Rheological properties of network models with configuration-dependent creation and loss rates

A numerical stochastic approach allows the exact solution of the convection equation arising in network theories. We now want to show the flexibility and the limits of this approach by studying the rheological properties of different kinds of models.     

TNT炸药动静态变温三轴压缩力学性能的试验研究

介绍了一种高能材料动静态变温三轴压缩试验装置，在熔点以下温度，通过对国产单质炸药ＴＮＴ在中等应变速率（２－４／ｓ）及准静态（３×１０－３／ｓ）条件下三轴压缩力学性能的测试，得出ＴＮＴ的杨氏模量Ｅ、泊松比ν和屈服极限Ｙ，以及当加载速率和温度改变时这些参数的变化规律。并提出三轴应力状态下屈服极限的一种确定方法。该三轴压缩试验装置以及三轴压缩应力状态下力学参数的测试、分析、处理系统为研究高能材料力学性能提供了一套完整的技术和手段。     

Molecular dynamics simulation of crack-tip processes in copper

The crack tip processes in copper under mode II loading have been simulated by a molecular dynamics method. The nucleation, emission, dislocation free zone (DFZ) and pile-up of the dislocations are analyzed by using a suitable atom lattice configuration and Finnis & Sinclair potential. The simulated results show that the dislocation emitted always exhibits a dissociated fashion. The stress intensity factor for dislocation nucleation, DFZ and dissociated width of partial dislocations are strongly dependent on the loading rate. The stress distributions are in agreement with the elasticity solution before the dislocation emission, but are not in agreement after the emission. The dislocation can move at subsonic wave speed (less than the shear wave speed) or at transonic speed (greater than the shear wave speed but less than the longitudinal wave speed), but at the longitudinal wave speed the atom lattice breaks down. The project supported by the National Natural Science Foundation of China     

A study on the correlation between the thermal contact conductance and effective factors in fin–tube heat exchangers with 9.52 mm tube

The thermal contact resistance is a principal parameter interfering with heat transfer in a fin–tube heat exchanger. However, the thermal contact resistance in the interface between tubes and fins has not been clearly investigated. The objective of the present study is to examine the thermal contact conductance for various fin–tube heat exchangers with tube diameter of 9.52 mm and to find a correlation between the thermal contact conductance and effective factors such as expansion ratio, fin type, fin spacing and hydrophilic coating. In this study, experiments have been conducted only to measure heat transfer rate between hot and cold water. To minimize heat loss to the ambient air by the natural convection fin–tube heat exchangers have been placed in an insulated vacuum chamber. Also, a numerical scheme has been employed to calculate the thermal contact conductance with the experimental data. As a result, a new correlation including the influences of expansion ratio, slit of fin and fin coating has been introduced, and the portion of each thermal resistance has been estimated in the fin–tube heat exchangers with 9.52 mm tube.     

Dynamic compressive responses of intact and damaged ceramics from a single split Hopkinson pressure bar experiment

A novel dynamic compressive experimental technique has been developed based on a split Hopkinson pressure bar. This new method dynamically loads the ceramic specimen by two consecutive stress pulses. The first pulse determines the dynamic response of the intact ceramic materiaal and then crushes the specimen, and the second pulse determines the dynamic compressive constitutive behavior of the ceramic rubble. Precise pulse shaping ensures that the specimen deforms at nearly constant strain rates under dynamic stress equilibrium during the loading by both stress pulses. Pulse shaping also controls the amplitudes of loading pulses, the values of strain rates, the maximum strains in the rubble specimens, and the proper separation time between the two loading pulses. The feasibility of the new technique is demonstrated by the experimental results obtained on an AD995 alumina.     

Analytical solutions for cohesive zone models

Solutions are given for a cantilever beam specimen using a beam on elastic foundation model to incorporate various cohesive zone traction laws. These included both positive and negative linear slopes and constant stresses. Negative slopes give rise to multiple solutions. However, all the solutions give very similar results for energy release rate and beam root rotation confirming insensitivity to the form of the traction law. The use of these solutions to analyse peeling is discussed.     

复合材料层合板动态断裂韧性与损伤扩展的实验研究

研究了复合材料层合板在冲击载荷和不同温度条件下的力学行为及破坏机理。在不同温度环境下 ,利用MTS材料试验机 ,采用中等应变速率 (1/S) ,对玻璃布一环氧层板实施了冲击拉伸断裂实验 ,测试了该材料在不同温、不同应变速率下的断裂韧性值。分析了玻璃布 环氧层板材料的破坏过程及内部再伤情况     

35CrMo合金钢疲劳短裂纹扩展规律的试验研究

本文通过试验研究了35CrMo 合金钢三点弯曲试样疲劳短裂纹的扩展特性;用电测法得到了裂尖处的载荷—应变标定关系。试验结果表明,短裂纹的扩展速率正比于局部应力幅的幂次和裂纹长度,即 da/dN=A(?),可以较好地描述疲劳短裂纹的扩展规律。     

A Technique for Dynamic Tensile Testing of Human Cervical Spine Ligaments

An experimental study is undertaken to examine the dynamic stress–strain characteristics of ligaments from the human cervical spine (neck). Tests were conducted using a tensile split Hopkinson bar device and the engineering strain rates imposed were of the order of 10²∼10³/s. As ligaments are extremely soft and pliable, specialized test protocols applicable to Hopkinson bar testing were developed to facilitate acquisition of reliable and accurate data. Seven primary ligaments types from the cervical spines of three male cadavers were subjected to mechanical tests. These yielded dynamic stress–strain curves which could be approximated by empirical equations. The dynamic failure stress/load, failure stain/deformation, modulus/stiffness, as well as energy absorption capacity, were obtained for the various ligaments and classified according to their location, the strain rate imposed and the cadaveric source. Compared with static responses, the overall average dynamic stress–strain behavior foreach type of ligament exhibited an elevation in strength but reduced elongation.     

JP-10裂解的激波管实验与动力学模拟

利用单脉冲激波管对碳氢燃料JP-10在1150~1300K条件下的高温热裂解特性进行了实验研究,采用气相色谱法分析热裂解产物并获得了热裂解速率系数.主要裂解产物有乙烯、乙炔、丙烯、丁烯、1,3-丁二烯、环戊二烯、环戊烯、苯、甲苯,以及少量的甲烷、乙烷、二甲苯和甲基环戊烯.将每次激波管实验后所有产物浓度累加, JP-10裂解速率系数由实验测定.为了消除激波运行中非理想性和边界层效应导致反应温度确定的误差,采用对比速率法确定裂解温度,即在反应物中加入少量热解速率已知的内标物,根据内标物在相同的激波管实验条件下的裂解程度确定反应温度.根据内标物裂解量确定的激波管裂解反应温度通常小于采用传统测量激波速度由激波关系计算的反射激波后5区温度.在1200~1300K之间两种方法得到的温度吻合得较好,差异在20K以内,随着温度升高,两者差异增大.在实验研究的基础上,依据San Diego Mechanism对JP-10高温裂解过程进行了动力学模拟.结果显示:主要裂解产物中乙烯、乙炔和1,3-丁二烯产量随温度变化的实验值与San Diego Mechanism的模拟结果有很好的一致性,但环戊烯产量的实验值比模拟值高很多,预示JP-10裂解中完全开环和部分开环反应都是重要的裂解通道.