Syntheses and Crystal Structures of Some CCo3 Clusters Containing PPh3 or dppm Ligands

Molecular structural determinations are reported for six Co₃C carbonyl cluster complexes containing tertiary phosphines, which have been isolated as by-products from a variety of reactions. Structural features are similar to those of related complexes already reported. Some discussion of apparent orientational preferences of the CH₂ group of dppm ligands, which appear to enter into H-bonding interactions with amido or carboxylate substituents, is given. Appropriate comparisons are made with unsubstituted analogues.     

Carburizing of titanium with plasma jets under reduced pressure

The carburizing of titanium with argon-methane (0.1%) and argon-methane (0.1%)-hydrogen (2%) plasma jets at a pressure of 200 Torr was studied. The carburizing of titanium was not successful with the argon-methane plasma jet because the specimen was covered with graphitic carbon. A hard and thick TiC layer was formed by the argon-methane-hydrogen plasma jet in a short time without the deposition of graphitic carbon. Emission spectra from the plasma jets show that the addition of hydrogen increases the amount of CH radicals as well as decreases the amount of C₂ and C in the plasma jet. The decrease of C₂ and C suppresses the deposition of graphitic carbon and enhances the TiC formation.Partly presented at Gordon Research Conference on Plasma Chemistry, August 11–15, 1986, Tilton, New Hampshire.     

Effects of EG and MoSi2 on thermal degradation of intumescent coating

An intumescent flame retardant coating was prepared with resin, solvent and flame retardant system composed of ammonium polyphosphate-APP, pentaerythritol-PER and melamine-MEL. The modifiers such as molybdenum disilicide (MoSi₂) and expandable graphite (EG) were used to improve the performances of the APP-PER-MEL coating. The effects of EG, MoSi₂ and MoSi₂/EG on the fireproofing time and char formation of the coating were investigated by using heat insulation test, thermogravimetric analysis (TGA), differential thermal analysis (DTA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electric microscope (SEM). The results showed that by adding modifiers, the fireproofing time was prolonged and char formation rate was evidently enhanced. The largest improvement was achieved with 9 wt.% MoSi₂/5 wt.% EG, XPS analysis indicated that the performance of anti-oxidation of the coating was improved by adding EG and MoSi₂, and SEM images showed that a good synergistic effect was obtained through a ceramic-like layer produced by MoSi₂ covered on the surface of “open-cellular” structural char.     

Silicon Carbide Supported Palladium‐Iridium Bimetallic Catalysts for Efficient Selective Hydrogenation of Cinnamaldehyde

Selective hydrogenation of α,β‐unsaturated carbonyls into saturated carbonyls is important to obtain remunerative products. However, it is still a challenge to achieve high activity and selectivity under mild conditions. Herein, Pd, Ir and bimetallic Pd‐Ir nanoparticles were uniformly deposited with high dispersity on the surface of SiC by a facile impregnation method, respectively. The as‐prepared Pd/SiC catalysts efficiently hydrogenate cinnamaldehyde to hydrocinnamaldehyde at room temperature and atmospheric pressure, and the activity of Pd/SiC is observed further enhanced by adding Ir component (conversion of 100%). In addition, the dependence of Pd‐Ir catalyst activity on Pd/Ir molar ratio confirms a synergistic effect between Ir and Pd, which originates from the electron transfer between Pd and Ir.     

碳化硼纳米线的制备和结构

以碳纳米管为模板，通过加热碳纳米管与硼粉的混合物，获得了笔直的硼碳纳米线.对纳米线的结构和成分进行研究，结果表明纳米线主要为B4C纳米线.在部分B4C纳米线的端部存在Ni颗粒，这些端部具有Ni颗粒的纳米线构成了纳米磁针.讨论了B4C纳米线的生长机制，B4C纳米线的生长主要为硼原子在碳纳米管中扩散并发生化学反应，使得碳纳米管晶格结构发生重组，形成B4C纳米线.反应后，硼原子部分取代了碳纳米管中碳原子，修补了碳纳米管中的晶格缺陷，获得了形态笔直的B4C纳米线.     

Die Gadoliniumcarbidhalogenide Gd4C2X3 (X = Cl,Br)

The Gadolinium Carbide Halides, Gd₄C₂X₃ (X = Cl, Br) The compounds Gd₄C₂X₃ (X = Cl, Br) and Tb₄C₂Br₃ have been prepared by reaction of the metals (RE), REX₃, and C in sealed Ta capsules at 1 100° and 1 300°C, respectively. Monophasic samples of Gd₄C₂Br₃ and Tb₄C₂Br₃ were obtained by reacting stoichiometric mixtures of the starting materials for five days. The needle shaped crystals are bronze-coloured and sensitive to air and moisture. Gd₄C₂X₃ crystallizes in the space group Pnma (No. 62) with lattice constants a = 1 059.6(4), b = 368.4(1), c = 1 962.7(8) pm (Gd₄C₂Cl₃), a = 1 084.4(1), b = 373.0(1), c = 2 036.1(1) pm (Gd₄C₂Br₃). According to Guinier photographs, Tb₄C₂Br₃ is isotypic (a = 1 074.3(2), b = 370.6(1), c = 2 019.4(1) pm). In the crystal structure C is octahedrally coordinated by Gd. The Gd₆ octahedra are linked via common edges to form corrugated layers. The X-anions coordinate all free edges and corners of these layers and connect them via Xⁱ? Xⁱ contacts parallel [001]. Gd₄C₂Br₃ shows metallic conductivity. The magnetic susceptibility follows at high temperatures a Curie Weiss law with an effective moment of 7.95 μ_B. At temperatures below 50 K antiferromagnetic order is observed.     

Characterization of chromate conversion coating on AA7075‐T6 aluminum alloy

Chromate conversion coatings (CCCs) on AA7075‐T6 were characterized using scanning electron microscopy, focused ion beam sectioning and scanning transmission electron microscopy with nano‐electron dispersive spectroscopy line profiling. The thickness and composition of the CCC was different at different locations on the heterogeneous microstructure of AA7075‐T6. The coating formed on the matrix phase was much thicker than that formed on the coarse Al–Cu–Mg, Al–Fe–Cu and Mg–Si intermetallic particles. Nano‐electron dispersive spectroscopy line profiling indicated that the coating on the Al–Fe–Cu particles was similar to the CCC formed on the phase matrix, primarily a chromium oxide. However, the coatings on the Al–Cu–Mg and Mg–Si particles were mixed Al/Mg/Cr oxide and Mg oxide, respectively. The growth of CCC followed a linear‐logarithmic kinetic rate law. The observations of this study support the sol‐gel model of CCC formation. Copyright © 2004 John Wiley & Sons, Ltd.     

Solid phase immune reactions as monitored by sedimentation field-flow fractionation

Summary Sedimentation field-flow fractionation was shown to permit the precise evaluation of surface concentrations of human IgG, adsorbed to polystyrene latex spheres of different sizes. Unlike conventional techniques for measuring protein uptake by colloidal substrates, this method allowed a direct evaluation of mass adsorbed per unit area, without the need for potentially destructive labelling reactions. Thus, a four hour adsorption of IgG from a 3–10 fold excess of protein in solution yielded surface concentrations which were 1.4±0.1 mg/m² on a 272 nm latex and 1.9±0.1 mg/m² on a latex with a diameter of 142 nm. The lower value coincided with the estimated monolayer surface coverage. The IgG-PS 272 nm adsorption complex was shown to take up negligible amounts of HSA from a 10 mg/mL solution, while its specific uptake of a polyclonal rabbit anti-human IgG was 2.6 molecules per molecule of adsorbed antigen. The same ratio was found for the smaller particles. The surface concentration of adsorbed second antibody, often crucial in immunodiagnostic quantifications, was therefore found to be significantly enhanced by the increased substrate curvature presented by the smaller particles.Dedicated to Professor Leslie S. Ettre on the occasion of his 70th birthday.     

Investigation of Glass-Like Sol-Gel Coatings for Corrosion Protection of Stainless Steel Against Liquid and Gaseous Attack

Glass-like sol-gel coatings have been investigated as corrosion protective coatings on stainless steel. Magnesium- and borosilicate coatings with thickness of about 100–700 nm and methyl-modified SiO2 coatings with a thickness of about 2 m were deposited on stainless steel plates by dip-coating. The coatings were densified between 400°C and 500°C in different atmospheres (N2, air) for 1 h. The corrosion protection against gaseous attack was investigated by accelerated corrosion tests, at 800°C in air for 1 h. A corrosion protection factor was calculated from the relation Fe/Fe2O3, determined by XRD on the surface of coated and uncoated samples. Methyl-modified SiO2 coatings showed a protection factor, which was 2 orders of magnitude higher than for the other coatings. Electrochemical investigations were performed on samples submerged in a NaCl solution for 200 h. The corrosion propagation, polarization resistance and impedance vector were measured. For accelerated corrosion tests, polarization intensity curves were determined for high potentials of up to 1 V. Again excellent results were obtained for the methyl-modified SiO2 coatings, which remained passive for 200 h. Results of the salt spray corrosion test, however, showed no corrosion protection by the sol-gel coatings. After 2000 h in the salt spray chamber the steel was corroded and the coatings peeled off. It is concluded that for the further development of these coatings an improved interfacial passivation will be required.     

Chiral stationary phases for LC and SFC obtained by “Polymer coating”

Summary Chirally substituted Si–H-containing polysiloxanes were synthesized, which can be immobilized on small particle silica gel as well as on the smooth surfaces of fused silica capillaries. Immobilization is achieved either by crosslinking or by chemical bonding to the surfaces via silanol groups; both reactions can only be performed by addition of H₂PtCl₆, which acts as catalyst for hydrosilylation and as stoichiometric reagent for crosslinking. Chiral substituents of systematically varied chemical structure were introduced into the polysiloxanes by hydrosilylation. The mechanism of immobilization was investigated by spectroscopic methods, notably²⁹Si-NMR. Homogenous stationary-phase coatings of variable film thickness and corresponding retentivity can easily be achieved. The enantioselectivity of the phase systems was characterized in dependency on the chemical structure of the chiral selectors attached to the polysiloxane chain of the chiral stationary phases and also in terms of the functional groups introduced into the solutes by derivatisation.