementary CDFs is finally compared against yearly experimental variances derived from data collected worldwide. The knowledge of this variability is very useful for system design as it allows the risk on a required availability and associated with a given propagation margin to be quantified. Copyright © 2013 John Wiley & Sons, Ltd.     

无人机高度信息融合技术研究

无人机在丘陵地带做低空飞行任务时,需要准确的对地高度信息才能保障无人机的安全飞行。本文研究了基于互补滤波网络的高度信息融合技术,针对气压高和无线电高的误差特性,分析了互补滤波的理论依据,设计了互补滤波网络的时间常数,给出了离散域内互补滤波器的算法。最后针对某无人机进行了非线性仿真和试飞验证,结果表明设计的滤波器满足无人机在丘陵地带的低空飞行要求。     

Bent互补函数族的性质和构造方法

本文提出了Ｂｅｎｔ互补函数族的概念，研究了Ｂｅｎｔ互补函数族的性质和构造方法。     

Further explorations into ternary complementary pairs

In [R. Craigen, C. Koukouvinos, A theory of ternary complementary pairs, J. Combin. Theory Ser. A 96 (2001) 358-375], we proposed a systematic approach to the theory of ternary complementary pairs (TCPs) and showed how all pairs known then could be constructed using a single elementary product, the natural equivalence relations, and a handful of pairs which we called primitive. We also introduced more new primitive pairs than could be inferred previously, concluding with some conjectures reflecting the patterns that were beginning to arise in light of the new approach.In this paper we take what appears to be the natural next step, by investigating these patterns among those lengths and weights that are within easy computational distance from the last length considered therein, length 14. We give complete results up to length 21, and partial results up to length 28. (Ironically, although we proceed analytically by weight first then length, for computational reasons we are bound, in this empirical investigation, to proceed according to length first.)Thus we provide support for the previous conjectures, and shed enough new light to speculate further as to the likely ultimate shape of the theory. Since short term work on TCPs will require massive acquisition of data about small pairs, we also discuss affixes—a computational strategy that arose out of the investigations culminating in this article.     

CMDC:an iterative algorithm for complementary multi-view document clustering

In response to the problems traditional multi-view document clustering methods separate the multi-view document representation from the clustering process and ignore the complementary characteristics of multi-view document clustering,an iterative algorithm for complementary multi-view document clustering——CMDC was proposed,in which the multi-view document clustering process and the multi-view feature adjustment were conducted in a mutually unified manner.In CMDC algorithm,complementary text documents were selected from the clustering results to aid adjusting the contribution of view features via learning a local measurement metric of each document view.The complementary text document of the results among the dimensionality clusters was selected by CMDC,and used to promote the feature tuning of the clusters.The partition consistency of the multi-dimensional document clustering was solved by the measure consistency of the dimensions.Experimental results show that CMDC effectively improves multi-dimensional clustering performance.     

Linear complementarity and discounted switching controller stochastic games

The class of discounted switching controller stochastic games can be solved in one step by a linear complementarity program (LCP). Following the proof of this technical result is a discussion of a special formulation and initialization of a standard LCP pivoting algorithm which has, in numerical experiments, always terminated in a complementary solution. That the LCP algorithm as formulated always finds a complementary solution has not yet been proven, but these theoretical and experimental results have the potential to provide an alternative proof of the ordered field property for these games. Numerical experimentation with the reformulated LCP is reviewed.     

Gas composition dependence of silicon nitride used as gallium diffusion barrier during GaAs molecular beam epitaxy growth on Si complementary metal oxide semiconductor

We have measured the effect of deposition parameters upon the utility of plasma enhanced chemical vapor depositon silicon nitride as a gallium diffusions barrier during molecular beam epitaxy growth of gallium arsenide on silicon submicron complementary metal oxide semiconductor electronics. It was found that the conditions under which the silicon nitride is deposited severely impact the ability of these films to be used as a diffusion barrier, with the most critical dependence upon the silane to nitrogen gas ratio.