Spectroscopy on very neutron-rich nuclei beyond N = 20

Recent studies on nuclear structure by using radioactive isotope beams available at the RIKEN projectile-fragment separator (RIPS) are introduced. Special emphasis is given to two selected experiments from recent programs that highlight studies on the magicity loss observed for very neutron-rich nuclei beyond N = 20 in the “island-of-inversion” region; the particle stability of ³¹F, and the low-lying excited states of ³⁴Mg. Received: 1 May 2001 / Accepted: 4 December 2001     

透射式跑道能见度激光测量仪的研究

介绍了一种利用激光测量跑道水平及斜视能见度的智能化仪器。该仪器主要由光学系统、信号放大与处理系统及显示系统三部分组成。简要介绍了该仪器的基本结构、工作原理和主要技术指标，讨论了其中的技术难点及其相应的解决办法。     

反光板(合作目标)反射率测量仪

本文介绍了反光板（合作目标）反射率测量仪的研制。仪器采用对称双光路比较测量法，给定两束相等光通量的光束，分别作为参考光束和测试光束，并用分束器实现原光路取样，从而解决了合作目标反光板入射光线与反射光线重合不能用常规测试方法来检测的难题。由于采用对称双光路的方法，入射光通量是相对恒定的，不受外界因素影响，从而使反射率测量仪达到精度高、重复性好和环境要求低的设计要求。     

Determination of cake thickness and porosity during cross-flow ultrafiltration on a plane ceramic membrane surface using an electrochemical method

The thickness and the porosity of a deposit during ultrafiltration experiments are determined using an electrochemical method. Twenty microelectrodes are mounted flush to a ceramic plane membrane and maps of deposit thickness are determined for three inlet/outlet distributors configurations. Combining an electrochemical method and a step transient method, the determination of the thickness and the porosity of a particles deposit is performed. These local thickness and porosity values are analyzed thanks to wall shear stress local measurements obtained in a previous work [Sep. Sci. Technol. 37 (10) (2002) 2251]. The results emphasize the heterogeneity of the deposit thickness, especially in zones of low wall shear stress. Furthermore, the porosity values of the deposit are ranged between 0.3 and 0.8 as a function of the location at the membrane surface.     

Sol-gel processing of inorganic membranes

Basic principles involved in sol-gel processing of ceramic membranes are described. This process has been applied to ceramic ultrafiltration membranes and is now investigated to prepare ceramic nanofilters. In this paper special emphasis is put on new developments concerning microporous zirconia membranes obtained by the polymeric route. A zirconium alkoxide precursor modified with an acetylacetone ligand has been used in order to control particle growth in the sols and pore size distribution in the membranes. N₂ adsorption and X-ray diffraction analysis have been performed on membrane materials showing the influence of process parameters (molar ratio r = acacH/Zr and sintering temperature T) on membrane structural evolution.     

Preparation and Characterization of Nano-ZnFe2O4/TiO2 Films

The nano-ZnFe2O4/TiO2 films possess the functions of desulfurization and degradation for organic pollutants. The sols of ZnFe2O4/TiO2 were prepared by sol-gel method and coated on glass and porous ceramic by vertical coating and dipping-lift processes, respectively, and the samples were obtained after drying and sintering. The composition, appearance, absorption spectrum of the films, and the influence of the film on porous ceramic performances were analyzed using SEM, AFM, UV-Vis spectrometer, and mercury porosimeter, respectively, to determine the operation parameters of the multifunction porous ceramic elements for gas-purification.     

基于课程标准的教学——以常见阴、阳离子的检验为例

以常见的阴、阳离子的检验为例，研究了如何实施基于标准的教学。校本教材的开发为标准、教材、教学、评价的一致性提供保障；以学生应知的和能做的驱动课堂活动；根据达成标准应有怎样的质量表现，试卷编制先于教学设计。课堂上，“教”“学”双方都明确学习目标，教师提供多种策略来满足学生多样的学习需要，如提供工具，搭建脚手架，并以“微”研究性学习的方式展开教学，给学生提供了充分的进步空间。     

First‐principles study of metal/nitride polar interfaces: Ti/TiN

We have examined the optimal interface structure, ideal work of adhesion and bonding character of polar Ti(110)/TiN(111) interfaces by first‐principles density‐functional plane‐wave pseudopotential calculations. Both Ti‐ and N‐terminated interfaces, including six different interface structures, were calculated. The interface structure for each termination, continuing the TiN crystal structure across the interface, has the largest work of adhesion. Although both terminations yield substantial adhesion energies in the range 3–7 J m^?2, the N‐terminated interface is ～4 J m^?2 stronger than the Ti‐terminated interface. Analysis of the interfacial electronic structure shows that the Ti‐terminated interface is a mixed strong, metallic and weak covalent character, whereas the N‐terminated interface is a polar covalent bond similar to the Ti/TiC interface. Further study of the separation of the optimal interface shows that the cleavages will never fracture at the interface due to the strong bonding, which is consistent with the experimental results. Copyright © 2003 John Wiley & Sons, Ltd.     

基于自适应对比度增强的红外小目标检测网络

红外探测系统需要尽早发现目标以便及时拦截,但是红外图像上的小目标检测是一个挑战十足的任务。为了提高检测准确率,提出一种基于自适应对比度增强的红外小目标检测方法。为了利用自注意力机制和卷积各自的优势,设计了一个高效的特征提取网络和一个面向小目标的检测头。同时为了解决实际应用中出现的弱目标,在检测子网络前添加了一个图像预处理子网络,该模块可以自适应地调节图像对比度。在红外空中小目标数据集上的实验表明,提出的方法能达到93.76%的检测精度,与经典的检测方法相比,能够更好地平衡检测精度和召回率,证明了方法的巨大应用潜力。