Selective Determination of Quercetin Using Carbon Nanotube‐Modified Electrodes

Electrochemical detection of quercetin has been carried out on glassy carbon electrodes modified with carbon nanotubes and Nafion (GC/Nafion‐CNT). GC/Nafion‐CNT electrodes did not show passivation effect that occurs on the unmodified electrodes and displayed better stability and reproducibility. Quercetin oxidation was most favorable in acidic conditions and current gradually decreased as the solution pH increased. No oxidation was observed when two ? OH groups in a catechol moiety were fully deprotonated. These electrodes enabled selective determination of quercetin in the presence of interfering species such as ascorbic acid, uric acid, glucose, and catechol in large excess. Quantification of quercetin in a yellow onion has been made and favorably compared with reported values. Good selectivity and high sensitivity obtained by Osteryoung sSquare‐wave voltammetry can open new possibilities of direct quercetin determination in vegetables with a minimal sample treatment.     

Catalytic oxidation of CO,hydrocarbons, and ethyl acetate over perovskite-type complex oxides

The catalytic activity of M^IM^IIO₃] perovskite-type complex oxides (M^I = La, Y, Nd, Yb; M^II = Co, Mn, Ni) in the oxidation of CO, propylene, benzene, ethylbenzene,o-xylene, and ethyl acetate was investigated. The Co-containing catalysts were shown to be more active in the oxidation than the Mn-containing catalysts. A relationship between the catalytic and adsorption properties was established.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 602–605, April, 1994.     

Mechanistic Aspects of Carbon Nanotube Nucleation and Growth

The discovery, synthesis, characterization, and applicability of carbon nanotubes have produced tremendous excitement and interest among scientists and engineers. In particular, the use of these unique tubular nanostructures for new strong lightweight materials, nanoelectronics, fuel storage and cells, electron emitters and bio, scanning probe microscopy, and chemical sensing devices has created an intense effort to advance the synthesis so as to mass produce carbon nanotubes with control over diameter and helicity. The massive and controlled synthesis of this heralded nanostructure has been a great challenge. Although significant progress has advanced the preparation, more synthetic development is required. The syntheses have so far involved three main approaches: arc discharge vaporization, laser vaporization, and catalytic chemical vapor deposition. The synthetic trend has progressed to a point where further advancement with these techniques will require a better understanding of the mechanism of nucleation and growth. The mechanics of carbon nanotube nucleation and growth involve very complex and diverse phenomena occurring under extreme conditions and on the mesoscopic scale. As yet the detail mechanism is unknown. Difficulties with experimental probing and computational simulation have increased the mystery of this mechanism. This review presents an account of research on the synthesis of carbon nanotubes and the mechanism of formation. This overview includes all three mentioned synthetic approaches and hybrids thereof. On the basis of this broad account a comprehensive mechanism for carbon nanotube nucleation and growth naturally arises. This mechanism is qualitative and it hopes to inspire more quantitative exploration and synthetic advancement.     

Anodic stripping voltammetry of sulphide at a nickel film: towards the development of a reagentless sensor

The determination of sulphide at an electrochemically generated nickel oxide layer at glassy carbon and screen-printed electrodes in acidic media has been examined and appraised. The NiO layer was found to produce a stripping-like signal to sulphide and gave a linear peak current response from 20 to 90 μM. The response was further enhanced by repetitive cycling allowing accumulation of nickel sulphide at the electrode surface such that lower micromolar levels of sulphide (i.e. 5 μM) can be determined. The response at the NiO layer to sulphide is shown to be reproducible over a period of 24 h, thereby offering the development of a disposable amperometric sensor for sulphide.     

Optimisation of Supercritical Carbon Dioxide Systems for Complexation of Naproxen : Beta-Cyclodextrin

Supercritical carbon dioxide (scCO₂)offers several attractive scenarios for thepharmaceutical processing as an alternativeto aqueous and organic solvents. In thiswork naproxen, a widely used non steroidalanti-inflammatory drug with analgesic andanti-inflammatory properties, was chosenas a model drug. Its complexation with cyclodextrinsimproves the rate and extent of dissolutionof the drug, increase its rate of absorption and mayreduce the unpleasant side-effects of the drug.The interest in using this supercritical technologyled us to develop an experimental unit for the useof supercritical CO₂ as a processing medium forthe complexation of naproxen with beta cyclodextrin (CD).     

Measurement of the sign and the magnitude of heteronuclear coupling constants from spin-state-edited J-cross-polarization NMR experiments

New spin-state-selective (S3) NMR pulse sequences exclusively applying cross-polarization schemes to achieve optimum homonuclear and heteronuclear 1H-X coherence transfer are reported for the simple and accurate measurement of the magnitude and sign of heteronuclear coupling constants for samples at natural abundance. The proposed spin-edited HCP-TOCSY experiments are based on clean heteronuclear S3 excitation, generated by simultaneous co-addition of two independent in-phase and anti-phase components created during the mixing heteronuclear J-cross-polarization (HCP) step, which is finally transferred to other protons by a conventional homonuclear TOCSY mechanism. Selective 1D and non-selective 2D approaches for the easy determination of long-range proton-carbon and proton-nitrogen coupling constants on any protonated and non-protonated heteronuclei are presented and discussed for several organic molecules.     

Asymmetric polymerization using C1 resources

Two examples of asymmetric alternating copolymerization, (1) the alternating copolymerization of α‐olefins (monosubstituted ethenes) with carbon monoxide and (2) the alternating copolymerization of meso‐epoxide with carbon dioxide, are described, and the meaning of chirality in polymer synthesis is emphasized. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 215–221, 2004     

炼铝用碳阳极中碱金属氧化物作用机理的量子化学研究

本文应用CNDO/2法研究了炼铝用碳阳极中添加碱金属氧化物的吸附行为, 通过优化得到了吸附的最佳模型, 考察了吸附结合能随分子间距的变化, 进而给出了碱金属氧化物在碳阳极中作用的机理。量子化学计算结果表明: 碱金属氧化物添加到炼铝用碳阳极中起传输电子的电桥作用, 是碳阳极在空气中氧化反应以及铝电解时生成氧气的氧化反应的催化剂; 理论计算和实验结果二者吻合较好, 可以用来解释若干实验结果。     

Competitive adsorption and desorption of a bi-solute mixture: effect of activated carbon type

This study aims to clarify the effects of carbon activation type and physical form on the extent of adsorption capacity and desorption capacity of a bi-solute mixture of phenol and 2-chlorophenol (2-CP). For this purpose, two different PACs; thermally activated Norit SA4 and chemically activated Norit CA1, and their granular countertypes with similar physical characteristics, thermally activated Norit PKDA and chemically activated Norit CAgran, were used. The thermally activated carbons were better adsorbers for phenol and 2-CP compared with chemically activated carbons, but adsorption was more reversible in the latter case. 2-CP was adsorbed preferentially by each type of activated carbon, but adsorption of phenol was strongly suppressed in the presence of 2-CP. The simplified ideal adsorbed solution (SIAS) model underestimated the 2-CP loadings and overestimated the phenol loadings. However, the improved and modified forms of the SIAS model could better predict the competitive adsorption. The type of carbon activation was decisive in the application of these models. For each activated carbon type, phenol was desorbed more readily in the bi-solute case, but desorption of 2-CP was less compared with single-solute. This was attributed to higher energies of 2-CP adsorption.     

STUDIES ON THE PREPARATION OF ZINC-CONTAINING ACTIVATED CARBON FIBERS AND THEIR ANTIBACTERIAL ACTIVITY

1. INTRODUCTION Microbial pollution will bring about various problems in industry and other vital fields, such as causing decomposing of materials, harming people抯 health. In order to reduce these problems, new antibacterial materials have been demanded. Recently, much attention has been paid to inorganic materials including zinc oxide [1~4]. These inorganic antibacterial materials are now substituting for organic materials to avoid releasing noxious organic molecules harmful to humans;…