Glass capillary columns for separation of free organic acids

Glass capillary columns have been prepared without acidic additive in the stationary phase, from which free organic acids elute as sharp and symmetrical peaks. The required surface in the borosilicate glass capillary was generated by a combination of leaching with aqueous HCl and deposition of colloidal silica particles; it can be coated with stationary phases have a broad range of polarity. Aqueous samples containing free organic acids can also be analyzed in such columns in an isothermal mode.     

Bifunctional pyridyl alcohols with the bicyclo[3.3.0]octane scaffold in the asymmetric addition of diethylzinc to aldehydes

Some new pyridyl alcohols with the cis-bicyclo[3.3.0]octane scaffold were synthesized and used as chiral ligands for the enantioselective addition of diethylzinc to aldehydes. Ligands 4 were found to be far superior to the C₂-symmetric ligands 2 in terms of enantioselectivities. Quantitative yields and enantiomeric excesses of up to 92% were obtained when the ligand 4 was used. The carbonyl function in 4 proved to be beneficial for the high enantioselectivities in the addition of diethylzinc to aldehydes. Conversion of the carbonyl group into oxime or oxime ether group led to a sort of more active ligands, which catalyzed the same reaction with rate acceleration.     

Kinetic modelling of cadmium removal from phosphoric acid by non-dispersive solvent extraction

In this work it is reported that the kinetic modelling of the separation of cadmium from phosphoric acid by non-dispersive solvent extraction. Using Cyanex 302 as selective extractant, the extraction step was carried out in a hollow fibre module containing polypropylene fibres, whereas the concentration step required a ceramic module with tubular channels due to the high acidity of the backextraction agent. Application of the methodology previously reported by the authors led to the development of a kinetic model with three design parameters, i.e., equilibrium constant of the extraction reaction (K'_e = 6 × 10³ mol⁻²/l⁻²), membrane mass transport coefficient of the extraction module K_me=8.33×10⁻⁸ m/s) and of the backextraction module (K_ms=3.33×10⁻⁸ m/s), that described satisfactorily the behaviour of the separation-concentration system. Thus, in this work a new application of the non-dispersive solvent extraction technology is presented, characterising at the same time the behaviour and parameters of a new type of contactor, i.e., a tubular ceramic module.     

聚碱性品红修饰电极的制备及应用

研究了碱性品红在玻碳电极上聚合的最佳实验条件及其聚合机理，发现该修饰电极的多巴胺具有良好的催化作用，能大大提高多巴胺在的玻碳电极上的响应，在ｐＨ＝７．０的磷酸盐缓冲溶液中，用修饰电极测定巴胺的线性范围为２×１０＾－７～１×１０＾－５ｍｏｌ／Ｌ，检测限为１×１０＾－７ｍｏｌ／Ｌ，并且具有稳定性好，响应快，选择性等特点。     

微波法研制碱土金属氧化物负载型MCM-48碱性介孔材料

以立方相介孔分子筛MCM-48为载体,用微波辐射分散MgO或CaO和醋酸镁溶液浸渍等方法研制碱性介孔材料。MCM-48能经受微波辐射,负载碱性客体之后也保持介相结构。异丙醇分解探针反应表明:载体本身没有碱催化活性,而碱性MCM-48介孔材料的活性随温度升高而提高。本文还对介孔材料在微波分散和碱性催化方面的特点进行分析。     

Thermal decomposition of basic cobalt and copper carbonates

Basic cobalt and copper carbonates were prepared by precipitation from solutions of their nitrates using KHCO₃ at room temperature in CO₂ atmosphere. The thermal decomposition of the prepared basic carbonates was studied by means of TG and DTA techniques and the phases produced were identified by XRD measurements. The products obtained at 400C were subjected to different doses of gamma-rays (40–160 M rad) and the thermal stabilities of these solids were investigated.The results obtained revealed that basic cobalt carbonate decomposed at 335C to produce Co₃O₄ which remained stable up to 850 and then decomposed above this temperature giving CoO which transformed into Co₃O₄ on cooling to room temperature. Basic copper carbonate dissociated at 290C yielding CuO which yielded Cu₂O and metallic copper at 1060 and 1150C, respectively. However, the produced cuprous oxide and metallic copper solids were converted into CuO and CU₂O, respectively by cooling in air to room temperature.Gamma-irradiation decreased the thermal stability of Co₃O₄ to an extent proportional to the dose employed. On the other hand, this treatment increased the thermal stability of both CuO and Cu₂O.     

Modular design of icosahedral metal clusters

The concept of crystalline module, that is, an unambiguously isolated, repeated quasi-molecular element, is introduced. This concept is more general than the concept of crystal lattice. The generalized modular approach allows extension of the methods and principles of crystallography to quasi-crystals, clusters, amorphous solids, and periodic biological structures. Principles of construction of aperiodic, nonequilibrium regular modular structures are formulated. Limitations on the size of icosahedral clusters are due to the presence of spherical shells with non-Euclidean tetrahedral tiling in their structure. A parametric relationship between the structures of icosahedral fullerenes and metal clusters of the Chini series was found.     

微视频技术在基础化学实验教学中的实践应用

以高校基础化学实验"从海带中提取碘""三草酸合铁（Ⅲ）酸钾的制备"为例，分别探讨了微视频技术在化学基本操作实验和综合设计型实验中的具体应用；此外，举例说明利用Flash软件制作的虚拟微视频可以在仪器分析实验中清晰地再现仪器真实操作中的每一个步骤，弥补了学生在实验前无法实际操作仪器的不足。实践证明，微视频技术的应用，丰富了基础化学实验教学模式，增强了学生自主学习的能力和动手能力，提高了实验成功率和实验教学效果。     

Lewis碱性混合萃取剂碱度的测定

提出一种利用萃取法间接测定Lewis碱性萃取剂碱度的简便方法, 选择常用的Lewis碱性萃取剂TOA/正辛醇和TRPO/煤油, 测定了其碱度, 为今后络合萃取剂的选择及其机理的研究提供理论指导.     

无烟煤结构的高分辨电镜研究

镜质组不仅是煤结构变化最具规律性，也是影响煤质的主要微成分。用点分辨率为２．１Ａ的高分辨电镜对几种不同煤化程度的无烟煤大分子结构进行了研究。结果表明：电镜图像直接表征了无烟煤分子的非均匀性孔隙结构。京西煤分子方向化程度强，主要以芳层平行堆或有序化前结构为主；晋城煤方向化程度弱，主要以粒状嵌晶结构为主。高分辨电镜技术是研究煤分子结构和煤化作用实质的有效方法。