反应挤出法合成S/B多嵌段共聚物的研究

在阴离子引发体系下 ,以双螺杆挤出机为反应器 ,采用丁二烯、苯乙烯混和单体加料方式 ,本体法一步合成了S B多嵌段共聚物 .考察了螺杆转速、进料速率以及不同丁苯配比对反应挤出合成PS及S B嵌段共聚物聚合转化率的影响 .用1 H NMR、IR、DMA、TEM等方法对S B嵌段共聚物进行了表征 ,结果表明共聚物由多个微小的丁二烯嵌段和少量无规段组成 .当丁二烯含量少至 15 %左右时 ,其嵌段可回缩成球状 ,粒径大约在 30～ 5 0nm .该材料的韧性随着共聚物中丁二烯含量的增加而逐渐提高 ,特别是断裂延伸率的提高尤为显著     

Effect of Pluronic F127 on the pore structure of macrocellular biodegradable polylactide foams

Thermally induced phase separation technique was utilized to fabricate biodegradable poly(l ‐lactic acid) (PLLA) macrocellular foams which were capable of being applied in tissue engineering. The block copolymer Pluronic F127 composed of (polyethyleneoxide)‐(polypropyleneoxide)‐(polyethyleneoxide) [(PEO)‐(PPO)‐(PEO)] was used as a porogen. Water/dioxane mixtures with different volume ratios were used as solvents. The addition of Pluronic F127 could induce an appearance of large pores (50–200 μm) besides small pores (10–20 μm) or a change from a solid–liquid phase separation to a liquid–liquid phase separation. The role of Pluronic F127 depends on the water/dioxane ratios in the PLLA/dioxane/water system. The X‐ray diffraction patterns and porosity measurement results showed that Pluronic F127 was crystallized and existed on the pore wall. The effect of Pluronic F127 on changing pore structure is attributed to the occurrence of the interaction of the lipophilic PPO blocks in Pluronic F127 with PLLA clews, consequently, this results in PLLA aggregation and early phase separation on cooling. Copyright © 2004 John Wiley & Sons, Ltd.     

用透射电镜法研究聚(苯乙烯-异戊二烯)二嵌段共聚物微相分离的微区尺寸

本文采用透射电镜(TEM)法,系统地研究了具有不同组成,不同分子量和不同形态结构的聚(苯乙烯-异戊二烯)二嵌段共聚物,并由TEM照片直接测量具有栓状,层状和有规双连续双金钢石(OBDD)结构的PS-PI二嵌共聚物的微区尺寸,讨论了其与分子量的关系。实验证明嵌段共聚物微相分离有规结构的微区尺寸大小与分子量呈2/3的关系。     

α－甲基苯乙烯对HIPS／SBS共混物流变行为及力学性能的影响

用锥板式流变仪研究了α－ＭＳ对ＨＩＰＳ／ＳＢＳ共混物流动行为的影响，结果表明：不同α－ＭＳ用量的共混物和如曲线相似．均随增加τ＿ｗ增大、η＿ａ下降。流动指数，ｎ均小于１为非牛顿假塑性流体。加入少量（约２．５％）α－ＭＳ使共混物熔融指数提高３倍，其总体力学性能变化不大。     

Enhancement of photocurrent generation by honeycomb structures in organic thin films.

A light-emitting poly (distyryldimethylbenzene-co-triethylene glycol) rod-coil block copolymer was used to fabricate films with three-dimensionally ordered honeycomb structures by the breath-figure method. Photocurrent generation and photovoltaic performance are studied, and the dependence of photocurrent on applied electric field is investigated. Introducing the ordered porous structure significantly improves the photoelectric conversion behavior, because porous structures not only enhance the light-harvesting efficiency but also benefit charge separation and charge transfer. This phenomenon may have great prospects for enhancing the photovoltaic behavior of organic thin-film devices.     

Swelling of physically cross-linked copolymers in water vapour

A general thermodynamic equation for the swelling of a cross-linked polymer system in the vapour of a swelling agent has been derived under isothermal and isobaric conditions. The equation is used to describe the equilibrium uptake of water by elastomers Arnitel^® (DSM), which are hard-soft-segment block copolymers in which the hard segments poly(butylene terephthalate) crystallise and are responsible for a physical cross-linking. The gravimetrically determined degrees of swelling of different elastomers in water vapour of various partial pressures are analysed and discussed by the application of an extended semi-empirical swelling equation of Flory-Huggins-Staverman-van Santen.     

Structure and dynamics of self-assembled poly(ethylene glycol) based coiled-coil nano-objects.

Herein we describe the structure and dynamics of self-assembled nano-objects generated from poly(ethylene glycol) based (PEG-ylated) coiled-coil hybrid block copolymers. Electron paramagnetic resonance (EPR) experiments on spin-labeled samples provided a strong indication for a parallel alignment of the peptide helices in at least the dimeric coiled-coil nano-object and indicated that the PEG chains are folded rather closely around the peptide core of the nano-objects. The EPR results were supported by AFM studies, which revealed the presence of discrete nanosized objects in thin, spin cast films of the block copolymers on mica substrates. Since their size and structure may be engineered via directed mutations in the amino acid sequence, these nano-objects may be interesting building blocks for the development of supramolecular materials with various potential applications.     

Sterically hindered aliphatic amines in the controlled synthesis of polystyrene

The kinetic features of radical polymerization of styrene in the presence of primary and secondary aliphatic amines combined with benzoyl peroxide and the molecular-mass characteristics of the resulting polymers were studied. In the presence of peroxide initiators, aliphatic amines, as potential sources of stable aminoxyl radicals, provide the synthesis of polystyrene with a controlled molecular mass without gel effect at a relatively high rate. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 159–164, January, 2007.     

Transition metal 1,2-bidentate thiolates as building blocks and their construction into cluster complexes

Simple fragments of transition metal 1,2-bidentate thiolates, the so-called building blocks of the general compositions ML₃, ML₂, ML, M(O)L₂, ML₂L, MLL, etc. have been proposed to constitute the di-, tri- and tetranuclear complexes concerned in this review. Structureal regularities and characteristics have been discussed and summarized according to the thiolato ligands edt and pdt, bdt and tdt, mp, and mpo, and mpp, respectively.Abbreviations H₂mpo o-mercaptophenol - Hmpo 2-mercaptopyridine-N-oxide - R₂dtc N,N-dialkyldithiocarbamate - Haet 2-aminoethanethiol - H₂bdt o-benzenedithiol - H₂pdt 1,2-propanedithiol - H₂tdt toluene-3,4-dithiol - Hmpp-mppH bis-(3-hydroxy-2-pyridyl)disulfide - Hmp-mpH bis-(2-oxyphenyl)disulfide - H₂edt 1,2-ethanedithiol - dppe 1,2-bis(diphenylphosphino)ethane - H₂tedt 3,4,5,6-tetrachlorobenzene-1,2-dithiol - H₂tpdt 3-thiapentane-1,5-dithiol - H₂mnt maleonitriledithiol - Him imidazole - Bz benzyl - py pyridine     

苯乙烯-异戊二烯嵌段共聚物分子运动的脉冲核磁共振研究

用西德Bruke,MSL-300核磁共振谱仪研究了三个不同系列的苯乙烯-异戊二烯嵌段共聚物的固体回波谱。用PASCAL语言在谱仪提供的计算机上、用线性最小二乘法回归分析把实验曲线分解成快速和慢速两个组分,它们分别对应于嵌段共聚物中刚性相和流动相,从而给出样品两相结构的定性定量信息。