Mitigating Detrimental Effect of Self-Doping Near the Anode in Highly Efficient Organic Solar Cells

Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) has been one of the most established hole transport layers (HTL) in organic solar cells (OSCs) for several decades. However, the presence of PSS⁻ ions is known to deteriorate device performance via a number of mechanisms including diffusion to the HTL-active layer interface and unwanted local chemical reactions. In this study, it is shown that PSS⁻ ions can also result in local p-doping in the high efficiency donor:non-fullerene acceptor blends – resulting in photocurrent loss. To address these issues, a facile and effective approach is reported to improve the OSC performance through a two-component hole transport layer (HTL) consisting of a self-assembled monolayer of 2PACz ([2-(9H-Carbazol-9-yl)ethyl]phosphonic acid) and PEDOT:PSS. The power conversion efficiency (PCE) of 17.1% using devices with PEDOT:PSS HTL improved to 17.7% when the PEDOT:PSS/2PACz two-component HTL is used. The improved performance is attributed to the overlaid 2PACz layer preventing the formation of an intermixed p-doped PSS⁻ ion rich region (≈5–10 nm) at the bulk heterojunction-HTL contact interface, resulting in decreased recombination losses and improved stability. Moreover, the 2PACz monolayer is also found to reduce electrical shunts that ultimately yield improved performance in large area devices with PCE enhanced from 12.3% to 13.3% in 1 cm² cells.     

Spidermen Strategy for Stable 24% Efficiency Perovskite Solar Cells

The interface energetics-modification plays an important role in improving the power conversion efficiency (PCE) among the perovskite solar cells (PSCs). Considering the low carrier mobility caused by defects in PSCs, a double-layer modification engineering strategy is adopted to introduce the “spiderman” NOBF₄ (nitrosonium tetrafluoroborate) between tin dioxide (SnO₂ and perovskite layers. NO⁺, as the interfacial bonding layer, can passivate the oxygen vacancy in SnO₂, while BF₄⁻ can optimize the defects in the bulk of perovskite. This conclusion is confirmed by theoretical calculation and transmission electron microscopy (TEM). The synergistic effect of NO⁺ and BF₄⁻ distinctly heightens the carrier extraction efficiency, and the PCE of PSCs is 24.04% with a fill factor (FF) of 82.98% and long-term stability. This study underlines the effectiveness of multifunctional additives in improving interface contact and enhancing PCE of PSCs.     

一种基于Arnold置乱和DCT编码的无载体信息隐藏方法北大核心CSCD

近年来十分火热的搜索映射式无载体信息隐藏虽具有一定的鲁棒性,但其隐藏容量较低、传输负载大且算法复杂度高。针对以上问题,该文章提出一种基于Arnold置乱和离散余弦变换(discrete cosine transform,DCT)编码的无载体信息隐藏方法。该算法先对图片进行Arnold置乱,再对DCT后的低频系数进行编码,接着更换置乱参数来构建索引表。选择索引表中与秘密信息相同的编码值所对应的参数构建候选队列,最后筛选出鲁棒性强的参数作为密钥发送给接收方。实验结果表明,该方法与现有方法相比大大提高了嵌入容量,拥有更强的抗JPEG压缩性能。并且减少了传输负载,算法简捷,具有较强的应用价值。     

冠醚改性聚甲基硅氧烷液膜离子传输性能

合成了两种新型的冠醚改性聚甲基硅氧烷，研究了它们作为液膜离子传输载体对离子的传输性能，并考察了膜的稳定性。     

Surface recombination in breakdown time delay experiments: Effect of different cathode materials

The late afterglow in nitrogen with iron electrode is studied by the breakdown time delay method, i.e., by measuring the breakdown time delay t_d as a function of the afterglow time . It is proposed that the cause of the secondary electrons initiating the breakdown is the energy of the surface recombination of nitrogen atoms on the iron electrode. The gas-phase and macrokinetic diffusive models are used to describe the experimental breakdown time delay data. By fitting the theoretical curve to the experimental data: (1) it has been confirmed that the recombination on the molybdenum glass is of the second order and the value of the surface recombination coefficient is determined at 4 mbar; (2) it has been shown that the surface recombination on the iron electrode is of the second order, and the effective recombination coefficients are determined; (3) the analytical form of the recombination coefficient as a function of the adsorption characteristics of surfaces and the pressure of the parent gas has been derived. In addition, the orders of surface recombination on the molybdenum-, aluminum-, and gold-plated electrode were determined by the same method.     

Enhancement of photocurrent generation by honeycomb structures in organic thin films.

A light-emitting poly (distyryldimethylbenzene-co-triethylene glycol) rod-coil block copolymer was used to fabricate films with three-dimensionally ordered honeycomb structures by the breath-figure method. Photocurrent generation and photovoltaic performance are studied, and the dependence of photocurrent on applied electric field is investigated. Introducing the ordered porous structure significantly improves the photoelectric conversion behavior, because porous structures not only enhance the light-harvesting efficiency but also benefit charge separation and charge transfer. This phenomenon may have great prospects for enhancing the photovoltaic behavior of organic thin-film devices.     

A modified simplex method for multifactor optimization of selectivity in gas chromatography

A computer-assisted advanced simplex method is presented for the simultaneous optimization of multifactor ( stationary phase loading, carrier gas flow rate and column temperature ) for separation of ten compounds in gas chromatography. A three factors factorial design was used. The method was based on a special polynomial established from fifteen preliminary runs, using resolution as the selection criterion, with connection to a general simplex method. Excellent agreement is found between the predicted data and the experimental results, and most of experiments required in the general simplex method can be omitted.     

Dependence of the relative retention of organic compounds on the nature and pressure of the carrier gas and on the thickness of the PEG-20M film in the capillary column

The effects of the carrier gas nature and pressure on the relative retention values of organic compounds were studied using a series of capillary columns differing in the film thickness of the polar stationary phase (PEG-20M). Relative retention depends linearly on the carrier gas pressure. This dependence becomes more pronounced in the following order of carrier gases: helium < nitrogen < carbon dioxide. The limiting relative retention at a carrier gas pressure approaching zero rather than relative retention values measured experimentally (relative retention time, Kovats retention index,etc.) is an invariant characteristic of a compound subjected to chromatography. For the carrier gases studied, the limiting retention values almost does not depend on the nature of the carrier gas used. The limiting indicating the complex absorption-adsorption nature of these parameters. Dissolution of a carrier gas in the stationary liquid phase has an effect on the relative retention. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2177–2186, December, 1997.