Geometrically distributed aperiodic circular photonic crystals with broad and isotropic photonic band gaps

In this paper, a new type of circular photonic crystal (CPC) with a geometrical distribution of concentric layers is presented. A broad and isotropic photonic band gap is achieved using this geometrically distributed CPC (GCPC). Also, the influence of the number of concentric layers to the overall band gap of GCPC is studied. It is demonstrated that the band gap broadens with a red shift when the number of concentric layers is increased. The reason for the red shift of the band gap is further investigated.     

Nonlinear spectrum effect on the coherent control of molecular systems

This work demonstrates that the detuning of the fs-laser spectrum from the two-photon absorption band of organic materials can be used to reach further control of the two-photon absorption by pulse spectral phase manipulation. We investigate the coherent control of the two-photon absorption in imidazole-thiophene core compounds presenting distinct two-photon absorption spectra. The coherent control, performed using pulse phase shaping and genetic algorithm, exhibited different growth rates for each sample. Such distinct trends were explained by calculating the two-photon absorption probability considering the intrapulse interference mechanism, taking into account the two-photon absorption spectrum of the samples. Our results indicate that tuning the relative position between the nonlinear absorption and the pulse spectrum can be used as a novel strategy to optimize the two-photon absorption in broadband molecular systems.     

Multilayer dielectric cylindrical mirrors based on omnidirectional reflection from a one-dimensional photonic crystal

A multilayer dielectric cylindrical mirror (MDCM) based on the one-dimensional omnidirectional reflection of a photonic crystal is presented. In this case, the refractive indices of the two materials are 1.6 (polystyrene) and 4.6 (tellurium), and the corresponding optimized thicknesses are 0.75a and 0.25a. A very high reflectance over a wide frequency range is observed. In this case, a is the lattice constant of the photonic crystal. In this band, the MDCM has good reflection and focal properties. Therefore, it is feasible to use the MDCM for integrated waveguide devices. As an example, an etched diffraction grating demultiplexer based on the MDCM is also proposed. Both the operational principle and design of the device are introduced. This provides a method for designing compact integrated waveguide devices.     

Zero permittivity band characteristics in one-dimensional plasma dielectric photonic crystal

We consider the oblique propagation of electromagnetic waves in one-dimensional plasma dielectric photonic crystals, the superlattice structure consisting of alternating plasma and dielectric materials using transfer matrix method. Our results show that photonic band gaps for all polarizations can be obtained in one-dimensional plasma dielectric photonic crystals. These structures can exhibit a new type of band or gap, for the incidence angles other than normal incidence, near frequencies where the electric permittivity of the plasma layer changes sign. This new band or gap arises, from the dispersive properties of the plasma layer, only for TM polarized waves and its width increases with the increasing angle of incidence. This differential behaviour under polarization can be utilized in the design of an efficient polarization splitter. The band characteristic is affected by the plasma width, the plasma density, dielectric width, the dielectric constant of the dielectric medium and angle of incidence.     

带有反射腔的双频相对论返波管的粒子模拟

 设计了一种带有反射腔的能在X波段实现稳定双频输出的圆柱结构相对论返波管,采用2.5维相对论全电磁PIC粒子模拟软件行粒子模拟研究。仿真结果表明:在输入电压433 kV、引导磁场2.2 T的条件下,实现了9.53,10.09 GHz的双频稳定输出,平均输出功率340 MW,平均功率效率24.1%。     

紧凑型P波段相对论返波振荡器的粒子模拟

 设计了一种紧凑型P波段相对论返波振荡器,其电动力学结构是由同轴慢波结构和同轴引出结构组成的。同轴慢波结构缩小了器件的径向尺寸;同轴引出结构缩短了器件的轴向长度,且提高了束波作用效率。通过粒子模拟研究了器件内束波作用的物理过程,模拟结果表明：器件具有结构紧凑、束波作用效率高的特点。在二极管电压700 kV,电流7 kA,导引磁场1.5 T时,器件在频率833 MHz处获得较高的微波输出,饱和后输出微波的平均功率达1.58 GW,效率约为32%,器件电磁结构尺寸仅为108 mm×856 mm。     

中等能量P波段相对论返波振荡器的理论设计与粒子模拟

提出了一种新型的中等能量P波段相对论返波振荡器,该器件将慢波结构由低波段普遍采用的同轴外波纹结构变为同轴双波纹结构,使得径向束-波作用空间扩大了2倍,一定程度上增加了器件的功率容量;另外同轴双波纹结构还较大提高了器件的时间增长率,从而有效地减小了微波输出饱和时间.经优化设计,该结构在二极管电压300 kV、电流3 kA...     

微波射频场在微波管中产生爆炸电子发射特性初步分析

 对微波射频场在微波管内引起的场致发射和爆炸电子发射及等离子体的产生进行了分析,推导了等离子体产生强度与微波振幅、材料的电阻率、热传导系数、质量密度和比热容之间的关系,得到了晶须温度分布的表达式,通过数值解析的方式总结出在远大于微波周期的时间尺度上晶须温度提高随时间线性上升。在模型所述材料特性下,温度的上升率达到了3.22×10¹⁰ ℃/s,在100 ns量级就可以使晶须发生气化形成等离子体。     

低过模高功率微波方圆模式转换器设计

 设计了一种结构简单的高功率微波方圆模式转换器,可以实现圆波导TM₀₁模式与矩形波导TE10模式之间的相互转换。转换器工作在C波段,中心频率4.1 GHz,其输入端口和输出端口相互垂直。计算和仿真结果表明:中心频率处该模式转换器的转换效率可达99%,回波损耗小于-20 dB,转换效率大于90%的带宽大于0.2 GHz。转换器整体3维尺寸都只有10 cm左右。     

相对论速调管放大器杂模振荡的抑制

 研究了相对论速调管放大器（RKA）输入腔和中间腔之间的高阶杂模振荡问题。通过模式分析得知杂模在谐振腔内为TM11模式,而在漂移管中表现为TE11模式,针对该模式能在漂移管中传输的特性,利用漂移管内壁涂覆吸波材料吸收杂模功率的方法进行抑制。通过3维粒子模拟程序,分析了吸波材料的电导率及涂覆长度对抑制杂模增长率的影响。利用模拟分析得到的结果,对漂移管中涂覆吸波材料的RKA输入腔及中间腔结构进行了3维模拟研究,结果显示:合适的吸波材料的引入能够很好地抑制RKA输入腔和中间腔之间的杂模振荡。