球磨法制备异质结型光催化剂ZnO/Bi_4Ti_3O_(12)及催化性能

本文用水作为分散介质,掺杂一定量的ZnO于Bi_4Ti_3O_(12)中,采用高能球磨法制备了异质结型光催化剂ZnO/Bi_4Ti_3O_(12).利用UV-Vis、XRD、SEM和PL等仪器对样品进行了分析与表征.以375 W中压汞灯为光源,通过对亚甲基蓝的氧化来研究其光催化活性.结果表明,对于光氧化亚甲基蓝(MB),异质结型光催化剂ZnO/Bi_4Ti_3O_(12)光催化活性高于钛酸铋的光催化活性.当ZnO的掺杂量分别是0.0和0.5wt.%,异质结型光催化剂ZnO/Bi_4Ti_3O_(12)对亚甲基蓝光氧化率分别达到50.2和80.3 %.     

砷、锑、铋类药物的应用历史和现状

近年来,由于对主族元素砷、锑、铋的生物功能研究的不断深入,人们已经从仅仅关注它们对人体的生物毒性到开始研究它们在化学药物领域的应用和潜力。本文简要的介绍了砷、锑、铋作为药物应用的历史,综述了近年来砷、锑、铋的化合物在抗癌、治疗白血病、抗寄生虫病和抗菌方面的一些应用,以及用于发现这些药物的靶分子和结合蛋白的现代生物技术。     

微波加热合成多孔花状结构的纳米α-Bi_2O_3

<正>金属氧化物如氧化钛、氧化锌、氧化铜、氧化铁和氧化铋等是一类重要的半导体材料,它们在磁存储介质、太阳能转换、电子器件和催化等领域里有着广泛的应用,因此其纳米粉体的制备及性能研究吸引了众多的科学工作者。     

The influence of sulfur substitution on the atomic displacement in Bi2Ti2O7

To clarify the role of A₂O′ and B₂O₆ networks on cation displacement observed in Bi₂Ti₂O′O₆, we used density functional theory calculations to examine the effect of sulfur substitution on the O′ and O sites on lone pair formation and resulting atomic displacement observed in Bi₂Ti₂O′O₆. Cation displacement in bismuth titanate is suppressed only when S is substituted on the O′ site. Analysis of the electronic structure shows that S substitution on the O′ site suppresses the formation of the asymmetric p-type lone pair by modifying the Bi-anion hybridization. Lone pair formation is favored in Bi₂Ti₂O′S₆ and the atomic displacement is larger than that observed in Bi₂Ti₂O′O_6. This enhanced displacement is due to weaker Bi-S versus Bi-O interactions leading to significantly stronger hybridization between the Bi and O′ states in Bi₂Ti₂O′S₆. We also induced lone pair formation in a metallic bismuth pyrochlore oxide (Bi₂Ru₂O′O₆) by modifying the Bi-O interactions through S substitution on the B₂O₆ network, indicating atomic displacement on the A₂O′ network may be achieved by modifying the B₂O₆ network.     

Preparation and Structural Defects of Al2-xZrx＋yTi1-yO5 and Al4.54Si1.46O9.73 Multiphase Material

In the study, sludge from the aluminum profile factory and kaolin were used as the raw materials. Through adding ZrO2 mineralizer in different contents, Al2-xZrx+yTi1-yO5 and Al4.54Si1.46O9.73 solid solution multiphase material was prepared to effectively inhibit the decomposition of aluminum titanate solid solution and optimize high temperature property of the multiphase material. With XRD and SEM means, crystalline structure and microstructure of each sample were characterized, and properties of each sample were tested. According to experimental results, the optimal addition amount of ZrO2 mineralizer was determined to be 1.5%. Correspondingly, contents for aluminum titanate solid solution, mullite solid solution and α-Al2O3 were 70.3%, 26.8% and 2.9% respectively, bulk density was 3.20 g/cm3, degree of porosity was 5.57%, water absorption rate was 1.74%, and the once thermal shock rupture strength retention rate was 90.52%.     

pH值对Bi2MoO6晶体形貌和可见光催化性能的影响

以(NH₄)₆Mo₇O₂₄·4H₂O和Bi(NO₃)₃·5H₂O为原料,采用普通水热法制备Bi₂MoO₆光催化剂,研究pH值对制备该光催化剂的影响.对所制备的系列样品,采用X-射线衍射仪(XRD)、扫描电子显微镜(SEM)、比表面积分析仪、X射线光电子能谱仪(XPS)和紫外-可见漫反射(UV-Vis DRS)进行表征.结果表明:pH值对Bi₂MoO₆晶体的物相组成、形貌和光催化性能均有显著影响.pH值为1~7时,所制备的样品为纯相Bi₂MoO₆,pH值为9或11时,出现第二相Bi_3.64Mo_0.36O_6.55;随着pH值的升高,形貌依次为纳米棒、纳米片和无规则纳米颗粒.在可见光(λ≥420 nm)照射下,通过光催化降解罗丹明B(Rhodamine B,RhB),探讨了制备Bi₂MoO₆的pH值对其可见光催化活性的影响.当pH=7时,制备的样品光催化效果最好,光照50 min后对初始浓度为5 mg·L^-1的罗丹明B溶液的降解率为85%.     

层状、花形和棒状钛酸铋纳米结构的可控合成及光催化性能

通过可控水热法,制备出层状、花形和棒状钛酸铋(Bi4Ti3O12,BIT)纳米结构。通过X射线衍射(XRD)和场发射扫描电子显微镜(FESEM)观测其结构和形貌特征。XRD图显示,所制备的样品为层状钙钛矿结构。FESEM结果表明,通过控制水热过程的反应参数可以得到不同形貌的纳米粉体。紫外-可见漫反射光谱(UV-Vis DRS)表明BIT样品的带隙能约为2.63～2.95 eV。利用可见光(λ>420 nm)照射下的甲基橙降解实验评价了BIT样品的光催化性能。结果表明,BIT的光催化活性比掺氮TiO2(N-TiO2)高得多。所制备的层状BIT纳米结构光催化效率最高,经可见光照射360 min,甲基橙溶液的降解率可达95.0%。同时还研究了结构和形貌对不同条件下制备的BIT样品光催化活性的影响。     

Study of the electronic and atomic structure of thermally treated SrTiO3(110) surfaces

The electronic structure of heated SrTiO₃(110) surfaces was investigated with metastable impact electron spectroscopy and ultraviolet photoelectron spectroscopy (He(I)). Scanning tunnelling microscopy and atomic force microscopy (AFM) were used to study the topology of the surface. The crystals were heated up to 1000°C under reducing conditions in ultrahigh vacuum or under oxidizing conditions in synthetic air for 1 h, respectively. Under both conditions microfacetting of the surface is observed. The experimental results are compared with ab initio Hartree–Fock calculations, also presented here, carried out for both ideal and reconstructed SrTiO₃(110) surfaces. The results give direct evidence for Ti termination of the faceted TiO₂ rows. Copyright © 2003 John Wiley & Sons, Ltd.     

二元ZnCo-LDH助催化剂对BiVO4光电化学性能的促进

钒酸铋(BiVO_4)是最有前景的将太阳能转化为氢能(STH)的光阳极材料之一,但其本身严重的电子-空穴复合严重影响了其实用性。本文中,我们报道了用一步电沉积法将高效的二元ZnCo-LDH助催化剂沉积在钒酸铋(BiVO_4)光阳极上,大大提升了钒酸铋(Bi VO4)的光吸收能力,并且加速了水氧化反应动力学,显著促进了光生空穴向半导体表面的转移,减轻了表面电荷复合。BiVO_4/ZnCo-LDH光阳极在1.23 V(vs RHE)偏压下,0.5 mol·L-1磷酸钾(KPi)电解液中的光电流密度达到2.85 mA·cm~(-2),是纯BiVO_4的2.59倍,且起始电位(Von)从930 m V下降到270 m V。BiVO_4/ZnCo-LDH复合光阳极表现出65%的高表面电荷分离效率(1.23 V(vs RHE)),而纯BiVO_4的仅为30%。