超声跟踪法制作误差对器件性能的影响及补偿

研究发现快模入射超声跟踪氧化碲器件的布喇格损耗频响对于参数误差十分敏感,因而制作误差可能对器件性能有较大影响。本文系统研究了这种影响及其补偿方法,结果表明,当相邻两换能片之间中心距S有5%的误差和声偏置角丫_0有10%的误差时,通过调整入射角θ_1可作出完全的补偿。     

多电子束契伦柯夫自由电子激光振荡器

我们对多电子束契伦柯夫自由电子激光进行了首次实验研究。280A,500kV的电子束被引入一多介质矩形谐振腔,在频率为33.4GHz处产生了1.7MW的契伦柯夫相干受激辐射。互作用效率为1.2％。     

Development of a finite-element analysis methodology for the propagation of delaminations in composite structures

Analysing the collapse of skin-stiffened structures requires capturing the critical phenomenon of skin-stiffener separation, which can be considered analogous to interlaminar cracking. This paper presents the development of a numerical approach for simulating the propagation of interlaminar cracks in composite structures. A degradation methodology was introduced in MSC.Marc, which involved the modelling of a structure with shell layers connected by user-defined multiple-point constraints (MPCs). User subroutines were written that employ the virtual crack closure technique (VCCT) to determine the onset of crack growth and modify the properties of the user-defined MPCs to simulate crack propagation. Methodologies for the release of failing MPCs are presented and are discussed with reference to the VCCT assumption of self-similar crack growth. The numerical results obtained by using the release methodologies are then compared with experimental data for a double-cantilever beam specimen. Based on this comparison, recommendations for the future development of the degradation model are made, especially with reference to developing an approach for the collapse analysis of fuselage-representative structures. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 1, pp. 15–42, January–February, 2007.     

热场致发射电子源曝光系统的技术现状和应用前景

高亮度、长寿命的热场致发射(Thermal field emitter)阴极自七十年代中期已受到人们的关注和重视,历经十多年在理论分析、工艺制备和实验研究上做了大量工作之后,于1988年在电子束曝光机上的应用中取得了突破性进展。用晶向为(100)的钨和具有低逸出功的锆制成的(Zr/O/W)热场致发射阴极在四千小时的使用寿命下亮度值超过六硼化镧阴极一个数量级以上,最近的实验结果表明:在工件台上小束斑下能得到接近两千安培每平方厘米的束流密度,而且四十小时内束流稳定度接近千分之一。显然,这几个表征曝光系统综合技术性能的重要指标,说明多年困扰于各种电子束曝光系统(特别是高斯圆斑电子束系统)在高分辨率情况下生产率较低的技术难题已经得到了比较圆满的解决。 八十年代末期,当热场致发射电子源曝光系统的技术关键解决后,这项技术就成为技术发达国家,特别是美国和日本,在电子束曝光领域进行技术竞争的热点;九一年五月底在美国召开的国际三束会议上有关场致发射阴极和MEBES—4型机已经采用TFE的最新报道充分证实了这项技术在电子束曝光技术应用中的重要地位和发展潜力。     

DX centers in AlxGa1-xAs bulk alloy,AlAs/GaAs ordered,and disordered superlattices

Properties of theDX centers in Al_0.5Ga_0.5As bulk alloy (b-AL), (AlAs)₂ (GaSa)₂ ordered superlattice (o-SL) and (AlAs) _m (GaAs) _n disordered superlattice (d-SL) (m = 1, 2, 3,n = 1, 2, 3) with the same macroscopic composition were measured and compared. By deconvolution of deep level transient spectroscopy (DLTS) spectrum due to theDX center, we have found a decrease in the number of separate peaks in DLTS spectrum in an intentionally atomic ordered arrangement. Visiting Scholar of the Japan Society for the Promotion of Science. On leave from Department of Electrical Engineering, San Jose State University, San Jose, California 95192-0084, USA.     

激光光束质量因子的研究进展

本文详细分析了各种光场下光束质量M2因子。在不同的场中,A.E.Siegman当初所定义的M2因子,已经有了很大的变化,因而M2因子的特性也与当初不同,不仅M2因子可以大于等于1,而且可以小于1,甚至小于0。其反映的物理意义,也从经典场中的衍射极限倍数,变化为非经典场中的准直性量度以及对空间相干性的某些反映。此外还列举并分析了几种特殊的光束质量因子,最后讨论了M2因子应用的问题并指出了其局限性。     

三级近似束流光学计算程序

为了精确计算束流在离子光学系统中的传输,用Visual FORTRAN 6.5语言编写了一个计算程序,长约13000行. 此程序可以计算由三圆筒单透镜、三膜片单透镜、双元筒透镜、均匀场静电加速管、磁四极透镜、六极磁铁、静电四极透镜、偏转磁铁、螺线管透镜、ExB~正交电磁场分析器、静电偏转器、漂浮管、QWR(Quarter Wave Resonators)和SLR(Split Loop Resonators)射频加速元件等元件任意组成的离子光学系统. 粒子轨迹的计算可精确到三级近似. 粒子的分布类型也可以有多种选择. 程序具有最优化计算功能,即可以自动调整元件的参数,以实现所需要的光学条件. 各元件之后的横向和纵向相图以及系统的束流包络线以图形方式显示在屏幕上.     

Beam Combination using Stimulated Brillouin Scattering for the Ultimate High Power-Energy Laser System Operating at High Repetition Rate over 10 Hz for Laser Fusion Driver

After the laser was invented in 1960, a phase conjugation mirror has been respected to be the most fantastic one for the laser resonator composition because it can compensate any distortions of the laser beams occurred by the many inhomogenuities of the laser media and optical components. Among the many phase conjugation configurations, the stimulated Brillouin scattering phase conjugation mirror is the most simple one and many researchers have tried to utilize it to develop high power/energy laser systems. For realizing a high energy/power laser system the thermal problem is the most difficult to solve, and some researchers suggested a beam combination technique to reduce the thermal load of the big laser media to many small sized ones. To accomplish the beam combination using stimulated Brillouin scattering phase conjugation mirrors (SBS-PCMs), it is necessary to lock/control the phases of the SBS-PCMs. And some researchers have developed several ways for it, but they can lock the phases of a limited number of beams overlapped at the foci less than 5, or lock the phases by back-seeding technique but it loses the phase conjugation characteristics. For realization of the laser fusion driver, it is necessary to combine more than 10 or 100 beams. And the authors have developed recently a new phase controlling/locking technique which is isolated and independent totally from other beams and it can be applied to an unlimited number of beams in principle.     

Smaller Output Beam Divergence in the Slowly Opened Q-Switch Operation

The mechanism of the slowly opened Q-switch operation was investigated thoroughly. Maximum energy extraction from the resonator could be optimized, and the smallest output beam divergence could be achieved. In this article, we present a detailed analysis that has numerically verified the mode-selection mechanism in the slowly opened Q-switch operation, and the degree of the smaller output laser beam divergence that has been achieved. The mechanism of the slowly opened Q-switch operation is the inherent advantage of the passive saturable absorber in this operation. We can use the maximum energy extraction and the smallest output beam divergence results of the slowly opened Q-switch operation to design and optimize various passive saturable absorbers: plastic dye sheets, LiF:F₂⁻ color center crystals, Cr4⁺: YAG crystals, RG1000 color glass filters, and the single crystal semiconductor saturable absorber wafers that are in developed in our microchip laser systems.     

微型硅谐振式力传感器的振动分析

介绍了谐振式力传感器的工作原理，并从理论上和实验上对中科院合肥智能所研制的第一代微型硅谐振梁（３×０．４×０．０４５ｍｍ＾３）式测力传感器进行了全面的振动分析，所得结构为其进一步优化设计提供了科学根据，文中使用的实验分析方法，为其它微小物体的动态和识别提供了一条有效途径。