混合模式硅胶基质毛细管电色谱整体柱的制备及其电色谱性能研究

采用温和条件下的溶胶-凝胶技术，成功制备了阴离子交换-反相混合模式硅胶基质毛细管电色谱整体柱。通过调整反应液中不同前体的比例，优化了整体柱的制备条件。通过扫瞄电镜，对柱床进行了表征和分析。实验发现，所制备的整体柱电渗流的方向和大小可随流动相pH值的改变而改变，在酸性和中性条件下，具有从阴极流向阳极的电渗流；当流动相pH值升至约7．5时，电渗流方向发生了反转（由阳极流向阴极）。在优化的实验条件下，用所制备的整体柱对所考察的酸性（中性）化合物实现了快速分离，并获得了高达160，000N／m的柱效。     

Stimultaneous quantitative analysis using dual capillary columns of different polarities

Complex organic mixtures, such as coal liquefaction and oil shale products and by-products, are comprised of hundreds or thousands of individual components. State-of-the-art high resolution gas chromatography does not always provide sufficient resolution to allow accurate quantitation or identification of many compounds of interest. The concept of dual capillary column chromatography combines the different resolving characteristics of two capillary columns coated with different stationary phases into a single chromatographic run. In this approach, both columns are connected to the same injection port. Analysis of complex mixtures in this fashion can confirm the identification and quantitation of components on two columns of different polarity with little increased analysis time, can provide a means of obtaining quantitative data for individual components which are known to coelute on any one column, and can alert one to unknown coelution problems that would be undetected by gas chromatographic analysis on a single capillary column. Simultaneous dual column analysis was applied to three samples, the neutral polycyclic aromatic hydrocarbon (PAH) fraction of a Solvent Refined Coal-II (SRC-II) heavy distillate, the nitrogen-containing polycyclic aromatic compound (N-PAC) fraction of an SRC-II heavy distillate, and the basic fraction from a shale oil process water. Fused silica capillary columns coated with SE-54 and Durawax 3 were used for the analyses of the heavy distillate, while SE-54 an Carbowax 20M capillary columns were used for the analysis of the process water.     

Comparison of provitamin A determination by normal-phase gravity-flow column chromatography and reversed-phase high performance liquid chromatography

Summary The provitamin A content of some food samples was determined by methods involving MgO: Hyflosupercel gravityflow column chromatography (GFCC) and reversed phase high performance liquid chromatography (HPLC), the quantitation being done by external standardization (HPLC-ES) or internal standardization (HPLC-IS) with Sudan. The results obtained with - and -carotene in carrots, -carotene and -cryptoxanthin in papaya and -carotene in tomato and kale agreed well, showing that any of the these techniques can be used, provided the analysis is done under optimum conditions. Good separation of the different provitamins using GFCC depends on the analyst's skill and visual acuity. HPLC-ES required a constant supply of provitamin standards, thus the varying purity of commercially available standards and the high instability of these compounds could pose grave problems. Due to the stability of Sudan, HPLC-IS appeared to be the method of choice although passage of the extract through a MgO: Hyflosupercel minicolumn was required prior to injection to separate chlorophylls, dihydroxy- and polyoxycarotenoids which would otherwise elute with Sudan. Nonconformity of the Sudan structure to those of the provitamins did not effect the quantitative results. The chromatographic separation, identity and quantification of the provitamins could be more easily established by using HPLC-IS, complemented with GFCC.     

Retention,enantioselectivity and enantiomeric elution order of propranolol and its ester derivatives on an alpha1-acid glycoprotein-bonded column

Summary The retention, enantionselectivity and enantiomeric elution order of racemic propranolol (PP) and its ester derivatives (O-acetyl,-propionyl,-butyrul and-valeryl PP) on an ₁-acid glycoprotein (AGP)-bonded column have been investigated by changing eluent composition (eluent pH, buffer concentration, type and content of organic modifier). The retention of these cationic solutes, PP and its ester derivatives, was influenced by eluent pH, ionic strength and organic modifier content. The enantioselectivity was dependent on eluent pH and type of organic modifier. Reversal of the enantiomeric elution order of ester derivatives of PP (O-propionyl-butyryl) and-valeryl PP) occurred around eluent pH 6–7. These results suggst that chiral recognition or binding properties may be altered by the change in eluent composition, espeically eluent pH and type of organic modifier.     

First synthesis of enantio-uracil dinucleotide, comparison of physicochemical properties of their enantiomers, and separation by chiral column chromatography

Enantio-uracil dinucleotide 5, which consists of two l-uridylic acids and one pyrophosphate, was synthesized for the first time in our laboratory. Benzolyated l-uridine was prepared by a stereoselective glycosylation of silylated uracil with l-1-O-acetyl-2,3,5-tri-O-benzoylribose (l-ABR 7). After deprotection, l-uridine 9 was converted to P¹,P⁴-di(l-uridine 5′-) tetraphosphate tetrasodium salt (l-UP₄U 5) by treatment of l-UMP morpholidate 10c with triethylammonium pyrophosphate (TEA-PPi 11b). Spectral data of synthesized l-UP₄U 5 are given in the references. All spectral data were identical with those of UP₄U 3 except the specific rotation, which showed a positive value compared to UP₄U 3 having a negative value. Furthermore, the separation by chiral column chromatography was investigated.     

Simultaneous determination of theophylline,tolbutamide, mephenytoin,debrisoquin, and dapsone in human plasma using high‐speed gradient liquid chromatography/tandem mass spectrometry on a silica‐based monolithic column

Theophylline, tolbutamide, mephenytoin, debrisoquin, and dapsone are marker substrates for CYP1A2, CYP2C9, CYP2C19, CYP2D6, and CYP3A4, respectively. A silica‐based monolithic column (Chromolith SpeedROD RP‐18e, 50×4.6 mm) was used to separate these five marker substrates of cytochrome P450 within only 84 s. Linear gradient elution was from acetonitrile‐water‐formic acid (10 : 90 : 1, v/v/v) to acetonitrile‐water‐formic acid (90 : 10 : 1, v/v/v) in 1.4 min. The flow rate was 2.5 mL/min. The retention time was 0.52 min for theophylline, 0.67 min for debrisoquin, 0.78 min for dapsone, 0.96 min for mephenytoin, and 1.13 min for tolbutamide. Detection was by tandem mass spectrometry using a PE Sciex API 3000 mass spectrometer with a Turbo‐Ionspray source in positive mode. A simple protein precipitation method was used. This method was validated over the concentration range of 5–2000 ng/mL based on the sample volume of 0.1 mL.     

An improved method for determination of light hydrocarbons in stabilized crude oil

Summary This paper reports a quick, and simple method for quantitative determination of C₂ to C₆ hydrocarbons in stabilized crude oil without using a back flush system. A mixture of crude oil and internal standard is injected into a GC equipped with a 6 meter length of fused silica capillary as a guard column. The light hydrocarbons are separated individually up to the last peak of the hexane group with the heavier components trapped in the guard column. The total analysis time for each sample is 15 minutes. The base line is table for up to 15 consecutive analyses. The guard column and the injector port are then reconditioned by simply heating them for one hour at 300 °C.     

A study of the behaviour of some new column materials in the chromatographic analysis of Cinchona alkaloids

Summary A major problem in the HPLC analysis of alkaloids is the poor peak shape and consequently low resolution, due to the interactions of the basic alkaloids with the residual acidic silanol groups of most reversed phase materials. The performance of new packing materials specially designed for the separation of basic compounds has been studied using mobile phases without the special additives commonly applied in the analysis of alkaloids. Strongly basic Cinchona alkaloids were used as test compounds. Retention characteristics and selectivities of each material were studied, after mobile phase optimisation for the column. The influence of the major factors (nature and content of the organic modifier, pH value, salt concentration) affecting resolution was studied. The mobile phases were chosen so that they could be used in thermospray LC-MS. The addition of salts to the mobile phase improves separation but in general the modification of the mobile phase gave little change in selectivity. The performance of silicabased C₁₈ material proved superior to the polymer materials tested.     

Improved method for the determination of sulfur components in natural gas

Determination of trace concentrations of sulfur components in natural gas is a true analytical challenge. Only analytical procedures based on gas chromatography can meet the sensitivity and accuracy requirements dictated by environmental regulation institutions and modern chemical industry. In the present contribution the sample pretreatment and chromatographic separation steps have been evaluated and optimized based on the use of a flamebased sulfur chemiluminescence detector (SCD) for target compound detection. The proposed instrument consists of a programmed temperature vaporizing (PTV) injector employing a liner packed with Chromosorb 104, a 4 μm thick film apolar column and a flame-based SCD. Using a 13 mL sample loop the detection limit achievable with the new method is 3 μg S/m³. The precision of replicate measure. ments is generally in the range of 5–15% relative standard deviation. Lower detection limits can be achieved by preconcentrating larger sample volumes, e.g. 100 mL.