Coherent Vibrational Dynamics and High-resolution Nonlinear Spectroscopy： A Comparison with the Air/DMSO Liquid Interface

We present a comparative study on the C-H stretching vibrations at air/DMSO （dimethyl sulfoxide） interface with both the free-induction decay （FID） coherent vibrational dynamics and the sub-wavenumber high resolution sum-frequency generation vibrational spectroscopy measurements. In principle the frequency-domain and time-domain spectroscopic measurements should generate identical information for a given molecular system. However, when the molecular systems are with several coupled or overlapping vibrational modes, obtain- ing detailed spectroscopic and coherent dynamics information is not as straightforward and rather difficult from either the time-domain or the frequency domain measurements. For the case of air/DMSO interface that is with moderately complex vibrational spectra, we show that the frequency-domain measurement with sub-wavenumber high-resolution sum-frequency generation vibrational spectroscopy is probably more advantageous than the time- domain measurement in obtaining quantitative understanding of the structure and coherent dynamics of the molecular interface.     

Effect of TaNx on electrical and optical properties of annealed TaNx/Ag/TaNx films

As‐deposited Ag(10 nm)/glass films exhibited agglomerated nanocrystals with seemingly thick boundaries. Introduction of a TaN_x layer below the Ag films resulted in dense and smooth structures, with a resistance at least three times lower than that of Ag/glass. For TaN_x(10 nm)/Ag(10 nm)/TaN_x(10 nm)/glass multilayer films, Auger electron spectroscopy results indicate that TaN_x acts as an effective barrier restraining the diffusion of Ag. After annealing (up to 573 K), no outward diffusion of Ag through either TaN_x layer was seen. However, partial oxidation of the outermost TaN_x layer to form Ta₂O₅ was observed. The films showed promising optical properties with 73% transmittance in the visible region and ~15% average transmittance in the near‐infrared region. The optical data obtained here was in good agreement with simulated predictions. Copyright © 2013 John Wiley & Sons, Ltd.     

A Correlation of the Drag Force Coefficient on a Sphere with Interface Slip at Low and Intermediate Reynolds Numbers

The hydrodynamics of a sphere with interface slip has been numerically investigated for flows of Reynolds number ranging 0 < Re ≤ 75. A simple correlation of the drag force coefficient in the present of interface slip has been derived based on our numerical simulations. The correlation takes the slip coefficient and Reynolds number as two input parameters. By comparing results found in the literature, we believe that the present correlation is more accurate; it provides a source for future experiment study and for numerical simulations of large multi-particle system where the interface slip is important.     

Effect of Octadecanol on the Interfacial Dilational Properties of Surfactant/Polymer Systems

The effect of octadecanol on dilational properties of 4,5-diheptyl-2-propylbenzene sulfonate and partly hydrolyzed polyacrylamide at the decane-water interface has been examined by means of longitudinal method. The octadecanol plays different roles in influencing the structure of adsorbed layers at different bulk concentration. A small quantity of octadecanol may enhance the dilational modulus by forming densely packed mixed-adsorption layer with surfactant molecules through hydrophobic interaction, which leads to the increase of dilational modulus. However, due to the weakening of the “entanglement” among long alkyl chains in surfactant molecules by the intercalation of octadecanol, the superfluous addition of octadecanol could decrease the dilational modulus. In the case of polymer/octadecanol system, the addition of the polymer may enhance the dilational modulus due to the slow diffusion-exchange process of the polymer.     

Fusion Dynamics of Aqueous Glutamic Acid/Aminodecane/Ibuprofen Vesicles

Vesicles have been prepared at a constant molar ratio of L-glutamic acid/1-aminodecane/ibuprofen/H₂O. The fusion dynamics of the vesicles have been directly observed and followed by using optical microscopy and freeze fracture replication-electron microscopy technologies. With time increasing up to 25 minutes, the vesicles slowly fuse to form large stable vesicles. A membrane phase transition temperature is detected at 97°C.     

Stability of Water/Crude Oil Systems Correlated to the Physicochemical Properties of the Oil Phase

A characterization of 30 crude oils has been performed to determine the relative level of influence that individual parameters have over the overall stability of w/o emulsions. The crude oils have been analyzed with respect to bulk and interfacial properties and the characteristics of their w/o emulsions. The parameters include compositional properties, acidity, spectroscopic signatures in the infrared and near‐infrared region, density, viscosity, molecular weight, interfacial tension, dilational relaxation, droplet size distribution, and stability to gravitationally and electrically induced separation. As expected, a strong covariance between several physicochemical properties was found. Near‐infrared spectroscopy proved to be an effective tool for crude oil analysis. In particular, we have showed the importance of the hydrodynamic resistance to electrically‐induced separation (static) in heavy crude oil‐water emulsions. A rough estimate of the drag forces and dielectrophoretic forces seemed to capture the difference between the 30 crude oils. Given enough time, water‐in‐heavy oil emulsions could be destabilized even at very low electric field magnitude (d.c.). When droplets approach each other in an inhomogeneous electric field, strong dielectrophoretic forces disintegrate the films and result in coalescence. The relative contribution from film stability to the overall emulsion stability may therefore be very different in a gravitational field compared to that in an electrical field.     

Adsorption Mechanism of Comb Polymer Dispersants at the Cement/Water Interface

Comb polymers are commonly used as dispersants to stabilize highly concentrated cement suspensions. The effectiveness of such polymeric additives to stabilize these suspensions is determined to a large extent by the amount adsorbed. In this study we investigated the adsorption characteristics of various comb dispersant containing different graft densities on surfaces of cement particle. The effect of inorganic salts on their adsorption was also examined in order to elucidate their adsorption mechanism. The results show that the adsorption of comb polymer dispersants on cement surface conforms approximately to Langmuir's adsorption isotherm and the characteristic plateau A _s and adsorption free energy ΔG_ads are largely dependent on the anionic group content of the comb polymers. The A _s and ΔG_ads increase with increasing anionic group content. This information suggests that the adsorption of comb polymers on cement surfaces is dominated by electrostatic interaction between COO-groups on the comb polymers and the positive surface of the cement. This conclusion is supported by effects of inorganics such as calcium and sulfate ions, and diffuse reflectance FTIR spectroscopy. The implication of results for tuning polymers for the required performance in cement manufacture should be noted.     

基于嵌入式的工业控制人机界面系统研究

针对工业控制系统网络化和良好人机交互性的需求,构建和开发了基于ARM9微处理器的通用工业控制人机界面系统。硬件部分主要讨论了以S3C2440微处理器为核心的硬件电路设计,外围电路模块包括SDRAM及Flash存储器电路、以太网电路、RS-232/RS-422电路、触摸屏及LCD接口等电路,在分析了硬件系统信号完整性的前提下,完成了6层PCB的设计工作。软件部分主要研究了U-Boot移植和内核裁剪技术,编写了相关的硬件设备驱动程序,设计了基于QT/Embedded的人机界面和相关应用程序。论文研究最终实现了工业控制系统的人机交互和控制需求。     

Topologically protected interface mode in plasmonic waveguide arrays

Recent realization of nontrivial topological phases in photonic systems has provided unprecedented opportunities in steering light flow in novel manners. Based on the Su–Schriffer–Heeger (SSH) model, a topologically protected optical mode was successfully demonstrated in a plasmonic waveguide array with a kinked interface that exhibits a robust nonspreading feature. However, under the same excitation conditions, another antikinked structure seemingly cannot support such a topological interface mode, which appears to be inconsistent with the SSH model. Theoretical calculations are carried out based on the coupled‐mode theory, in which the mode properties, excitation conditions, and the robustness are studied in detail. It is revealed that under the exact eigenstate excitations, both kinked and antikinked structures do support such robust topological interface modes; however, for a realistic single‐waveguide input only the kinked structure does so. It is concluded that the symmetry of interface eigenmodes plays a crucial role, and the odd eigenmode in a kinked structure offers the capacity to excite the nonspreading interface mode in the realistic excitation of a one‐waveguide input. Our finding deepens the understanding of mode excitation and propagation in coupled waveguide systems, and could open a new avenue in optical simulations and photonic designs.

     

A Happy Get-Together – Probing Electrochemical Interfaces by Non-Linear Vibrational Spectroscopy

Electrochemical interfaces are key structures in energy storage and catalysis. Hence, a molecular understanding of the active sites at these interfaces, their solvation, the structure of adsorbates, and the formation of solid-electrolyte interfaces are crucial for an in-depth mechanistic understanding of their function. Vibrational sum-frequency generation (VSFG) spectroscopy has emerged as an operando spectroscopic technique to monitor complex electrochemical interfaces due to its intrinsic interface sensitivity and chemical specificity. Thus, this review discusses the happy get-together between VSFG spectroscopy and electrochemical interfaces. Methodological approaches for answering core issues associated with the behavior of adsorbates on electrodes, the structure of solvent adlayers, the transient formation of reaction intermediates, and the emergence of solid electrolyte interphase in battery research are assessed to provide a critical inventory of highly promising avenues to bring optical spectroscopy to use in modern material research in energy conversion and storage.