化学沉镍金速率分析与应用

通过试验分析,得出了温度、pH、浓度与化学镍、化学金析出速率的关系,为精确控制化学镍、化学金的镀层厚度、降低化金成本提供了依据。     

High strain rate sensitivity of hardness in quinary Ti-Zr-Hf-Cu-Ni high entropy metallic glass thin films

Quinary Ti-Zr-Hf-Cu-Ni high-entropy metallic glass thin films were produced by magnetron sputter deposition. Nanoindentation tests indicate that the deposited film exhibits a relatively large hardness of 10.4±0.6 GPa and a high elastic modulus of 131±11 GPa under the strain rate of 0.5 s⁻¹. Specifically, the strain rate sensitivity of hardness measured for the thin film is 0.05, the highest value reported for metallic glasses so far. Such high strain rate sensitivity of hardness is likely due to the high-entropy effect which stabilizes the amorphous structure with enhanced homogeneity.     

Swelling of metallic surfaces irradiated by helium ions

At doses close to threshold for exfoliation or bubble formation the surfaces have been investigated by SEM and, after isolation of surface layers, also by RBS. Swelling as a function of energy and material has been determined. The data are interpreted in the form of volume occupied by a helium atom. We find an indication for a volume decrease with increasing energy. A special example of blister formation is also discussed, where we find evidence for a non-uniform fracture plane.     

不同制式手机SAR值测试与分析

介绍了各种主流移动通信制式的手机样品抽样SAR值测试的情况,并对测试结果进行了分析和研究。     

DECAY RATE OF SAINT-VENANT END EFFECTS FOR PLANE DEFORMATIONS OF PIEZOELECTRIC-PIEZOMAGNETIC SANDWICH STRUCTURES

This paper is concerned with the decay of Saint-Venant end effects for plane deformations of piezoelectric （PE）-piezomagnetic （PM） sandwich structures, where a PM layer is located between two PE layers with the same material properties or reversely. The end of the sandwich structure is subjected to a set of self-equilibrated magneto-electro-elastic loads. The upper and lower surfaces of the sandwich structure axe mechanically free, electrically open or shorted as well as magnetically open or shorted. Firstly the constitutive equations of PE mate- rials and PM materials for plane strain are given and normalized. Secondly, the simplified state space approach is employed to arrange the constitutive equations into differential equations in a matrix form. Finally, by using the transfer matrix method, the characteristic equations for eigen- values or decay rates axe derived. Based on the obtained characteristic equations, the decay rates for the PE-PM-PE and PM-PE-PM sandwich structures are calculated. The influences of the electromagnetic boundary conditions, material properties of PE layers and volume fraction on the decay rates are discussed in detail.     

A Novel BIRA Method with High Repair Efficiency and Small Hardware Overhead

Built-in redundancy analysis (BIRA) is widely used to enhance the yield of embedded memories. In this letter, a new BIRA method for both high repair efficiency and small hardware overhead is presented. The proposed method performs redundancy analysis operations using the spare mapping registers with a covered fault list. Experimental results demonstrate the superiority of the proposed method compared to previous works.     

A Simplified Model for the Etch Rate of Novolac-Based Photoresist

The novolac-based resins used as positive-tone photoresists are frequently etched in an oxygen plasma. It is desirable to have a predictive model of the photoresist etch rate but, for process improvement, control, and analysis, the development of a rigorous mechanistic model is impractical. Instead, a simplified mechanistic model is derived, here, according to the method proposed by Hougen and Watson for the study of fluid–solid interactions. This model derivation method is employed in order to arrive at a functional form that represents chemical etching of the resist by oxygen radicals, assisted by the plasma ion flux. Values for model parameters are determined from process data by nonlinear regression. The quality of the model fit to the data is tested statistically.     

A Circuit Architecture for Analog On-Chip Back Propagation Learning with Local Learning Rate Adaptation

In this paper we present the analog CMOS architecture of a Multi Layer Perceptron network with on-chip stochastic Back Propagation learning. The learning algorithm is based on a local learning rate adaptation technique which makes the on-chip implementation more efficient (i.e. fast convergence speed) with respect to similar architectures presented in the literature. Circuit simulation results on the XOR learning problem validate the network behavior.     

Study of Proton Resonances in ~(22)Mg by Resonant Elastic Scattering of ~(21)Na+p and Its Astrophysical Implication in ~(18)Ne(α,p)~(21)Na Reaction Rate

Proton resonant states in ~(22)Mg have been investigated by the resonant elastic scattering of ~(21)Na+p.The ~(21)Na beam with a mean energy of 4.00 MeV/u was separated by the CNS radioactive ion beam separator(CRIB) and bombarded a thick(CH_2)_n target.The energy spectra of recoiled protons were measured at scattering angles of θ_(cm)～172° and 146°,respectively.A new state at 7.06 MeV has been observed clearly and another new one at 7.28 MeV is tentatively identified due to its low statistics.The proton resonant parameters were deduced from an R-matrix analysis of the differential cross section data.The astrophysical resonant reaction rate for the ~(18)Ne(α,p) ~(21)Na reaction has been estimated,and it is about five times larger than that assumed before.