差分吸收光谱法测量大气污染的测量误差分析

差分吸收光谱技术被广泛地应用于测量大气中微量元素的浓度，尽管该技术利用最小二乘法来反演待测气体的浓度，能够得到很高的测量精度。但是，由于仪器本身的噪声以及测量波段其它气体的干扰等，使得仪器的测量有一定的误差，而且上述因素还决定着仪器的测量下限。对差分吸收光谱方法的测量误差以及引起误差的原因作了详细的分析。     

宽带膜厚实时监控过程中膜层折射率的确定方法

为了准确计算出镀膜过程中每层膜的折射率，介绍了实时监控过程中确定膜层折射率的2种方法：一种是由实测的透射比光谱直接反算出膜层的折射率；另一种是用最小二乘法的优化算法实时拟合折射率。试验结果表明：在线反算适合单点监控，所得折射率误差小于2%。然而在实际镀膜过程中,由于宽带内膜层参数误差较大,一般大于25%。为此，采用最小二乘法拟合，即在整个宽光谱范围内采集每个波长点的信息，所得结果误差很小，一般都在2％～5%之间,有时可达到10%,在很大程度上提高了实际镀膜时膜厚监控的精度。     

用γ计数率的变化定位核元件的技术研究

用标准放射源进行模拟核材料库房监控实验,当放射源被转移出系统的时候,在不同位置探测了γ计数率变化,根据γ计数率变化的距离平方反比规律实现了被转移的放射源的定位,并估算了该放射源的源强.     

一种新型波长转换器的模块化设计

对一种新型结构全光波长转换器进行了高精度、高稳定度的模块化设计，并利用该模块实现对波长转换器参数的监控。结果表明这种新型模块对波长转换器的实现提供了可靠的保证，表现出较高的稳定度和实用性。     

VSC8150在波分复用系统开销提取中的应用

波分复用系统将不同波长的光复用在一起进行传输,以满足对传输容量和传输距离的各种需求。介绍了一种开销监视与提取的设计方法,使用VSC8150提取承载在波分复用系统相应波长上SDH信号的开销。分析了VSC8150的工作原理,管脚和外部接口,以及与FPGA、单片机共同完成B1重新计算,开销提取,B1,J0提取。此外,还提出将帧丢失,帧失步等错误状态传送给单片机和网管的方法。本设计增强了波分复用系统网管管理参数,功能和灵活性,这会在系统维护时带来较大的方便。该设计已经成熟应用在实际的波分复用系统中。     

Membrane introduction mass spectrometry

An overview of membrane introduction mass spectrometry (MIMS) is presented and comparisons are made with other direct sample introduction techniques. Special attention is given to the unique advantages and the limitations of newer variants on the MIMS technique, including affinity MIMS, reverse-phase and trap MIMS. The salient features of the interfaces used in MIMS are summarized and the various membrane materials commonly used are delineated. The applicability of MIMS is illustrated via discussion of

1. (i) bioreactor monitoring (represented by yeast fermentation),

2. (ii) environmental monitoring (illustrated by analysis of contaminated ground water samples) and

3. (iii) on-line chemical reaction monitoring (exemplified by the photolysis of aryl esters).

The applicability of MIMS to the analysis of environmental samples, including complex mixtures in water, air and soil, is noted.     

激光除锈过程的实时监测技术研究

对激光除锈过程中的实时监测技术进行了实验研究,结果表明:除锈过程中产生的声波强度会随着表面清洁度的变化而发生明显的变化,声波信号包含了除锈过程中的大量信息,可作为激光除锈实时监测的基本信号.     

Monitoring the packet gap of real-time packet traffic

Real-time packet traffic is characterized by a strict deadline on the end-to-end time delay and an upper bound on the information loss. Due to the high correlation among consecutive packets, the individual packet loss does not well characterize the performance of real-time packet sessions. An additional measure of packet loss is necessary to adequately assess the quality of each real-time connection. The additional measure considered here is the average number of consecutively lost packets, also called the average packet gap. We derive a closed form for the average packet gap for the multiclassG/G/m/B queueing system in equilibrium and show that it only depends on the loss behavior of two consecutive packets. This result considerably simplifies the monitoring process of real-time packet traffic sessions. If the packet loss process is markovian, the consecutive packet loss has a geometric distribution.     

New fluorescence probes for monitoring the kinetics of laser-initiated polymerization

Several new fluorescence probes useful for following photopolymerization have been characterized. Among these are probes which can be used in rapidly gelling monomer mixtures and for photochemical polymerization initiated by very high laser powers. Systems which can be used with polyolacrylates and either with visible initiators or with UV initiators are reported. © 1993 John Wiley & Sons, Inc.     

Self-Organized Monitoring in Ad-Hoc Networks

We propose in this paper a self-organized monitoring architecture for mobile ad-hoc networks based on a selective scheme where subsets of nodes are managed. These nodes are determined based on their network behavior in order to favor subsets of well-connected nodes. The key idea is to relax the requirements of the management plane, and to use these manageable subsets to monitor the performance of the overall network. We therefore propose a new performance metric to be monitored, in order to estimate the capability of ad-hoc nodes to communicate end-to-end in the network. Extensive simulations show how different parameters affect this metric.