A mixed hp FEM for the approximation of fourth‐order singularly perturbed problems on smooth domains

We consider fourth‐order singularly perturbed problems posed on smooth domains and the approximation of their solution by a mixed Finite Element Method on the so‐called Spectral Boundary Layer Mesh. We show that the method converges uniformly, with respect to the singular perturbation parameter, at an exponential rate when the error is measured in the energy norm. Numerical examples illustrate our theoretical findings.     

Comparative XPS study between experimentally and naturally weathered pyrites

A comparative study has been carried out between experimentally and naturally weathered pyrites. Both were found to share similar species of weathering products and a similar weathering mechanism. The weathering products could be divided into sulphur-bearing or iron-bearing groups. The sulphur-bearing group was comprised of sulphate, sulphite, thiosulphate, elemental sulphur, polysulphide, and mono-sulphide. The iron-bearing group was comprised of goethite, hematite or magnetite, and iron sulphate. The weathering structural profile was also similar for both types of weathering, being composed of a surficial layer and a transitional layer. The surficial layer was made up of both the sulphur-bearing and the iron-bearing products, while the transitional layer was comprised of goethite, and hematite or magnetite. The inward migration of the weathering interface was stimulated by the diffusion of oxygen and moisture. The oxygen was considered to preferably squeeze the iron to form goethite, and the ferric ions of goethite to have acted as a bridge for electron transfer between the oxygen and bulk S₂²⁻ and Fe²⁺ of pyrite.     

Adsorption of azacrown ethers at solid–liquid interface. Contact angle and neutron reflectivity study

Adsorption of two alkylated N,N′-diaza-18-crown-6 ethers (decyl- and hexadecyl-derivatives, ACE-10 and ACE-16, respectively) on solid surfaces was studied by using contact angle and neutron reflectivity measurements. The solid substrates used were (a) Si covered with a native oxide layer (Si/SiO₂) and (b) Si with sputtered Pt layer (Si/Pt). The sensitivity of neutron reflectivity was drastically improved by applying the intermediate Pt layer of 150 Å, which gave rise to several Kiessig fringes in the experimentally accessible q-range. The position of the fringes is very sensitive to slight changes of the interfacial composition induced by adsorption of a thin monolayer, otherwise very difficult to detect. Unfortunately, in the studied case this sensitivity is immediately lost due to undesired adsorption of a protonated material on the Pt surface exposed to the lab air. A decrease of surface energy (increase of contact angle) of both Si/SiO₂ and Si/Pt upon exposure to toluene solutions of ACEs suggests that the latter are attached to the surface via the hydrophilic azacrown ether head with alkyl chains standing upright towards the liquid phase.     

Cross‐linked Multilayer Polymer‐Clay Nanocomposites and Permeability Properties

Abstract

Electrostatically layered aluminosilicate nanocomposites have been prepared by the sequential deposition of poly(allylamine hydrochloride)/poly(acrylic acid)/poly(allylamine hydrochloride)/saponite (PAH/PAA/PAH/saponite)₁₀ on poly(ethylene terephtalate) (PET) film. Exfoliated saponite nanoplatelets were obtained by extensive shaking, sonication, and centrifugation of a water suspension. To minimize permeability and improve the mechanical integrity, cross‐linking of composite films was carried out at different temperatures. The formation of amide linkage induced through heating was observed by Fourier Transform Infrared (FT‐IR) and x‐ray photoelectron spectroscopy (XPS). The cross‐linking of nanocomposites (PAH/PAA/PAH/saponite)₁₀ showed 60% decrease in permeability of oxygen when compared with the pristine PET substrate film. In contrast, water permeability of the nanocomposite membrane was not affected by heating temperature and deposition cycles.     

Towards the performance evaluation of 4th generation wireless communication standards: LTE versus Mobile WiMAX

Advances in wireless communication protocols and networking toward support of the next generation of mobile and radio broadband technologies have contributed to a strong competition among various telecommunication standards in particular Long Term Evolution (LTE) and Mobile Worldwide Interoperability for Microwave Access (WiMAX). In this paper, we provide an in‐depth comparison analysis of LTE and Mobile WiMAX at the physical (PHY) layer by studying the most similar PHY configuration scenarios for these two technologies. Our study includes a throughput analysis of downlink (DL) and uplink (UL) transmissions in time division duplex with the least overhead possible and different antenna schemes as well as modulation and code rates. This study also performs an overhead analysis in both protocols to provide a more in‐depth understanding of the PHY layer capacity in various PHY layer configurations. Our simulation results generally show higher performance for LTE in both DL and UL transmission with 7 Mbps in DL and 5 Mbps in UL, when using one antenna port. However, by increasing the number of antennas for multiple‐input/multiple‐output configurations, the results illustrate a reduction in the performance of LTE compared to Mobile WiMAX. This arises from the increase in reference signal overhead in LTE from 4.7% in single‐input/single‐output (SISO) to 14.28% in 4 × 4 multiple‐input/multiple‐output (MIMO). Copyright © 2013 John Wiley & Sons, Ltd.     

Synergic Enhancement of High-density Polyethylene through Ultrahigh Molecular Weight Polyethylene and Multi-flow Vibration Injection Molding: A Facile Fabrication with Potential Industrial Prospects

General-purpose plastics with high strength and toughness have been in great demand for structural engineering applications. To achieve the reinforcement and broaden the application scope of high-density polyethylene(HDPE), multi-flow vibration injection molding(MFVIM) and ultrahigh molecular weight polyethylene(UHMWPE) are synergistically employed in this work. Herein, the MFVIM has better shear layer control ability and higher fabrication advantage for complex parts than other analogous novel injection molding technologies reported.The reinforcing effect of various filling times and UHMWPE contents as well as the corresponding microstructure evolution are investigated.When 5 wt% UHMWPE is added, MFVIM process with six flow times thickens the shear layer to the whole thickness. The tensile strength and modulus increase to 2.14 and 1.39 times, respectively, compared to neat HDPE on the premise of remaining 70% impact strength. Structural characterizations indicate that the enhancement is attributed to the improvement of shish-kebab content and lamellae compactness, as well as related to the corresponding size distributions of undissolved UHMWPE particles. This novel injection molding technology with great industrial prospects provides a facile and effective strategy to broaden the engineering applications of HDPE materials. Besides, excessive UHMWPE may impair the synergistic enhancement effect, which is also reasonably explained.     

Optimization of CdTe thin‐film solar cell efficiency using a sputtered,oxygenated CdS window layer

A major source of loss in cadmium sulfide/cadmium telluride (CdS/CdTe) solar cells results from light absorbed in the CdS window layer, which is not converted to electrical current. This film can be made more transparent by oxygen incorporation during sputter deposition at ambient temperature. Prior to this work, this material has not produced high‐efficiency devices on tin oxide‐coated soda‐lime‐glass substrates used industrially. Numerous devices were fabricated over a variety of process conditions to produce an optimized device. Although the material does not show a consistent increase in band gap with oxygenation, absorption in this layer can be virtually eliminated over the relevant spectrum, leading to an increase in short‐circuit current. Meanwhile, fill factor is maintained, and open‐circuit voltage increases relative to baseline devices with sublimated CdS. The trend of device parameters with oxygenation and thickness is consistent with an increasing conduction band offset at the window/CdTe interface. Optimization considering both initial efficiency and stability resulted in a National Renewable Energy Laboratory verified 15.2%‐efficient cell on 3.2‐mm soda‐lime glass. This window material was shown to be compatible with SnO₂‐based transparent conducting oxide and high resistance transparent coated substrates using in‐line compatible processes. Copyright © 2015 John Wiley & Sons, Ltd     

阳离子交换皂石黏土在基质辅助激光解吸电离飞行时间质谱分析中的应用

将一种人工合成的无机聚合物——蒙脱石皂石黏土（smectite,Sm）应用于基质辅助激光解吸电离飞行时间质谱分析（matrix-assisted laser desorption/ionization time of flight mass spectrometry, MALDI-TOF-MS）,以检测糖类化合物。 将传统的有机基质2,4,6-三羟基苯乙酮（trihydroxyacetophenone, THAP）与阳离子交换后的皂石黏土混合制备成新型复合基质,应用于糖类化合物的检测。通过比较不同的制样方法,测定不同分子直径的糖类化合物,发现由于受复合基质晶面间距的限制,只有小分子糖类化合物能进入晶面间隙充分接触有机基质并被离子化,从而实现对小分子糖类化合物的选择性检测。     

基于神经网络的钞票真假识别研究

利用神经网络与光电检测的技术研制了钞票真假识别系统.介绍了系统的结构组成、工作原理、软件系统、神经网络的优化设计、实验及测试结果.经实践验证,其识别结果稳定可靠,可应用于金融智能防伪点钞机与ATM机中.