8-羟基喹啉对甲基苯酚合锌配合物的合成及光致发光和电致发光性能

有机电致发光 ( EL )技术作为一种有着广阔应用前景的显示技术 ,自 1 987年 [1] 以来已获得了空前迅速的发展 .部分发光器件的亮度、效率和寿命已经达到或接近实用化的程度 .许多有机化合物 [2～ 5] ,包括小分子和聚合物 ,已被用于制备有机 LEDs.应用于有机 EL的化合物很多 ,这为优化和筛选优秀的 EL材料提供了基础 .以 8-羟基喹啉铝为代表的有机金属配合物是一类重要的有机 EL材料 ,这类材料荧光效率高、易于提纯且性质比较稳定 .目前应用于有机 EL金属配合物的发光材料大多配位数均为偶数 ,四配位的 8-羟基喹啉锌配合物 ( Znq2 ) [6…     

Enhanced electrodeposition of indium hexacyanoferrate thin films through improved plating solution stability

An ordinary plating solution for indium hexacyanoferrate (InHCF) thin film deposition, mainly composed of equal concentrations of In³⁺ and [Fe(CN)₆]^3–, usually forms precipitates rapidly when either concentration is higher than few millimolar. This contributes to the plating solution's instability. Moreover, electrodeposited capacities are limited accordingly. In this work, the plating solution's stability and the electrodeposition of InHCF were greatly enhanced by adding a large amount of K⁺ and/or H⁺. It was found that a 10-mM plating solution added with 1 M HCl and 1 M KCl could be stored as fresh over a one-week period, whereas an unmodified plating solution became useless within a couple of minutes. Also, such cationic additions, especially adding H⁺, increased the electrodeposited capacity ca. 18 times at least, as compared with that obtained from the unmodified plating solution. Furthermore, related enhancing mechanisms were proposed and verified. To sum up, this study offers a means for better InHCF electrodeposition and should promote the applications of InHCF films. Electronic Publication     

氧化钨薄膜微型电化学器件的研究

本文论述了WO_3薄膜氢离子敏器件的结构、原理、制备技术和测试分析。利用WO_3薄膜在H+溶液中由绝缘转化为导电特性,成功地研制成氢离子敏器件。这是一种简易而经济的微型pH敏器件技术。     

Dynamic optimization problems with bounded terminal conditions

Bounded terminal conditions of nonlinear optimization problems are converted to equality terminal conditions via the Valentine's device. In so doing, additional unknown parameters are introduced into the problem. The transformed problems can still be easily solved using the sequential gradient-restoration algorithm (SGRA) via a simple augmentation of the unknown parameter vector . Three example problems with bounded terminal conditions are solved to verify this technique.This research was supported in part by the National Aeronautics and Space Administration under NASA Grant No. NCC 2-106.     

Isomorphic electron orbitals for vibronic flexibility in a cyclopropenyl radical molecular device

Summary The vibronic character of this molecular device has been studied using isomorphic electron orbitals. The leading role of the softest vibrational mode for the electron transport process is stressed by the quantum mechanical treatment of the rearrangement operator. The theory was used to investigate the possible function of the soliton valve, which has been suggested as a switching tip. The electronic flexibility of the cyclopropenyl radical with respect to molecular vibrations, which is important for the function of the molecular device, is well characterized by the hardness and softness of the electron structure in terms of the orbital energy-occupation number correlation diagram.     

A soluble and multichromic conducting polythiophene derivative

A new soluble polythiophene derivative was synthesized by both chemical and electrochemical oxidative polymerization of 1-4-nitrophenyl-2,5-di(2-thienyl)-1H-pyrrole (SNSNO₂). Chemical method produces a polymer which is completely soluble in organic solvents. The structures of both the monomer and the soluble polymer were elucidated by ¹H and ¹³C-NMR and FTIR. The average molecular weight has been determined by GPC to be Mn = 6.3 × 10³ for the chemically synthesized polymer. P(SNSNO₂) was also synthesized via potentiostatic electrochemical polymerization. Characterizations of the resulting polymer were performed by cyclic voltammetry CV, FTIR and UV-Vis spectroscopy. Four-probe technique was used to measure the conductivities of the samples. Moreover, the spectroelectrochemical and electrochromic properties of the polymer film were investigated. In addition, dual type polymer electrochromic devices ECDs based on P(SNSNO₂) with poly3,4-ethylenedioxythiophene (PEDOT) were constructed. Spectroelectrochemistry, electrochromic switching and open circuit stability of the devices were studied. They were found to have good switching times, reasonable contrasts and optical memories.     

水杨醛缩氨基硫脲合钴(Ⅱ)的晶体结构及其荧光性质

在甲醇和DMF溶剂里,以Schiff碱水杨醛缩氨基硫脲(简写为HL)和六水二氯化钴合成了配合物[CoHL2].H2O.DMF.在配合物[CoHL2]中,钴(Ⅱ)原子具有扭曲的N2O2S2八面体配位构型,晶体通过分子间氢键作用形成二维的无限网状结构.红外光谱表明,配体在形成配合物后,νS=O,νC=O和νC=N红移.荧光光谱表明,配合物金属对配体n-π*激发引起的荧光发射峰有较大的影响.     

Effect of monomer concentration on characteristics of methacrylic acid-grafted polyethylene film prepared by photografting

The effect of monomer concentration on photografting of methacrylic acid (MAA) onto linear low-density polyethylene (PE) film (thickness=30 μm) was investigated at 60 °C in water solvent together with the location of MAA-grafted chains. Xanthone was used as a photoinitiator which was coated on the film sample earlier. The higher percentage of grafting and graft efficiency were afforded for the system with the higher monomer concentration. The resultant MAA-grafted films were subjected to measurements of pH-responsive character and ability to adsorb cupric ion in order to understand the characteristics of function introduced. The grafted samples exhibited the pH-responsive character, where they shrank and swelled in acidic and alkaline media, respectively. The pH-responsive character of the grafted films was higher for the samples prepared in the system with a higher monomer concentration. Moreover, the grafted samples exhibited the ability to adsorb cupric ion, and the ability was reduced when the sample was prepared in the system with a higher monomer concentration. The different extents of the pH-responsive character and ability to adsorb cupric ion of the resulting grafted PE films were discussed in terms of location of grafted chains in the film substrate, which was determined by a scanning electron microscope and an attenuated total reflection infrared spectroscopy.     

Dependence of Performance of Organic Light-emitting Devices on Sheet Resistance of Indium-tin-oxide Anodes

IntroductionIndium-tin-oxide(ITO) has been widely used asthe anode material in organic light-emitting devices(OLEDs) because of its high transmittance in the visi-ble region and low electrical resistivity. In the pastyears, many investigations focused on …     

Preparation of a Star Network PEG-based Gel Polymer Electrolyte and Its Application to Electrochromic Devices

A star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized, and its corresponding gel polymer electrolyte based on lithium perchlorate and plasticizers EC/PC with the character being colorless and highly transparent has been also prepared. The polymer host was characterized and confirmed to be of a star network and an amorphous structure by FTIR, ^1H NMR and XRD studies. The polymer host hold good mechanical properties for pentaerythritol cross-linking. Maximum ionic conductivity of the prepared polymer electrolyte has reached 8.83 × 10 ^-4 S·cm^-1 at room temperature. Thermogravimetry （TG） of the polymer electrolyte showed that the thermal stability was up to at least 150 ℃. The gel polymer electrolyte was further evaluated in electrochromic devices fabricated by transparent PET-ITO and electrochromically active viologen derivative films, and its excellent performance promised the usage of the gel polymer electrolyte as ionic conductor material in electrochrornic devices.