REACTION OF LITHIUM DERIVATIVE OF DIETHYL PHENYLMETHANE-PHOSPHONATE WITH KETONES

Abstract

The reaction of the lithium derivative of diethyl ester of phenylmethanephosphonic acid (1-Li) with alkanones, cycloalkanones, alkylaryl and diarylketones 2s-b is studied at -70°C in THF. The corresponding adducts-diethyl esters of l-phenyl-2,2-dialkyl(phenyl)-2-hydroxyethanephosphonic acids 3s-h are isolated, their yields being usually higher at short reaction time. The olefination of 3-Li as well as of 3 (both by thermolysis or in acidic media) proceeds in low degree, while in the case of 3-Na the yields of alkenes 4 are good. The relative configurations of 3b. 31 and 3g are determined by IR and NMR-spectra, as well as by their stereospecific olefination. “Threo”-stereoselectivity of the addition stage of the reaction of 1-Li with 2b, 21 and 2g is observed, the “threo”/“erythro” ratio remaining independent on the reaction time.     

A new method for the determination of the 34S/32S ratio of water-soluble sulphur in soil

A new method for the determination of the ³⁴S/³²S ratio of water-extractable sulphate in soil is described. Soils are extracted directly with deionized water, which is evaporated down. The remaining residue is then rehydrated and transferred to tin cups containing an adsorbent and mixed with an oxygen donor (V₂O₅). Samples are then analysed using a continuous flow isotope ratio mass spectrometer. The new method requires around 10?g soil per determination, compared to much larger amounts (up to kilograms) of soil required for the previous methods. Sample preparation and subsequent analysis is quick and efficient. The method is demonstrated using a number of soils collected from around the world to provide a range of determined δ³⁴S values. The δ³⁴S values of water-extractable sulphur were broadly similar to those of the soil total sulphur.     

Improve on/off ratio of organic heterojunction transistors by adopting single-sandwich configuration

Organic heterojunction transistors (OHJTs) based on 5,5′″-bis(naphtha-2-yl)-2,2′:5″,2′″-quaterthiophene (NaT₄)/copper-hexadecafluoro-phthalocyanine (F₁₆CuPc) heterojunction were fabricated in single-sandwich and sandwich configurations, respectively. All the devices operated in depletion-accumulation (normally-on) mode. High field-effect mobility of 0.35 cm²/Vs was obtained for all devices, which was higher than that, 0.20 cm²/Vs of the devices with NaT₄ as active layer. The on/off ratio of 1 × 10⁵ was obtained for OHJTs with single-sandwich configuration, which is three orders of magnitude higher than that of OHJTs with sandwich configuration. Compared with OHJTs with sandwich configuration, the higher on/off ratio was mainly determined by the lower off state current in OHJTs with single-sandwich configuration. In OHJTs with single-sandwich configuration, the well-type shield effect of the source and drain electrodes caused a very narrow empty region in F₁₆CuPc film, which is responsible for the lower off state current.     

A numerical investigation of the influence of the aspect ratio in three‐dimensional separated flows

The influence of aspect ratio in three‐dimensional, numerical experiments of separated flows is studied in the case of the backward‐facing step at Reynolds numbers 600, 800, and 950. The computational domain is designed as an actual laboratory experiment. The governing equations are the steady state, isothermal, and incompressible Navier–Stokes equations. The expansion ratio of the computational domain is 1:2. The aspect ratio varies from 1:10 to 1:40. The results of the computations focus on the spanwise variations of the length and the strength of the two eddies along the lower and upper wall. It is concluded that both numerical and laboratory experiments should be designed with an aspect ratio of at least 1:20, if only the accuracy of the position of the detachment and the re‐attachment points matters. If the accuracy of the shear‐stress distributions is also taken into account, then an aspect ratio of at least 1:30 should be chosen. Finally, if the magnitudes of the vortex centers are also considered, then only the aspect ratio of 1:40 qualifies for a realization of two‐dimensional flow conditions in the plane of symmetry. This is contrary to the common practice in the field, at least from the side of laboratory experiments, where an aspect ratio of 1:10 is still considered adequate for this purpose. Copyright © 2011 John Wiley & Sons, Ltd.     

SYNTHESIS AND PROPERTIES OF ANILING ANILING AND 0-AMINOBENZENESULFONIC ACID COPOLYMER*

Poly(aniline- co-o-aminobenzenesulfonic acid) (PAOABSA) as a water soluble conducting polymerwas synthesized by chemical polymerization. The productivity and the room-temperature conductivity of thecopolymer were measured as a function of the reaction conditions, such as reaction temperature, the ratio ofoxidant to monomer and the degree of sulfonation defined as the ratio of sulfur to nitrogen atoms(S/N). Themain results obtained are summarized as follows : (1) lower reaction temperature (at about 0℃) is favorablefor the enhancement of the room-temperature conductivity of the copolymer; (2) higher content of oxidant isunfavorable for increasing the room-temperature conductivity of the copolymer; (3) both productivity androom-temperature conductivity of the copolymer decrease with increase of the degree of sulfonation whichwas always lower than 0.5 even an excess of o-aminobenzenesulfonic acid was added, probably because thereactivity ratio of aniline (γ=2.99± 0.05) is much higher than that of o-aminobenzenesulfonic acid (γ_2 = 0.06±0.02) estimated by using Fineman-Ross method and least square method.     

Gauss’ law of error revisited in the framework of Sharma-Taneja-Mittal information measure

We reformulate the Gauss’ law of error in presence of correlations which are taken into account by means of a deformed product arising in the framework of the Sharma-Taneja-Mittal measure. Having reviewed the main proprieties of the generalized product and its related algebra, we derive, according to the Maximum Likelihood Principle, a family of error distributions with an asymptotic power-law behavior.      

基于某变电站L90保护误动作分析

针对某变电站内线路正常运行时突发差动保护动作,后期进行认真检查核对后,发现是一起误保护动作过程,实际上L90保护出厂时自身相关参数返回时间过长而导致的误动作。     

自适应阵列抗干扰性能的解析定量分析

自适应阵列抗干扰性能常用输出信干噪比(Signal-to-Interference and Noise Ratio,SINR)损失、抗干扰改善因子(ECCM Improvement Factor,EIF)等来衡量,但目前尚缺乏解析的定量分析.为此,采用归纳法理论推导了均匀线阵条件下输出SINR损失、EIF等指标的解析表达式,定量获取了自适应阵列抗干扰性能.仿真实验验证了理论分析结果的有效性及快拍数对自适应阵列抗干扰性能的影响.     

Orientational and electro-optical properties of liquid crystal aligned with a directly spinnable carbon nanotube web

We investigated the orientational and electro-optical properties of a nematic liquid crystal (LC) aligned with a directly spinnable carbon nanotube (CNT) web functioning both as an electrode and as an alignment layer. The LC molecules were uniformly oriented along the drawing direction of the CNT web and the spatially averaged birefringence was comparable to a rubbed polyimide sample. The CNT web sample also showed smaller residual DC and hysteresis compared to the polyimide sample.     

Naphthalene and benzene levels in microenvironments associated with potential exposure: new and old apartments with moth repellents,and cabins of passenger cars

A lesser degree of information is available with respect to microenvironments associated with potential exposure to naphthalene, in comparison with other volatile organic compounds. The current study investigated the levels of benzene as well as naphthalene, both in the indoor and outdoor air of apartments and in the cabins of passenger cars. Two groups of 20 apartment buildings (20 new and 20 old) were chosen on the basis of the selection criteria (apartment location and size). In addition, 10 actual commuters were recruited for this study. The equal number of drivers was recruited for the study for comparison of two types of fuels for vehicles (five drivers of gasoline-fuelled and five drivers of diesel-fuelled passenger cars). Indoor naphthalene concentrations were similar between old and new apartments, while the benzene concentrations in new apartments were significantly higher than those of old apartments. The naphthalene concentrations in bedrooms, where wardrobes with moth repellent (MRs) were placed, were significantly higher than those for living rooms where no MRs were present. In turn, these indoor concentrations were significantly higher than outdoor levels. It is noteworthy that the mean and median values of naphthalene measured in the bedrooms exceeded the USEPA RfC (inhalation reference concentration) of 3?µg?m^?3, and the living room values were close to the RfC, while the residential benzene levels exceeded the European benzene limit of 5?µg?m^?3. In contrast, the maximum outdoor levels were well below that of the RfC. The use of passenger cars appeared to be a significant daily activity for both naphthalene and benzene exposure. The naphthalene-to-benzene ratios varied with the type of microenvironments. Both the indoor naphthalene and benzene concentrations in the present study were much higher than those of other studies.