Shell effects in the symmetric-modal fission of pre-actinide nuclei

Mass distributions of fragments in the low-energy fission of nuclei from ¹⁸⁷Ir to ²¹³At have been analysed. This analysis has shown that shell effects in symmetric-mode fragment mass yields from the fission of pre-actinide nuclei could be described if one assumes the existence of two strongly deformed neutron shells in the arising fragments with neutron numbers N₁ ≈ 52 and N₂ ≈ 68. A new method has been proposed for quantitatively describing the mass distributions of the symmetric fission mode for pre-actinides with A ≈ 180–220.     

介质加载圆柱腔的场分析

本文应用严格场匹配法解决了介质加载圆柱腔的本征问题，计算了圆柱腔在纵向部分填充介质后ＴＥ０１ｎ模和ＴＭ０１ｎ模的本征频率和本征场型的变化。特别分析了本征模式在空气段为截止模的情况。本文的分析方法亦可应用到纵向部分填充介质的传输线和其它形状的谐振腔。     

Stability analysis of abnormal multiplication of plankton using parameter identification technique

This paper presents the mathematical approach for the abnormal multiplication of plankton. An abnormal multiplication can be expressed as an unstable problem and the stability of the system is investigated by introducing eigenvalues of a mathematical equation. The stability of the system can be judged by an eigenvalue based on the Lyapunov's stability theory. In this paper, the Arnoldi‐QR method is used to obtain eigenvalues and eigenvectors of the system. The mode superposition method is employed to create spatial distribution needed to analyse the stability. To obtain the objective eigenvalue, the parameter identification technique is employed. The finite element method is used for the discretization in space. Lake Kasumigaura, which is located in Ibaraki Prefecture in Japan, is selected and actual data in 1975, 1976, 1991 and 2000 are used in order to investigate the stability of the specified lake in Japan. Copyright © 2004 John Wiley & Sons, Ltd.     

Sterically stabilized emulsion polymerization of styrene: Pseudo‐semicontinuous approach

The sterically stabilized emulsion polymerization of styrene initiated by a water‐soluble initiator at different temperatures has been investigated. The rate of polymerization (R_p) versus conversion curve shows the two non‐stationary‐rate intervals typical for the polymerization proceeding under non‐stationary‐state conditions. The shape of the R_p versus conversion curve results from two opposite effects—the increased number of particles and the decreased monomer concentration at reaction loci as the polymerization advances. At elevated temperatures the monomer emulsion equilibrates to a two‐phase or three‐phase system. The upper phase is transparent (monomer), and the lower one is blue colored, typical for microemulsion. After stirring such a multiphase system and initiation of polymerization, the initial coarse polymer emulsion was formed. The average size of monomer/polymer particles strongly decreased up to about 40% conversion and then leveled off. The initial large particles are assumed to be highly monomer‐swollen particles formed by the heteroagglomeration of unstable polymer particles and monomer droplets. The size of the “highly monomer” swollen particles continuously decreases with conversion, and they merge with the growing particles at about 40–50% conversion. The monomer droplets and/or large highly monomer‐swollen polymer particles also serve as a reservoir of monomer and emulsifier. The continuous release of nonionic (hydrophobic) emulsifier from the monomer phase increases the colloidal stability of primary particles and the number of polymer particles, that is, the particle nucleation is shifted to the higher conversion region. Variations of the square and cube of the mean droplet radius with aging time indicate that neither the coalescence nor the Ostwald ripening is the main driving force for the droplet instability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 804–820, 2003     

我国区域绿色技术创新效率的分类测度和提升模式研究——基于非期望产出的SBM-SupSBM模型

本文首先运用考虑非期望产出的SBM-SupSBM模型估计我国各省市绿色技术创新效率并进行分类:稳定上升类、平稳类、大幅度波动类以及下降类。之后从企业内部和外部两方面对绿色技术创新效率提升的影响因素提出假设,着重考虑大幅度波动类别省份的效率提升。运用面板数据模型各影响因素进行验证,结论显示:企业规模对绿色技术创新效率波动较大的省份起到显著的抑制作用,环境规制和技术进步对绿色技术创新效率波动较大的省份作用不明显。针对分析结果,提出结论:在提升绿色技术创新效率的过程中,应注重企业规模和技术进步的协同作用,以及技术的开放程度。     

Polarization of coherent synchrotron radiation from an electron beam rotating in a plasma

After eliminating reflections from the walls of the plasma container, we observed polarization of the coherent synchrotron radiation from a relativistic electron beam rotating in a plasma. Several features of the polarization agree well with calculations based on the single particle synchrotron radiation theory. A particular polarization ratio (Fig. 3) does not, however. We deduce from this direct diffraction of the radiation by the beam electrons. This is strong evidence for beam-particle bunches of size cm. Also, there must be some absorption of the extraordinary wave to account for the observations. We suggest a way to apply these results to measure the pitch angle of the beam.Work supported by Army Research Office.     

三重四极杆电感耦合等离子体质谱(ICP-MS)法测定氧化铕中13种稀土杂质元素

稀土杂质元素直接影响高纯单金属稀土材料的整体性能,是高科技领域许多材料的重要组成部分。通过考察最佳的消解酸量、温度、时间、氧气反应气流量、稀释气流量,建立了基于三重四极杆电感耦合等离子体质谱仪(ICP-MS/MS)直接测定氧化铕中13种稀土杂质元素分析方法。该方法采用0.1%基体直接进样,可以很大程度提高前处理分析效率。利用碰撞模式测定氧化铕稀土中的Y、La、Pr、Nd、Sm、Gd、Tb、Dy、Ho、Er、Yb、Lu元素,氧气质量转移模式测定氧化铕中的Tm,两种模式结合可以有效去除多原子干扰,实现氧化铕的稳定测试分析。通过对氧化铕标准物质（GBW02902）直接测定分析,结果表明,在碰撞和氧气质量转移模式下,各元素线性相关系数（r）均大于 0.9999,方法检出限为0.001~0.023 mg/kg,测试精密度优于1.99%,13种元素的测试值都在认定值的不确定度范围之内。该分析方法操作简单,测试稳定,效率高,为实验室进行氧化铕材料中REE杂质的准确测试分析提供思路和借鉴。     

遗传算法优化变分模态分解提取舰船辐射噪声特征线谱方法

特征线谱提取是舰船目标识别的一个重要研究环节,常采用传统的DEMON谱分析方法,处理过程中,一般对舰船噪声时域信号未予抑噪,低信噪比情况下,传统DEMON谱分析性能差。对此,提出一种采用遗传算法优化变分模态分解方法,用于分解舰船噪声原时域信号,获得抑制噪声后的舰船噪声重构信号,进而有效提取了舰船目标噪声幅度调制特征线谱。该方法首先采用遗传算法优化变分模态分解的两个关键输入参数(分解所取模态个数和惩罚因子),对变分模态分解得到的各阶固有模态分量加以判别,去除噪声主导分量,保留信号主导分量,使重构舰船噪声信号显著抑制了干扰噪声,然后对降噪后的重构信号进行频谱分析,获得目标噪声调制特征线谱。理论分析、仿真和实验数据处理结果表明,相比传统DEMON谱分析法,基于遗传算法优化变分模态分解的舰船噪声特征线谱提取方法具有更好的噪声抑制能力,所获取的舰船噪声幅度调制特征线谱信噪比明显高于传统DEMON方法,具有一定优势,前景良好。     

基于CVMD和DBO-SVM的光纤周界安防信号识别方法

为降低光纤周界安防信号中噪声对分类结果的影响,提升信号分类的准确率和运行效率,提出一种融合了相关变分模态分解(Correlation Variational Mode Decomposition, CVMD)、蜣螂算法(Dung Beetle Optimizer, DBO)和支持向量机(Support Vector Machine, SVM)的分类方法。利用CVMD去除原始信号中的噪声分量,并提取去噪后信号的能量、能量熵和峭度作为特征向量。采用DBO算法优化SVM,得到最佳惩罚因子和核函数参数,并构建DBO-SVM分类模型。搭建了基于相位敏感光时域反射(Φ-OTDR)技术的周界安防系统,采集了攀爬、敲击、踩踏和无入侵四类信号。实验结果表明,CVMD-DBO-SVM的分类准确率相比CVMD-PSO-SVM和CVMD-GA-SVM更高,达到了98.75%,同时运行时间更短,综合性能最优。     

长相关积累STAP处理的星载SAR-GMTI

目前多通道STAP多应用在短相干脉冲积累(CPI)模式的非成像体制雷达地杂波抑制,而对长CPI的SAR成像体制下的讨论较少。文中首先分析两种体制下STAP采用的不同信号模型,研究CPI对回波统计特性的影响和两种体制目标功率谱的差异。然后讨论SAR成像体制下STAP的应用,分析空时去相干性的影响。指出星载非平稳杂波环境中长CPI多普勒后处理的优势:既能有效降低杂波秩,减小样本支持数,同时减弱对空时去相关源的敏感性,又可得到动目标SAR图像。最后给出仿真实例。