Validation of an analytical method to determine trace metal impurities in fluoride compounds by flame atomic absorption spectroscopy

 The development of an analytical method for the determination of some heavy metals (Fe, Cu, Co, Zn and Ni) in fluoride compounds [Cu(BF₄)₂, Sn(BF₄)₂, Pb(BF₄)₂ and HBF₄] by flame atomic absorption spectroscopy is described. This method is to be used as a routine analytical method in an industrial quality control laboratory. To this end the "performance characteristics" of an instrumental analytical method such as matrix effects, sensitivity, linearity, detection and quantitation limits, precision and accuracy were evaluated for every system under study. The results of these investigations showed that non-spectral interferences (due to the presence of large concentrations of major metals such as Cu, Sn and Pb) were observed. Nevertheless it was possible to define a matrix concentration interval where matrix effects were not statistically significant, and therefore a direct calibration approach could be used as the calibration tool whenever the major metal concentration was not higher than 40×10^–3 kg l^–1. A guide to the developement of an analytical method for trace metal determination is provided. General tools for quality control have been used in order to show how an analytical method can be tested daily and evaluated in a convenient manner. Received: 29 January 1997 Accepted: 11 March 1997     

Analysis of Mercury in Skin Lightening Cream by Microwave Plasma Atomic Emission Spectroscopy (MP-AES)

This research aimed at developing an analysis method, which was optimized and validated to determine the content of mercury in skin lightening cream discovered in the market in Bandar Lampung, Indonesia, through the use of microwave plasma atomic emission spectroscopy (MP-AES). The optimization on the analysis method was conducted on pump rate, viewing position, and reductant concentration in order to obtain the highest mercury emission intensity, while the solution stability was optimized to know the stability of mercury in the solution. The result showed that the method developed had precision with a relative standard deviation of 2.67%, recovery value of 92.78%, and linearity with an r value of 0.993, respectively. The sensitivity of the instrument detection had a limit of analysis method detection and quantification of 0.59 and 1.98 µg/L, respectively. The results of the test of the lightening cream (8 of 16 samples) positively contained mercury in the range of 422.61–44,960.79 ng/g. Therefore the method of analysis developed may be used for routine analysis of chemicals in any cosmetics products.     

Developmental validation of the Yfiler Platinum PCR Amplification Kit for forensic genetic caseworks and databases

Y chromosome kits are successfully applied in cases where human biological material exists. With the development of genotyping ability, more Y chromosomal markers are needed for finer identification of male individuals and lineages. In this study, a developmental validation of a newly emerged Y chromosome kit that combines two different kinds of markers: 38 Y-STRs and 3 Y-indels are conducted. The results show that this kit has high sensitivity when there is a small amount of DNA (125 pg), more than one male (minor:major = 1:7), or a mixture of males and females (male:female = 125pg:1875pg), inhibited substances (800 μM hematin and more than 1600 ng/μL humic acid). The kit exhibits high precision level with a standard deviation of allele size no more than 0.14 nt. Locus DYS481 shows the largest stutter rate, with three stutters per true allele. Population samples are well identified (MP of 0.001106), and mutations can be observed in father–son pairs (46 mutations in 70 pairs, 10 in locus DYS627). Out of all the population samples, 13.2% belong to haplogroup M117-O2a2b1a1, with their ethnic group being Han Chinese. The results show that this kit can improve the performance of identifying male individuals, obtaining more unique haplotypes (increasing from 894 to 918 of 1000 male samples) and higher discrimination capacity (increasing from 0.942 to 0.955) in this study compared to previous widely used Yfiler Plus kit. Besides, it gives information about their paternal lineages in forensic genetic casework and genealogical database construction.     

多元分辨校正模型与方法研究—无机多组份分析

系统研究了各种多元分辨校正模型、方法及其应用，以模拟体系、病态体系有态体系为对象，考察了它们的多元校正能力与多元分辨效果，给我机多组份分析态体系实例。     

化学测量仪器检定/校准有关问题的探讨

介绍了化学测量仪器的分类、特点、检定/校准的必要性及化学计量检定/校准的现状,分析了化学计量标准的特点,探讨了化学计量最高标准的划定和考核的有关问题。     

药物分析中薄层色谱的方法认证

在药物分析中,针对所要求的性能参数,对一个薄层色谱程序的各个环节必须进行的认证方法和认可标准进行了讨论。建议当提出结果报告时,应附上关于对方法的认证参数和认证方法的说明。     

Using Design of Experiments to Optimize a Screening Analytical Methodology Based on Solid-Phase Microextraction/Gas Chromatography for the Determination of Volatile Methylsiloxanes in Water

Volatile methylsiloxanes (VMSs) constitute a group of compounds used in a great variety of products, particularly personal care products. Due to their massive use, they are continually discharged into wastewater treatment plants and are increasingly being detected in wastewater and in the environment at low concentrations. The aim of this work was to develop and validate a fast and reliable methodology to screen seven VMSs in water samples, by headspace solid-phase microextraction (HS-SPME) followed by gas chromatography with flame ionization detection (GC-FID). The influence of several factors affecting the extraction efficiency was investigated using a design of experiments approach. The main factors were selected (fiber type, sample volume, ionic strength, extraction and desorption time, extraction and desorption temperature) and optimized, employing a central composite design. The optimal conditions were: 65 µm PDMS/Divinylbenzene fiber, 10 mL sample, 19.5% NaCl, 39 min extraction time, 10 min desorption time, and 33 °C and 240 °C as extraction and desorption temperature, respectively. The methodology was successfully validated, showing low detection limits (up to 24 ng/L), good precision (relative standard deviations below 15%), and accuracy ranging from 62% to 104% in wastewater, tap, and river water samples.     

Development and Validation of Liquid Chromatography-Tandem Mass Spectrometry Methods for the Quantification of Cefquinome,Ceftiofur, and Desfuroylceftiofuracetamide in Porcine Feces with Emphasis on Analyte Stability

Cefquinome and ceftiofur are β-lactam antibiotics used for the treatment of bacterial infections in swine. Although these antimicrobials are administered intramuscularly, the exposure of the gut microbiota to these cephalosporins is not well described. This exposure can contribute to the emergence and spread of antimicrobials in the environment and to the possible spread of antimicrobial resistance genes. To assess the impact of drug administration on the intestinal excretion of these antimicrobials it is essential to measure the amounts of native compound and metabolites in feces. Two (ultra)-high-performance liquid chromatography-tandem mass spectrometry ((U)HPLC–MS/MS) methods were developed and validated, one for the determination of cefquinome and ceftiofur and the other for the determination of ceftiofur residues, measured as desfuroylceftiofuracetamide, in porcine feces. The matrix-based calibration curve was linear from 5 ng g⁻¹ to 1000 ng g⁻¹ for cefquinome (correlation coefficient (r) = 0.9990 ± 0.0007; goodness of fit (gof) = 3.70 ± 1.43) and ceftiofur (r = 0.9979 ± 0.0009; gof = 5.51 ± 1.14) and quadratic from 30 ng g⁻¹ to 2000 ng g⁻¹ for desfuroylceftiofuracetamide (r = 0.9960 ± 0.0020; gof = 7.31 ± 1.76). The within-day and between-day precision and accuracy fell within the specified ranges. Since β-lactam antibiotics are known to be unstable in feces, additional experiments were conducted to adjust the sampling protocol in order to minimize the impact of the matrix constituents on the stability of the analytes. Immediately after sampling, 500 µL of an 8 µg mL⁻¹ tazobactam solution in water was added to 0.5 g feces, to reduce the degradation in matrix.     

Development and Validation of QuEChERS Followed by UHPLC-ToF-MS Method for Determination of Multi-Mycotoxins in Pistachio Nuts

Pistachios are one of the types of tree nut fruits with the highest mycotoxin contamination, especially of aflatoxins, worldwide. This study developed a Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) method that was followed by Ultra-High Performance Liquid Chromatography combined with Time-of-Flight Mass Spectrometry (UHPLC–ToF-MS) for the determination of mycotoxins in pistachios. Different approaches to dispersive solid phase extraction as a clean-up method for high lipid matrices were evaluated. For this, classic sorbents such as C18 (octadecyl-modified silica) and PSA (primary secondary amine), and new classes of sorbents, namely EMR-Lipid (enhanced matrix removal-lipid) and Z-Sep (modified silica gel with zirconium oxide), were used. The QuEChERS method, followed by Z-Sep d-SPE clean-up, provided the best analytical performance for aflatoxins (AFB1, AFB2, AFG1 and AFG2), ochratoxin A (OTA), zearalenone (ZEA), toxin T2 (T2) and toxin HT-2 (HT2) in pistachios. The method was validated in terms of linearity, sensitivity, repeatability, interday precision and recovery; it achieved good results according to criteria imposed by Commission Regulation (EC) no. 401/2006. The method was applied to real samples and the results show that pistachios that are available in Portuguese markets are safe from mycotoxins that are of concern to human health.