长脉冲激光沉积原位生成YBaCuO超导膜

用长脉冲激光(脉冲宽度150μs,波长1.06μm)辐照高温烧结的YBa_2Cu_3O_(7-x)靶,在6Pa的氧气压强下,巳在(100)YSZ单晶衬底上原位生成YBa_2Cu_(?)O_(7-x)超导膜。衬底置于750℃的加热器上,衬底与靶之间的距离5cm,用该法制得的薄膜光亮坚实,正常态呈金属性,零电阻温度为84.7K。用XRD和SEM对薄膜进行了分析研究。     

Photo-Absorption and photochemical decomposition of copper and alkaline-earth ß-diketonates as source gases of high-Tc superconducting films

For low-temperature deposition of oxide films relating to Bi-Sr-Ca-Cu-O superconductors, photo-absorption and -decomposition properties were examined with respect to copper and alkaline-earth ß-diketonates. It was confirmed that all ß-diketonates examined were promising as source materials for photochemical vapour deposition (photo-CVD) using a low-pressure mercury lamp, in view of their large light absorption coefficients at wavelength 254 nm. The light irradiation was effective for the formation of highly crystalline oxide films at temperatures below 600 °C. By combining two sources, Ca₂CuO₃ and SrCuO₂ films were prepared. Photo-CVD of c-axis oriented Bi₂Sr₂CuO_x film was achieved by the irradiation of ternary sources of Bi(C₆H₅)₃ and strontium and copper ß-diketonates at 500 °C.     

厚膜混合集成电路常见工艺缺陷及其消除方法

除设计和材料外，工艺和操作对厚膜混合集成电路的质量和性能也有较大的影响。分析了厚膜混合集成电路生产过程中一些常见的工艺缺陷，如线条变形、起泡、阻值不稳、元件受损、锡珠等的产生原因，并提出了相应的消除方法。     

高温超导薄膜微波非线性研究的进展

文章介绍了高温超导薄膜微波非线性的主要特征，阐述了高温超导薄膜微波非线性产生的原因和相关的研究现状，指出了高温超导薄膜非线性研究中遇到的困难和尚未解决的问题．     

Very high coercivities of top-layer diffusion Au/FePt thin films

The Au/FePt samples were prepared by depositing a gold cap layer at room temperature onto a fully ordered FePt layer, followed by an annealing at 800 °C for the purpose of interlayer diffusion. After the deposition of the gold layer and the high-temperature annealing, the gold atoms do not dissolve into the FePt Ll₀ lattice. Compared with the continuous FePt film, the TEM photos of the bilayer Au(60 nm)/FePt(60 nm) show a granular structure with FePt particles embedded in Au matrix. The coercivity of Au(60 nm)/FePt(60 nm) sample is 23.5 kOe, which is 85% larger than that of the FePt film without Au top layer. The enhancement in coercivity can be attributed to the formation of isolated structure of FePt ordered phase.     

电视节目包装中的文字设计艺术

文字是电视节目包装中的重要元素之一,除了传达信息的基本功能外,经常起到决定整体效果的关键作用。节目包装文字设计应突出本台文化和本土文化,文字的设计必须与节目相匹配,形成统一整体。     

电子通道技术在YBa2Cu3O7外延超导薄膜研究中的应用

本研究采用电子通道技术（ＥＣＰ）对单晶和双晶外延生长的ＹＢａ＿２Ｃｕ＿３Ｏ＿７（ＹＢＣＯ）超导薄膜的结构、取向和表面完好性作检测，并证实对衬底的预处理可改善外延超导薄膜的质量；还对ＹＢＣＯ／ＣｅＯ＿２／ＭｇＯ／ＳｒＴｉＯ３的双外延薄膜作研究。     

薄膜波导光隔离器和光电子单片集成技术

叙述了Ｂｉ，Ａｌ：ＹＩＧ薄膜的液相外延生长，研究了这种薄膜材料的光吸收系数、法拉第旋转角、磁光优值及生长感生磁各向异性与Ｂｉ含量的关系。在此基础上，连续外延生长了作单模磁光波导的双层Ｂｉ，Ａｌ：ＹＩＣ薄膜。光纤偏振器的使用使薄膜波导光隔离器向实用化迈进了一步，恒磁薄膜作偏磁场为器件集成化作出了贡献。采用ＭＯＣＶＤ技术，在ＧＧＧ（钆镓石榴石）基片上同时外延生长Ⅲ－Ⅴ族半导体薄膜和钇铁石榴石（ＹＩＧ）薄膜，把光隔离器和磁光光源直接集成在一起，是一种非常有前景的光电子集成组件。     

A STUDY OF J-INTEGRAL OF THE ORTHOTROPIC COMPOSITE MATERIAL

ＡＳＴＵＤＹＯＦＪ－ＩＮＴＥＧＲＡＬＯＦＴＨＥＯＲＴＨＯＴＲＯＰＩＣＣＯＭＰＯＳＩＴＥＭＡＴＥＲＩＡＬＷａｎｇＡｉ－ｑｉｎ（王蔼勤）；ＦｅｎｇＢａｏ－ｌｉａｎ（冯宝莲）；ＹａｎｇＷｅｉ－ｙａｎｇ（杨维阳）（ＴａｉｙｕａｎＨｅａｖｙＭａｃｈｉｎｅｒｙ．...     

c轴定向氮化铝薄膜的制备

利用电子回旋共振 (ECR)微波增强化学气相沉积法 (PECVD)并使用氮气 (N2 ) ,氩气 (Ar)和AlCl3蒸气作为气源在直径为 6 .35cm的 (10 0 )单晶硅片表面制备了c轴定向氮化铝 (AlN)薄膜 ,并使用X射线衍射仪及其X射线特征能谱和扫描电镜 (SEM)分析了薄膜特征 ,研究了微波功率、基板温度和N2 流量对薄膜c轴定向的影响 ,得到了c轴偏差角小于 5°的高质量大面积AlN薄膜。