Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

The influence of hard‐segments on two‐phase structure and shape memory properties of PCL‐based segmented polyurethanes

Poly(ε‐caprolactone)‐based segmented polyurethanes (PCLUs) were prepared from poly(ε‐caprolactone) diol, diisocyanates (DI), and 1,4‐butanediol. The DIs used were 4,4′‐diphenylmethane diisocyanate (MDI), 2,4‐toluenediisocyanate (TDI), isophorone diisocyanate (IPDI), and hexamethylene diisocyanate (HDI). Differential scanning calorimetry, small‐angle X‐ray scattering, and dynamic mechanical analysis were employed to characterize the two‐phase structures of all PCLUs. It was found that HDI‐ and MDI‐based PCLUs had higher degree of microphase separation than did IPDI‐ and TDI‐based PCLUs, which was primarily due to the crystallization of HDI‐ and MDI‐based hard‐segments. As a result, the HDI‐based PCLU exhibited the highest recovery force up to 6 MPa and slowest stress relaxation with increasing temperature. Besides, it was found that the partial damage in hard‐segment domains during the sample deformation was responsible for the incomplete shape‐recovery of PCLUs after the first deformation, but the damage did not develop during the subsequent deformation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 557–570, 2007     

SDI接口数字监视设备的设计与实现

介绍了一种对SDV(串行数字视频)信号进行解码的设备设计方案，提出了该系统的总体构架，并对该系统的硬件设计、软件设计进行了全面的论述。设计的产品具有较高的性能价格比，已进入了推广阶段。     

X波段五腔渡越管振荡器的理论与实验研究

 提出了一种新结构的X波段五腔渡越管振荡器，进行了理论和实验研究。根据场分布进行了一维非线性分析，结果表明该结构可以产生高功率微波，并判断了工作模式，为TM₀₁模的3π/5模。采用粒子模拟验证了一维非线性分析的结论，并优化设计出五腔渡越管振荡器,优化结果为：输出功率约1 GW， 工作频率9.3 GHz，束波转换效率约22%。实验中，通过参数调节，得到频率约9.25 GHz，峰值功率约780 MW，脉宽（半高宽）21 ns的输出微波，束波转换效率约为16%。实验结果与模拟结果基本符合。     

Thermal behavior of the maleic anhydride modified poly(3-hydroxybutyrate)

Poly(3-hydroxybutyrate), PHB has been structurally modified through reaction with maleic anhydride, MA. Transesterification reaction was carried out fixing the PHB and MA and besides time and temperature the concentration of the triethylamine (used as catalyst) was changed. Glass transition, melting and crystallization temperature obtained from DSC curves and thermal degradation temperatures obtained from TG traces were used to evaluate the influence of the reaction conditions on the modification of PHB according to factorial design. On the base of the results the optimum conditions are to perform the PHB modification reaction with MA reaction at 110°C for 1 h with 5% v/v triethylamine.     

FHCF: A Simple and Efficient Scheduling Scheme for IEEE 802.11e Wireless LAN

The IEEE 802.11e medium access control (MAC) layer protocol is an emerging standard to support quality of service (QoS) in 802.11 wireless networks. Some recent work shows that the 802.11e hybrid coordination function (HCF) can improve significantly the QoS support in 802.11 networks. A simple HCF referenced scheduler has been proposed in the 802.11e which takes into account the QoS requirements of flows and allocates time to stations on the basis of the mean sending rate. As we show in this paper, this HCF referenced scheduling algorithm is only efficient and works well for flows with strict constant bit rate (CBR) characteristics. However, a lot of real-time applications, such as videoconferencing, have some variations in their packet sizes, sending rates or even have variable bit rate (VBR) characteristics. In this paper we propose FHCF, a simple and efficient scheduling algorithm for 802.11e that aims to be fair for both CBR and VBR flows. FHCF uses queue length estimations to tune its time allocation to mobile stations. We present analytical model evaluations and a set of simulations results, and provide performance comparisons with the 802.11e HCF referenced scheduler. Our performance study indicates that FHCF provides good fairness while supporting bandwidth and delay requirements for a large range of network loads. Pierre Ansel received a multidisciplinary in-depth scientific training in different fields such as Pure and Applied Mathematics, Physics, Mechanics, Computer Science and Economics from the Ecole Polytechnique, Palaiseau, France. Then, he joined the Ecole Nationale Superieure des Telecommunications, Paris, France in 2005 where he went further into electronics, databases, computer network security and high speed networks. He received a multidisciplinary master of sciences degree and an additional master of sciences degree in telecommunications in 2005. He did a summer internship in 2003 in INRIA, Sophia Antipolis, France where he worked on the Quality of Service in 802.11 networks at Planete Group, France. Then in 2004, he joined France Telecom R&D, Issy-les-Moulineaux, France to work on Intranet Security issues. He designed a WiFi security supervision architecture based on WiFi Intrusion Detection Sensors. He is currently a French civil servant and belongs to the French Telecommunications Corps. Qiang Ni received the B.Eng., M.Sc. and Ph.D. degrees from Hua Zhong University of Science and Technology (HUST), Wuhan City, China in 1993, 1996 and 1999 respectively. He is currently a faculty member in the Electronic and Computer Engineering Division,School of Engineering and Design, Brunel University, West London, U.K. Between 2004 and 2005 he was a Senior Researcher at the Hamilton Institute, National University of Ireland, Maynooth. From 1999 to 2001, he was a post-doctoral research fellow in the multimedia and wireless communication laboratory, HUST, China. He visited and conducted research at the wireless and networking group of Microsoft Research Asia Lab during the year of 2000. From Sept. 2001 until may 2004, he was a research staff member at the Planète group of INRIA Sophia Antipolis France. Since 2002, he has been active as a voting member at the IEEE 802.11 wireless LAN standard working group. His current research interests include communication protocol design and performance analysis for wireless networks, cross-layer optimizations, vertical handover and mobility management in mobile wireless networks, and adaptive multimedia transmission over hybrid wired/wireless networks. He has authored /co-authored over 40 international journal/conference papers, book chapters, and standard drafts in this field. He is a member of IEEE. E-mail: Qiang.Ni@ieee.org Thierry Turletti received the M.S. (1990) and the Ph.D. (1995) degrees in computer science both from the University of Nice – Sophia Antipolis, France. He has done his PhD studies in the RODEO group at INRIA Sophia Antipolis. During the year 1995–96, he was a postdoctoral fellow in the Telemedia, Networks and Systems group at LCS, MIT. He is currently a research scientist at the Planete group at INRIA Sophia Antipolis. His research interests include multimedia applications, congestion control and wireless networking. Dr. Turletti currently serves on the Editorial Board of Wireless Communications and Mobile Computing.     

Oxidative Coupling of Thiols to Disulfides with Ti(IV) in the Presence of NaI under Air Atmosphere

Ti(IV) as TiCl₃(O₃SCF₃) and TiO(O₂CCF₃)₂ are used as efficient catalysts for oxidative coupling of aliphatic, aromatic and heteroaromatic thiols to their disulfides in the presence of NaI under air atmosphere.     

Courants caractéristiques et analyse de SEREigen currents and RCS analysis

In this Note, we return to the theory of characteristic modes which was introduced 30 years ago for electromagnetic scattering problems. A simple mathematical framework is proposed and complete definitions are given. The potential interest of this theory in terms of Radar Cross Section (RCS) analysis is then discussed, especially in the low frequency case. Finally, a 3-D example is presented to illustrate the efficiency of this decomposition. To cite this article: Y. Morel et al., C. R. Mecanique 332 (2004).     

中子俘获瞬发γ射线数据评价(英文)

简要地介绍了中子俘获瞬发γ射线数据及其衰变纲图的评价方法技术、主要程序及其功能、数据评价流程、强度平衡检验，以及对A=1-44的稳定核素和A>190的部分稳定核素的热中子俘获瞬发γ射线数据及其衰变纲图评价的具体应用.The method of prompt γ-ray data evaluation for neutron capture and how to calculate the prompt γ-ray intensities of neutron capture have been briefly presented. The prompt γ-ray data of thermal-neutron capture of some stable nuclei for A=1-44 and A>190 have been evaluated. The ENSDF format has been adopted. The checks of intensity balance and format have been made. The examples are given to illustrate its application.     

卤代对苝醌类光敏剂光敏活性影响的量子化学研究

以一种新型的醌类光敏剂—菌生素 (HMB)为模型化合物 ,利用量子化学从头算HF/ 6 31G和含时密度泛函TD B3LYP/ 6 31G方法计算研究了卤代作用对醌类光敏剂分子性质和光敏活性的影响 .结果发现 ,卤代作用降低了HMB母体的HOMO和LUMO能级 (EHOMO和ELUMO)及其差值△E ,随卤族元素从上到下 ,EHOMO和ELUMO呈增大趋势 ,而△E呈减小趋势 ,使得分子激发光谱有不同程度的红移 ,在增加PQP三重态量子产率的同时降低了分子最低三重激发态的能量 ,两种作用相互抵消 ,使得卤代物的 1O2 量子产率与母体相似 ;增加了分子的绝热电子亲合势 ,使分子产生O2 -的能力下降 ;卤原子的引入 ,降低了HMB母体分子内氢键的强度 ,同时使顺式构型的分子内质子传递势垒增大 ,而使反式构型势垒减小 .