聚氯乙烯结构缺陷和热不稳定性之间关系的研究 2.各种结构缺陷含量和热脱氯化氢速率之间的关系

本工作采用溴加成法、酚解法、FTIR法及臭氧裂解法分别测定了五种不饱和蒸气压下聚合的PVC样品(u-PVC)和五种商品PVC样品(s-PVC)的总双键、总不稳定氯、孤立双键和内部双键的含量.通过研究结构缺陷和PVC的平均分子量及脱HCl速率的相互关系,揭示了不饱和总双键值,总不稳定氯和孤立双键含量彼此的相关性是建立在它们分别与1/M_n的相关性基础之上,从而得出了这三种定量值测得的主要都是端基烯丙基氯结构.根据三者对脱HCl速率的良好线性相关性,首次提出了端基烯丙基氯结构在HCl催化作用下异构化成内部烯丙基氯从而成为脱HCl速率主要原因的机理.     

表面起伏光栅形成速率的影响规律 Ⅰ.偶氮生色团种类和官能度的影响

设计并合成了含有不同生色团以及不同官能度的环氧树脂基偶氮高分子 ,系统研究了偶氮生色团的种类和官能度对光栅形成速率的影响规律 .实验结果表明 ,偶氮苯对位是羧基的聚合物的光栅形成速率明显快于偶氮苯对位是硝基的聚合物 ,光栅形成速率随偶氮生色团官能度的增加而加快 .这两类聚合物都可以形成规整的可擦式表面起伏光栅     

Test of variational transition state theory with multidimensional tunneling contributions against experimental kinetic isotope effects for the CHnD4−n + OH→P (n=0, 4) reactions

 Variational transition state theory including tunneling corrections (as implemented in Polyrate 8.7) and using multilevel energy calculations at the MCCM-CCSD(T)-1sc level for the CH₄ + OH reaction and at the MCCM-CCSD(T)-2m level for the CD₄ + OH process, reproduces very well the experimental rate constants. However, no single methodology was found that reproduces equally well the experimental rate constants for both title reactions. Received: 24 March 2002 / Accepted: 11 April 2002 / Published online: 4 July 2002     

A novel zirconocene/ultradispersed diamond black powder supported catalytic system for ethylene polymerization

A novel carrier of ultradispersed diamond black powder (UDDBP) was used to support metallocene catalyst. Al₂O₃ was also used as carrier in order to compare with UDDBP. Supported catalysts for ethylene polymerization were synthesized by two different reaction methods. One way was direct immobilization of the metallocene on the support, the other was adsorption of MAO onto the support followed by addition of the metallocene. Four supported catalysts Cp₂ZrCl₂/UDDBP, Cp₂ZrCl₂/Al₂O₃, Cp₂ZrCl₂/MAO/UDDBP and Cp₂ZrCl₂/Al₂O₃/MAO were obtained. The content of the zirconium in the supported catalyst was determined by UV spectroscopy. The activity of the ethylene polymerization catalyzed by supported catalyst was investigated. The influence of Al/Zr molar ratio and polymerization temperature on the activity was discussed. The polymerization rate was also observed.     

Spin-adducts of radicals ·P(O)(OPri)2 and ·CMe3 with pyrrolidino[60]fullerenes studied by ESR spectroscopy

The addition of the ^·Bu^t (R¹) and ^·P(O)(OPrⁱ)₂ (R²) radicals to pyrrolidino[60]fullerenes C₆₀CH₂NMeCHX (X = C₆H₄N(CH₂CH₂Cl)₂, 2,6-(Bu^t)₂C₆H₂OH, PhC₆H₄, and indol-3-yl) was studied by ESR spectroscopy. The rate constants of R¹ radical addition to these compounds and dimerization of spin-adducts of the R¹ radicals with pyrrolidino[60]fullerenes were determined. Pyrrolidino[60]fullerenes manifest considerably higher reactivity toward the R¹ radicals than fullerene C₆₀ and methanofullerenes C₆₀CX¹X² (X¹ = X² = CO₂Et; X¹ = CO₂Me, X² = OP(OMe)₂, X¹ = X² = OP(OEt)₂).     

Theoretical study of thermal decomposition of azomethane

Summary.  Thermal one- and two-bond dissociation processes of cis- and trans-azomethane were studied by ab initio computation with DZP and TZ2P basis sets, using the d(N–C) bond lengths as the reaction coordinates. The geometries were optimized at the MP2 level, and the dissociation energies obtained exploiting a single-point, fourth-order M?ller–Plesset calculations [MP4SDTQ/TZ2P]. At this level of theory including zero-point energies, the trans-isomer is by 9.3 kcal/mol more stable than the cis-isomer. The results show that the energetically more favourable one-bond cleavage proceeds without transition state with the predicted bond dissociation energy D ₀ of 47.8 kcal/mol for trans-azomethane and 38.5 kcal/mol for cis-azomethane. With calculated barrier heights the unimolecular dissociation rate constants have been determined by means of the RRKM theory. The second-order saddle points localized for synchronous decomposition pathways lie 13 (trans)-23(cis) kcal/mol above the one-bond dissociation energies [MP2/DZP]. Received May 28, 1996/Final version received November 1, 1996 / Accepted November 1, 1996     

Performance validation of step-isothermal calorimeters

Isothermal calorimetry is becoming indispensable as a tool for the study of a wide variety of systems. As with all scientific instruments it is essential that robust calibration routines be developed in order to validate the data obtained. Chemical test reactions offer many advantages over (the traditionally used) joule effect heating methods, not least because they have the potential to validate instrument performance (i.e. they can be used to assess all aspects of calorimeter operation). In this work the results of a validation exercise, conducted by Thermal Hazard Technology as part of an installation routine, using the base catalysed hydrolysis of methyl paraben are discussed. In the case described, a systematic misreporting of the reported temperature of a calorimeter was identified, caused by an upgrade to the calorimeter's firmware, a discrepancy which may not have been noted using traditional electrical calibration methods and one which highlights the importance of both manufacturers and end-users adopting chemical test reactions into their test and validation routines.     

席夫碱自组装单分子膜的电化学行为

利用自组装技术将席夫碱硫醇衍生物在金表面形成自组装单分子膜,并初步研究了此自组装单分子膜的电化学行为,发现该席夫碱分子在0.1 mol•L－1的KCl溶液中具有电化学不可逆氧化还原行为，且随着自组装时间的增加表观电极反应速率常数值显著减小,最后减小为0,并对此进行了解释.     

Electrochemical Impedance Analysis of Thermogalvanic Cells

Thermogalvanic cells(also known as thermo-electrochemical cells) that convert waste heat energy to electricity are a new type of energy conversion device. However, the electron transfer kinetics and mass transfer of redox couples have not been thoroughly studied. Here, the ion reaction and charge transport in thermogalvanic cells are investigated by electrochemical impedance analysis. We first propose the detailed impedance model followed experimental verification on three types of electrode materials. Parameters including kinetic rate constants and ion diffusion coefficients for the electrodes are obtained by fitting the impedance data. Our study shows explicitly that impedance analysis can provide useful information on selecting suitable electrode materials for thermogalvanic cells.     

Kinetics and mechanism in the decomposition of NH3 in a radio-frequency pulse discharge

Studies of time-resolved absorption spectra of transient species in the decomposition of NH₃ by an r.f. pulse discharge together with product analysis showed that the major radical formed was NH at concentrations of the order of 10^–6 mol dm^–3 (10⁵ molec. cm^–3). Possible mechanisms for the formation of the radical during the discharge and its decay following pulse cut-off were tested by computer simulation of the kinetic data. Following zero-order formation with rate coefficient 0.19±0.03 mol dm^–3 s^–1, the decay was second order in NH with rate coefficient 2.1±0.5×10⁹ mol^–1 dm³ s^–1 both for pure NH₃ and where NH₃/rare gas mixtures were investigated. The kinetic data are consistent with NH removal in a nonassociative radical-radical reaction proceeding via a short-lived collision complex, probably 2NH N₂H₂ N₂ + H₂.