隐丹参酮的电化学行为及其测定

采用循环伏安法研究隐丹参酮在电极上的电化学行为及建立差示脉冲伏安对其测定的新方法。在pH 4.0乙酸盐缓冲液中,氧化峰电流与隐丹参酮浓度在3.0×10-8~2.0×10-7mol/L范围内呈良好的线性关系,检出限为2.0×10-9mol/L。玻碳电极可有效消除样品中其它组分对隐丹参酮测定的干扰,已用于实际样品中隐丹参酮的直接测定。该方法灵敏度高、检测范围宽。     

室温下镀钯多壁碳纳米管对苯的气敏响应特性

在酸氧化后的多壁碳纳米管上化学还原镀钯,用水将镀钯后的碳管清洗至中性并配制成悬浊液,将悬浊液旋涂在真空溅射的叉指金电极表面,干燥后作为气敏膜,把气敏膜暴露于一定浓度的苯气体中,检测传感器的电流变化,并计算其灵敏度。镀钯后的多壁碳管在室温下对苯响应和回复迅速,电导变化与苯气体的浓度呈良好的线性关系,其线性回归方程y=0.0041x 0.1288,r=0.9546。Pd颗粒对苯分子和碳管壁结构缺陷间的电子转移的促进作用可能是多壁碳管镀钯后产生良好气敏响应的原因。     

大气气溶胶中有机碳和元素碳监测方法的进展

本文主要介绍和评述了近10年来大气气溶胶中的有机碳和元素碳的采样和分析技术的进展,引用参考文献41篇。     

低压供热涂层材料制备及热性能研究

低压供热技术具有安全系数高和节能降耗等优势,因而成为石化稠油长输管线、风力发电叶片冬季防覆冰和室内供暖等领域的研究热点之一。本文制备了一系列低压供热涂层材料,研究不同碳功能填料对涂层发热速率、发热功率及最高发热温度的影响规律,并揭示石墨烯和碳纤维对提升涂层材料热性能的协同作用。其中石墨烯纳米片的还原程度对材料热性能具有重要影响,降低其表面官能团密度对提升涂层供热特性具有促进作用,但是官能团密度过低会导致石墨烯纳米片的团聚现象,引起涂层发热不均匀。加入适量碳纤维可以提高石墨烯的均匀分散性,提升发热速率。优化石墨烯纳米片和碳纤维的比例后,采用24V电压驱动时,涂层材料的发热速率达到7.1℃·s^-1,功率密度为800W·m^-2,最高发热温度为124℃。     

Ultrathin MnO2 nanosheets grown on hollow carbon spheres with enhanced capacitive performance

Ultrathin MnO₂ nanosheets grown on the surface of hollow carbon spheres (MnO₂/HCSs) were fabricated by the redox reaction between carbon spheres with KMnO₄ in aqueous solution. Due to the porous structure and large amounts of active sites, MnO₂/HCSs exhibit excellent capacitive performance with 227.5 F g⁻¹ at 1 A g⁻¹. After 5000 cycles, the capacity retention of MnO₂/HCSs remains 96%, indicating its good cycling stability. These results demonstrate that MnO₂/HCSs are promising supercapacitor electrode material and this work provide a facile method for growth of ultrathin MnO₂ nanosheets on carbon substrate.     

Carbon Encapsulation of High Entropy Alloy Nanoparticles with Extraordinary Coercivity and Saturation at Room Temperature

Owing to their unique properties and technological potential, high entropy alloys (HEAs) have become the subject of great interest in the materials science community. HEAs consist of more than four principle elements in equimolar ratio so their configurational entropy is intrinsically greater than one-principle element based. The increasing surface energy and chemical tendency toward clustering of like atoms at low dimension, however, make production of HEA-nanoparticles (HEA-NPs) extremely difficult. A facile production of HEA-NPs inside carbon nanotubes and nanoparticles is demonstrated in this work. Electron microscopic and elemental analyses confirm encapsulated to be solution phase; some embrace carbides and form multidomains with chemical composition ranging from quaternary to quinary phase. Multidomains and nonmagnetic centers create hardening thus promoting coercivity significantly at room temperature. Alloying induces electron redistribution into high spin states, accounting for observed high saturation. Configurational entropy of encapsulated HEA-NPs lies on a range comparable with bulk.     

烧结烟气脱硫脱硝用活性炭混合钢渣复合材料的光谱学分析

钢渣是冶金工业中产生的主要固体废弃物,其产量约为每年粗钢产量的15%~20%。由于技术的局限,导致我国钢渣利用率较低,仅为年钢渣产量的10%,同时加之管理制度的不健全,导致钢渣大量露天堆放,对土地资源、地下水源,以及空气质量形成严重影响。固体废弃物再利用是资源可持续发展的重要途径之一,钢渣的主要化学成分为CaO, SiO2, Al2O3, MgO, Fe2O3, MnO, f-CaO等。面对上述问题,利用冶金固体废弃物与活性炭开发一种价格低廉且性能优越的活性炭混合钢渣复合材料,既是冶金固体废弃物的高附加值利用与资源可持续发展的重要途径之一,也是大幅降低改性活性炭生产成本与提高经济效益的重要途径之一。该研究创新性以活性炭与钢渣为研究对象,利用钢渣中含有的金属氧化物对活性炭进行改性处理制备用于烧结烟气脱硫脱硝的活性炭混合钢渣复合材料,通过搭建实验反应装置对活性炭混合钢渣复合材料的脱硫脱硝性能进行测试。利用X射线荧光光谱仪(XRF)对钢渣的化学成分进行测试与分析,比表面积及孔径测定仪(BET)对活性炭混合钢渣复合材料的孔结构进行测试与分析,傅里叶变换红外光谱仪(FTIR)对钢渣的结构组成进行测试与分析,扫描电子显微镜(SEM)对活性炭混合钢渣复合材料的微观结构进行测试与分析,以揭示活性炭与钢渣制备活性炭混合钢渣复合材料的机理,以及活性炭混合钢渣复合材料对烧结烟气脱硫脱硝的机理。结果表明:当钢渣为电炉热泼渣、钢渣与活性炭质量比为2∶4、钢渣与活性炭细度为400目时,活性炭混合钢渣复合材料具有良好的脱硫脱硝性能与合理的经济性,即脱硫效率为100%、脱硝效率为58%。活性炭混合钢渣复合材料具有的多孔结构对SO2和NO进行有作用,钢渣中Fe2O3与MnO2促使活性炭官能团进行催化还原反应提高脱硫脱硝性能,其中吸附作用是主导与前提,催化还原反应是辅助与协同。以期为高附加值的钢渣利用提供新途径,实现钢铁企业以废治废、以废增效的目的。     

Ultrasonically assisted synthesis of barium stannate incorporated graphitic carbon nitride nanocomposite and its analytical performance in electrochemical sensing of 4-nitrophenol

We describe the ultrasonic assisted preparation of barium stannate-graphitic carbon nitride nanocomposite (BSO-gCN) by a simple method and its application in electrochemical detection of 4-nitrophenol via electro-oxidation. A bath type ultrasonic cleaner with ultrasonic power and ultrasonic frequency of 100 W and 50 Hz, respectively, was used for the synthesis of BSO-gCN nanocomposite material. The prepared BSO-gCN nanocomposite was characterized by employing several spectroscopic and microscopic techniques such as X-ray diffraction, X-ray photoelectron spectroscopy, fourier transform infra-red, field emission scanning electron microscopy, and high resolution transmission electron microscopy, to unravel the structural and electronic features of the prepared nanocomposite. The BSO-gCN was drop-casted on a pre-treated glassy carbon electrode (GCE), and their sensor electrode was utilized for electrochemical sensing of 4-nitrophenol (4-NP). The BSO-gCN modified GCE exhibited better electrochemical sensing behavior than the bare GCE and other investigated electrodes. The electroanalytical parameters such as charge transfer coefficient (α = 0.5), the rate constant for electron transfer (k_s = 1.16 s⁻¹) and number of electron transferred were calculated. Linear sweep voltammetry (LSV) exhibited increase in peak current linearly with 4-NP concentration in the range between 1.6 and 50 μM. The lowest detection limit (LoD) was calculated to be 1 μM and sensitivity of 0.81 μA μM⁻¹ cm⁻²_. A 100-fold excess of various ions, such as Ca²⁺, Na⁺, K⁺, Cl⁻, I⁻, CO₃²⁻, NO₃, NH₄⁺ and SO₄²⁻ did not able to interfere with the determination of 4-NP and high sensitivity for detecting 4-NP in real samples was achieved. This newly developed BSO-gCN could be a potential candidate for electrochemical sensor applications.     

Strongly localized states in a single carbon nanotube with polymer molecules

A single-walled carbon nanotube (SWCNT) with conjugated polymer molecules is analyzed via optical spectroscopy. The presence of strongly localized excitonic states in the SWCNT is confirmed using time-integrated photoluminescence (PL). The PL spectrum exhibits extremely narrow width (~0.8 meV) which is attributed to the strong confinement of the states by polymer molecules. In addition, I observed that the excited states are gradually filled as a function of the excitation power, which supports the localized excitonic behavior. Only the ground excitonic state is observed at low excitation powers, but three additional PL peaks appear as the excitation power is increased. Especially, the power-dependent PL spectrum shows a blueshift and increased width, which can be elucidated in terms of quantum confined stark effect and the screening of induced electric fields. Overall, I demonstrate that the presence of polymer molecules induces several localized states in a single SWCNT.     

The recent progress of functionally graded CNT reinforced composites and structures

In the last decade,the functionally graded carbon nanotube reinforced composites(FG-CNTRCs)have attracted considerable interest due to their excellent mechanical properties,and the structures made of FG-CNTRCs have found broad potential applications in aerospace,civil and ocean engineering,automotive industry,and smart structures.Here we review the literature regarding the mechanical analysis of bulk CNTR nanocomposites and FG-CNTRC structures,aiming to provide a clear picture of the mechanical modeling and properties of FG-CNTRCs as well as their composite structures.The review is organized as follows:(1)a brief introduction to the functionally graded materials(FGM),CNTRCs and FG-CNTRCs;(2)a literature review of the mechanical modeling methodologies and properties of bulk CNTRCs;(3)a detailed discussion on the mechanical behaviors of FG-CNTRCs;and(4)conclusions together with a suggestion of future research trends.