A facile synthesis of aliphatic polybenzoxazoles from a bis(o-aminophenol) or its hydrochloride and aliphatic dinitriles

A facile one-step method for the synthesis of aliphatic polybenzoxazoles has been developed. Thus, a series of aliphatic polybenzoxazoles having inherent viscosities of 0.2–0.7 dL/g in concentrated sulfuric acid were successfully synthesized by the melt polycondensation of alipatic dinitriles with 4,4′-diamino-3,3′-dihydroxybiphenyl (AHB) or its hydrochloride (AHB–HCl) with the elimination of ammonia or ammonium chloride, respectively. Monomer AHB–HCl was more reactive than the parent AHB, thereby affording higher molecular weight polybenzoxazoles in a shorter reaction time. The aliphatic polybenzoxazoles having 6–10 methylene units were highly crystalline with melting temperatures in the range of 187–308°C, which were stable up to 400°C in a melt state in nitrogen. © 1994 John Wiley & Sons, Inc.     

羟基化合物及其葡醛酸苷化学结构与RP—HPLC保留行为相关性研究

采用体外孵育生物合成方法获得羟基化合物葡醛酸苷系列化合物，并对其反相高效液相色谱保留行为及底物与其葡醛酸结合物保留行为相关性进行了研究，建立了相应的结构－色谱保留行为相关性方程及葡醛酸苷类代谢物保留行为的预测方法。将ＱＳＲＲ研究扩展到药物代谢物领域，对药物Ⅱ相葡醛酸化代谢产物的ＨＰＬＣ分析提供了帮助。     

Investigation on property and mechanism of redox wave of methylhesperidine at Hg electrode

The voltammetric behaviors of methylhesperidine (MH) were studied by means of linear sweep voltammetry, cyclic voltammetry and normal pulse voltammetry. In the Brit-ton-Robinson buffer solutions with pH values from 2.05 to 6.37, MH could yield three reduction waves PC1,PC2 and PC3. PC1 wave is an adsorptive pre-wave. PC2 wave is an irreversible reduction of pre-protonated MH involving one electron and one proton. PC3 wave is an irreversible wave of reduction species radical of MH involving one electron.     

有机小分子染料和聚阳离子分子超薄膜的制备及其摩擦学性能研究

制备了以有机小分子染料酸性红 1 8为阴离子、以聚烯丙基氯化铵和聚乙烯亚胺为聚阳离子的分子沉积膜 ,用紫外可见分光光度计、接触角测定仪和椭圆偏振光测厚仪对所制备的超薄膜进行了表征 .用DF PM型动 静摩擦系数精密测定装置考察了超薄膜的摩擦学性能 ,采用扫描电子显微镜对薄膜的磨痕表面进行了观察 .结果表明 ,所制备的超薄复合沉积膜具有良好的减摩和耐磨性能     

Metal complexes of a homopolymer system containing diethanolamine side group: synthesis and dielectrical behaviors

In this work, 4-diethanolaminomethyl styrene (DEAMSt) monomer was prepared by modification of 4-chloromethyl styrene with diethanolamine. The homopolymerization of styrene modificated was carried out by free radical polymerization method at 60?°C in presence of 1,4-dioxane and AIBN. The metal complexes were prepared by reaction of the homopolymer used as ligand P(DEAMSt)L^l and Ni(II), Co(II) metal ions in presence of ethanol and dilute NaOH at 65?°C for 48?h in pH 6.

The structure of modificated monomer, homopolymer used as ligand and polymer-metal complexes were characterized by (FT-IR), ¹H-NMR, ¹³C-NMR, Raman spectroscopy tecniques, elemental analysis, SEM, XRD and magnetic measurements. Their geometric structures according to magnetic measurements of Co(II) and Ni(II) complexes were estimated that have a tetrahedral structure. P(DEAMSt)L^l polymer has a transition state between amorphous and crystalline, whereas metal complexes (Co(II) and Ni(II) are with a large crystal structure. The molecular weight of P(DEAMSt)L¹ homopolymer was determined by gel permeation chromatography (GPC). The glass transition temperature (Tg) of homopolymer was measured by differantial scanning calorimeter (DSC). The thermal behaviors of both ligand and polymer-metal complexes were investigated by thermogravimetric analysis (TGA) and (DTA). The results obtained were compared with each other. Then, the dielectrical measurements (dielectric constant, dielectric loss and conductivity) of the ligand and polymer-metal complexes were investigated as a function of temperature and frequency. The activation energies (Ea) of the ligand and metal complexes were determined from the conductivity measurements.     

Functionalization of chitosan with 3-nitro-4-amino benzoic acid moiety and its application to the collection/concentration of molybdenum in environmental water samples

A chitosan resin functionalized with 3-nitro-4-amino benzoic acid moiety (CCTS-NABA resin) was newly synthesized for the collection/concentration of trace molybdenum by using cross-linked chitosan (CCTS) as base material. The carboxyl group of the moiety was chemically attached to amino group of cross-linked chitosan through amide bond formation. The adsorption behavior of molybdenum as well as other 60 elements on the resin was examined by passing the sample solutions through a mini-column packed with the resin. After the elution of the elements collected on the resin with 1 M HNO₃, the eluates were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) and atomic emission spectrometry (ICP-AES).

The CCTS-NABA resin can adsorb several metal ions, such as vanadium, gallium, arsenic, selenium, silver, bismuth, thorium, tungsten, tin, tellurium, copper, and molybdenum at appropriate pHs. Among these metal ions, only molybdenum could be adsorbed almost completely on the resin at acidic regions. An excellent selectivity toward molybdenum could be obtained at pH 3–4. The adsorption capacity of CCTS-NABA resin for Mo(VI) was 380 mg g⁻¹ resin. Through the column pretreatment, alkali and alkaline earth metals in river water and seawater samples were successfully removed.

The CCTS-NABA resin was applied to the adsorption/collection of molybdenum in river water and seawater samples. The concentrations of molybdenum in river water samples were found in the range of 0.84 and 0.95 ppb (ng g⁻¹), whereas molybdenum in seawater was about 9 ppb. The validation of the proposed method was carried out by determining molybdenum in the certified reference materials of SLRS-4, CASS-4, and NASS-5 after passing through the CCTS-NABA resin; the results showed good agreement with the certified values.     

High-temperature transformations of Cu-rich hydrotalcites

CuM(II)Al ternary hydrotalcites (M(II) = Ni, Co and Mg) with a (Cu+M(II))/Al atomic ratio of 3.0 and Cu/M(II) atomic ratio of 5.0 were synthesized by coprecipitation under low supersaturation. Powder X-ray diffraction of the as-synthesized samples showed a pattern characteristic of hydrotalcite-like (HT-like) structure (JCPDS: 41-1428). Thermal analyses of these samples showed four stages of weight loss/heat change when recorded in nitrogen. Analysis of the evolved gases characterized the nature of these transformations. The thermoanalytical effects differed significantly especially for the high-temperature transformations, when the treatment was performed in oxygen. In situ powder X-ray diffraction of the samples was carried out to elucidate the phase evolution of these compounds. Surprisingly formation of CuO was noted at temperatures around 200°C well below the destruction of the layered network. The nature of the resulting phases varied with both the nature of the co-bivalent metal ion and the heating atmosphere. FT-IR spectroscopy confirmed the retention of carbonate ions at higher temperatures (above 700°C), although the concentration of carbonate anion (most likely unidentate) varied with the calcination temperature. The crystallinity of CuO increased significantly above 600°C, probably through dissociation of copper oxycarbonate. Significant differences in the thermal transformation temperatures (for the third and the fourth transformations) of these samples containing different co-bivalent metal ions were not observed. This suggests that an association of the co-bivalent metal ions and/or trivalent metal ion in this phase is unlikely. A plausible thermal evolution scheme of these hydrotalcites is proposed.     

相反转技术制备环氧树脂水基体系——相反转过程的流变行为研究

对高乳化剂浓度下的相反转发展过程的流变行为进行了应力扫描、动态频率扫描实验表征．结果表明，乳化剂浓度较高时，体系发生完全相反转；体系在相反转点前为Ｗ／Ｏ结构，其粘度几乎不随剪切应力的改变而改变，表现为牛顿流体行为；体系在相反转点后为Ｏ／Ｗ结构，具有很高的粘弹性，并且在较高剪切应力下表现为典型的假塑性．这是由于高分子水基微粒间通过其表面覆盖的表面活性剂与水形成氢键而产生了一种静态结构，此结构在较高剪切应力作用下破坏而导致假塑性．     

The structural phase transitions of aminoguanidinium(1+) dihydrogen phosphate—study of crystal structures, vibrational spectra and thermal behavior

Aminoguanidinium(1+) dihydrogen phosphate was prepared by crystallization from aqueous solution. On the basis of the results of DSC measurements, X-ray structural analysis was carried out at temperatures of 160, 215 and 293 K for three aminoguanidinium(1+) dihydrogen phosphate phases ( |Z=2|non-ferroic |melting point 408 K; II |201-222 K|(2) |Z=2|non-ferroic|-; III |<201 K|(2)|Z=4|non-ferroic|-). The triclinic unit cell dimensions (a=6.8220(2), b=7.1000(2), c=7.4500(2) Å, α=86.925(2)°, β=80.731(2)°, γ=79.630(2)°, V=350.21(2) Å³—phase I) are similar for all three structural phases with the exception of phase III, where doubling of the c-axis length leads to an increase in the volume to 692.34(3) Å³. The crystal structure of all three modifications consists of parallel layers of dihydrogen phosphate anions that are interconnected by aminoguanidinium(1+) cations through hydrogen bonds of the N-H…O type. The planar aminoguanidinium(1+) cations are oriented almost parallel to each other and are perpendicular to the anion layers. The primary differences amongst phases I, II and III lie in the location of the H atom in the short O-H…O bonds connecting the dihydrogen phosphate anions in layers. The FTIR and FT Raman spectra of natural and deuterated compounds were recorded and interpreted. The FTIR spectra were studied down to a temperature of 90 K.     

Tricarbonyl(N,N-Disubstituted-Cyclohexadienecarboxamide)iron Complexes: Investigation of the Possible Intramolecular Interaction between the Iron Center and the Amide Substituent

Direct reaction of iron pentacarbonyl with 1-N,N-disubstituted-cyclohexa-2,5-dicnecarboxamide and 1-N,N-disubstituted-cyclohexa-1,3-dienecarboxamide mixture (in which the disubstkuted group is diethyl or diphenyl) gave the isomeric tricarbonyl iron complexes of 2-N,N-disubstituted-1,4-η-cyclohexa-1,3-dienccarboxamide (1), 1-N,N-disubslituted-1,4-η-cyclohexa-1,3-dienecarboxamide (2), and 5-N,N-disubstituted-1,4-η-cyclohexa-1,3-dienecarboxamide (3) and tricarbonyliron complexes of l-N,N-disubstituted-cyclohexenecarboxamide (4). These complexes were separated and characterized by IR, UV-VIS, ¹H NMR, elemental analysis, and mass spectra. Only 1 isomerized to give 2 under acidic conditions; both 1 and 2 undergo hydride abstraction with triphenylmethyl hexafluorophosphatc. Complexes 3, undergo neither isomcrization nor hydride abstraction. According to the spectral data, the possible interaction between carboxamide and iron carbonyl moiety was investigated. The irreversible electrochemical behavior of these complexes were studied.