一种适用于板料成形过程分析的自适应有限元方法

本文主要讨论在板料成形过程的动态显式有限元分析中,有限元网格的丙分割技术。单元为四节点壳单元,板料的材料特性假定满足Ｈｉｌｌ各向异性的弹塑性准则,采用自适应ｈ－方案,通过细化和聚合单元调整网格的疏密,模具被假定为由刚性小平面组成,与同一单元的节点发生接触处的模具表面的法线之间的夹角作为单元再分的判据。通过对方表盒冲压成形过程的计算,说明该方法是有效的。     

变速度轴向运动粘弹性梁的动态稳定性

研究速度变化的轴向运动粘弹性梁在亚谐波共振及组合共振范围内的参数振动．通过平均法,在运动参数激励频率为2倍固有频率或为两阶固有频率之和附近时得到了自治的常微分方程组．在参数激励频率和激励振幅平面上,可以找到由于共振而产生的失稳区域,并应用数值方法验证了理论推导结果的正确性．分析了粘弹性阻尼,速度和预紧张力对失稳区域的影响．粘弹性阻尼使得共振失稳区域减小,而速度和预紧张力使共振失稳区域在频率-振幅平面上发生漂移．     

梁受正弦分布压力作用的解析解

对梁受正弦分布压力作用的情况，本文以矩形截面简支梁为例，通过构造满足所有边界条件和双调和方程的应力函数给出了相应的解析解，这为求解梁受任意分布压力作用的解的问题打下了基础。     

Well‐posedness of the equations governing the motions of a one‐dimensional hybrid thermo‐elastic structure

In this paper a model for the vibrations of a one‐dimensional hybrid thermo‐elastic structure consisting of an extensible thermo‐elastic beam which is hinged at one end, with a rigid body attached to its free end, is studied with a view to establishing the existence of a unique solution in a weak sense. The model takes account of the effect of stretching on bending and rotational inertia. By treating eigenvalue problems with the spectral parameter also in the boundary conditions, we are able to employ the method of Faedo–Galerkin approximations. Copyright © 2004 John Wiley & Sons, Ltd.     

带参数悬臂梁问题的单增正解

讨论了带有参数的悬臂梁方程u(4)(t)=λf(t,u(t)),0相似文献   

时滞速度反馈作用下弹性梁的主共振分析

采用时滞速度反馈控制策略对轴力作用下的弹性梁进行振动控制.根据Newton第二定律建立压电耦合弹性梁的非线性振动控制模型,运用直接法得到时滞反馈作用下弹性梁主共振的一阶近似解,得出系统响应与控制参数的关系.结果表明,主共振的响应存在多解和跳跃现象,调节控制增益和时滞值可以有效抑制大幅振动.     

Development of a finite-element analysis methodology for the propagation of delaminations in composite structures

Analysing the collapse of skin-stiffened structures requires capturing the critical phenomenon of skin-stiffener separation, which can be considered analogous to interlaminar cracking. This paper presents the development of a numerical approach for simulating the propagation of interlaminar cracks in composite structures. A degradation methodology was introduced in MSC.Marc, which involved the modelling of a structure with shell layers connected by user-defined multiple-point constraints (MPCs). User subroutines were written that employ the virtual crack closure technique (VCCT) to determine the onset of crack growth and modify the properties of the user-defined MPCs to simulate crack propagation. Methodologies for the release of failing MPCs are presented and are discussed with reference to the VCCT assumption of self-similar crack growth. The numerical results obtained by using the release methodologies are then compared with experimental data for a double-cantilever beam specimen. Based on this comparison, recommendations for the future development of the degradation model are made, especially with reference to developing an approach for the collapse analysis of fuselage-representative structures. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 1, pp. 15–42, January–February, 2007.     

压电弯曲元的夹层梁解析模型

压电弯曲元是一类传感和作动器件,已得到广泛的应用．基于一阶剪切变形理论发展了压电弯曲元夹层梁解析模型,对梁截面采用统一转角并将耦合电势沿厚度的分布假设为二次函数,进一步修正了横向剪应变对电位移的影响．以弯曲元简支梁自由振动为例进行数值分析,解析模型解与二维精确解相比具有良好的精度,为分析弯曲元动力机电响应提供了良好的解析模型．     

Almost sure and moment Lyapunov exponents for a stochastic beam equation

The transverse vibrations of an Euler-Bernoulli beam with axial tension P and axial white noise forcing are given by

     

Numerical Approximation and Error Analysis for the Timoshenko Beam Equations with Boundary Feedback

In this paper,the numerical approximation of a Timoshenko beam with bound- ary feedback is considered.We derived a linearized three-level difference scheme on uniform meshes by the method of reduction of order for a Timoshenko beam with boundary feedback.It is proved that the scheme is uniquely solvable,unconditionally stable and second order convergent in L_∞norm by using the discrete energy method. A numerical example is presented to verify the theoretical results.