An investigation of the accelerated thermal degradation of different epoxy resin composites using X-ray microcomputed tomography and optical coherence tomography

Epoxy resin composites reinforced with hollow glass microspheres, microlight microspheres, 3D parabeam glass, and E-Glass individually were subjected to accelerated thermal degradation conditions. X-ray microcomputed tomography (XμCT) was used to evaluate density changes, reinforcement filler damage, homogeneity, cracks and microcracks in the bulk of the different epoxy resin composites. XμCT 3D images, 2D reconstructed images and voids calculations revealed microspheres damage, filler distributions and showed cracks in all composites with different shapes and volume in response to the thermal degradation conditions. In addition, expansion of air bubbles/voids was observed and recorded in the microsphere and microlight epoxy composite samples. In a complementary way, optical coherence tomography (OCT) was used as a novel optical characterisation technique to study structural changes of the surface and near-surface regions of the composites, uncovering signs of surface shrinkage caused by the thermal treatment. Thus, combining XμCT and OCT proved useful in examining epoxy resin composites' structure, filler-resin interface and surface characteristics.     

An Injectable Integration of Autologous Bioactive Concentrated Growth Factor and Gelatin Methacrylate Hydrogel with Efficient Growth Factor Release and 3D Spatial Structure for Accelerated Wound Healing

Growth factors are essential for wound healing owing to their multiple reparative effects. Concentrated growth factor (CGF) is a third-generation platelet extract containing various endogenous growth factors. Herein, a CGF extract solution is combined with gelatin methacrylate (GM) by physical blending to produce GM@CGF hydrogels for wound repair. The GM@CGF hydrogels show no immune rejection during autologous transplantation. Compared to CGF, GM@CGF hydrogels not only exhibit excellent plasticity and adhesivity but also prevent rapid release and degradation of growth factors. The GM@CGF hydrogels display good injectability, self-healing, swelling, and degradability along with outstanding cytocompatibility, angiogenic functions, chemotactic functions, and cell migration-promoting capabilities in vitro. The GM@CGF hydrogel can release various effective molecules to rapidly initiate wound repair, stimulate the expressions of type I collagen, transform growth factor β1, epidermal growth factor, and vascular endothelial growth factor, promote the production of granulation tissues, vascular regeneration and reconstruction, collagen deposition, and epidermal cell migration, as well as prevent excessive scar formation. In conclusion, the injectable GM@CGF hydrogel can release various growth factors and provide a 3D spatial structure to accelerate wound repair, thereby providing a foundation for the clinical application and translation of CGF.     

Physicochemical Properties and Elimination of the Activity of Anti-Nutritional Serine Protease Inhibitors from Mulberry Leaves

Mulberry leaf is an excellent protein resource that can be used as feed additive for livestock and poultry. Nevertheless, the use of mulberry leaves in animal diets is limited by its protease inhibitors, tannic acid and other anti-nutritional factors. This study systematically analyzed the type and activity of serine protease inhibitors (SPIs) from the leaves of 34 mulberry varieties, aiming to reveal the physicochemical properties and inactivation mechanism of SPIs. The types and activities of trypsin inhibitors (TIs) and chymotrypsin inhibitors (CIs) exhibited polymorphisms among different mulberry varieties. The highest number of types of inhibitors was detected in Jinshi, with six TIs (TI-1~TI-6) and six CIs (CI-1~CI-6). TIs and CIs exhibited strong thermal and acid–base stability. High-temperature and high-pressure treatment could reduce the activities of TIs and CIs to a certain extent. β-mercaptoethanol treatment could completely abolish TIs and CIs, suggesting that the disulfide bridges were critical for their inhibitory activities. The Maillard reaction could effectively eliminate the inhibitory activities of TI-1~TI-4 and CI-1~CI-4. This study reveals the physicochemical properties and inactivation mechanisms of the anti-nutritional SPIs from mulberry leaves, which is helpful to exploit mulberry-leaf food with low-activity SPIs, promote the development and utilization of mulberry-leaf resources in animal feed and provide reference for mulberry breeding with different functions.     

一种巴特勒低噪声声表面波振荡器的设计

从提高有载品质因数QL的角度出发设计了一种315 MHz低噪声声表面波振荡器.通过分析巴特勒共基声表面波振荡电路得到了QL的表示式,在此基础上设计了一个实际的315 MHz巴特勒共基声表面波振荡器样机,并对其进行了相位噪声测试.设计中使用的声表面波谐振器是R3t5,其无载品质因数Q0约为1.06×104,实际测得该振荡器的相位噪声结果为-129 dBc/Hz@1 kHz和-161 dBc/Hz@10 kHz.     

A Coumarin Triflate Reagent Enables One-Step Synthesis of Photo-Caged Lipid Metabolites for Studying Cell Signaling

Photorelease of caged compounds is among the most powerful experimental approaches for studying cellular functions on fast timescales. However, its full potential has yet to be exploited, as the number of caged small molecules available for cell biological studies has been limited by synthetic challenges. Addressing this problem, a straightforward, one-step procedure for efficiently synthesizing caged compounds was developed. An in situ generated benzylic coumarin triflate reagent was used to specifically functionalize carboxylate and phosphate moieties in the presence of free hydroxy groups, generating various caged lipid metabolites, including a number of GPCR ligands. By combining the photo-caged ligands with the respective receptors, an easily implementable experimental platform for the optical control and analysis of GPCR-mediated signal transduction in living cells was developed. Ultimately, the described synthetic strategy allows rapid generation of photo-caged small molecules and thus greatly facilitates the analysis of their biological roles in live cell microscopy assays.     

Optimizing electron-capture detector performance for gas chromatographic analysis of polychlorinated biphenyls

Summary A modified simplex technique has been applied to optimize the performance of an electron-capture detector under constant-current and constant-frequency pulse modes for the gas chromatographic analysis of polychlorinated biphenyls. Optimal performance was obtained by adjusting the four experimental parameters of pulse voltage, detector temperature, make-up gas flow rate, and reference current (or pulse frequency) using the signal-to-noise ratio of the eluting peak as the criterion. The results show that constant-current pulse mode has better sensitivity and dynamic range whereas the constant-frequency pulse mode has the lower detection limit. Subsequent principal component factor analysis indicated that similar performance is achievable using only three parameters.     

How the interplay of different control mechanisms affects the initiator efficiency factor in controlled radical polymerization: An investigation using organometallic Mo-based catalysts

Compound CpMoI₂(iPr₂dad) (iPr₂dad = iPrNCHCHNiPr), obtained by halide exchange from CpMoCl₂(iPr₂dad) and NaI, has been isolated and characterized by EPR spectroscopy, cyclic voltammetry, and X-ray crystallography. Its action as a catalyst in atom transfer radical polymerization (ATRP) and as a spin trap in organometallic radical polymerization (OMRP) of styrene and methyl acrylate (MA) monomers has been investigated and compared with that of the dichloro analogue. Compound CpMoCl₂(iPr₂dad) catalyzes the ATRP of styrene and MA with low efficiency factors f (as low as 0.37 for MA and ethyl 2-chloropropionate as initiator), while it irreversibly traps the corresponding growing radical chains under OMRP conditions. On the other hand, compound CpMoI₂(iPr₂dad) has a greater ATRP catalytic activity than the dichloro analogue and yields f = 1 for MA and ethyl 2-iodopropionate as initiator. Under OMRP conditions, it does not irreversibly trap the growing radical chains. This comparison serves to illustrate the general principle that low initiator efficiency factors, sometimes observed in ATRP, may result from the interplay of the ATRP and OMRP mechanisms, when the latter ones involves an irreversible radical trapping process.     

Ultrasensitive aptamer-based bio bar code immunomagnetic separation and electrochemiluminescence method for the detection of protein

An ultrasensitive aptamer-based bio bar code immunomagnetic separation and electrochemiluminescence (IM-ECL) method for the detection of protein is developed. The target protein is captured by biotin-labeled aptamer (biotin probe) and [Ru(bpy)₃]²⁺ (TBR)-Au bio bar code-labeled aptamer (ECL nanoprobe), to form a double aptamer–protein sandwich complex. The complex is then immobilized on the streptavidin microbeads through biotin–streptavidin linkage and detected by ECL assay. The ECL signal of the target protein is amplified by the TBR-bio bar code DNAs. As an example, platelet-derived growth factor B-chain homodimer (PDGF-BB) was detected by the method. Experimental results show that the detection limit of the assay is 1 pM of PDGF-BB. A calibration curve with a linearity range from 1 pM to 10 nM is established, thus, make quantitative analysis possible. The method has been used to detect PDGF-BB in fetal calf serum with minimum background interference. Due to the wide availability of aptamer for numerous proteins, this aptamer-based bio bar code IM-ECL method holds great promise in protein detection.     

Dielectric Relaxation Study of Liquids Having Chloro Group with Associated Liquids. I. Chlorobenzene with Methanol, Ethanol, and 1-Propanol

The complex permittivity for chlorobenzene–alcohol binary mixtures have been determined over the frequency range of 10 MHz to 20 GHz, at 15, 25, 35, and 45°C, using the time-domain reflectometry (TDR) method for 11 concentrations of each chlorobenzene–alcohol system. The alcohols used were methanol, ethanol, and 1-propanol. The values of static dielectric constant, relaxation time, the corresponding excess properties, the Redlich–Kister coefficients up to the third order, the Kirkwood correlation factor, and thermodynamic parameters of the mixtures have been determined. The excess permittivity is found to be negative for chlorobenzene–methanol and chlorobenzene–ethanol, whereas it is positive in the 1-propanol rich region. The excess inverse relaxation time is negative for all the systems studied here. The Kirkwood effective correlation factor increases with an increasing in the molecular size of the alcohol, but decreases with increasing temperature.     

子窗口分析法用于偶氮染料GC-MS重叠峰的解析

 将子窗口因子分析法 (SWFA)应用于GC MS联用检测数据分析 ,并以两种偶氮染料 3,3′ 二氯联苯胺和 4,4′ 次甲基 双 (2 氯苯胺 )重叠图谱为例进行了解析。结果表明 ,此方法可直接进行目标组分的质谱分辨 ,得到目标组分的质谱图 ,进而得到该组分的色谱图。其结果准确、可靠。与窗口因子分析相比 ,子窗口的选择更加容易 ,人工干预少 ,解析速度快。