Preparation and electrical characterization of (PVC + KBrO3) polymer electrolytes for solid state battery applications

This paper presents results of studies on dc electrical conductivity and transference number measurements on potassium bromate (KBrO₃) complexed polyvinyl chloride (PVC) films prepared by solution cast technique. Temperature dependence of dc electrical conductivity and transference number data indicated the dominance of ion type charge transport in these specimens. The magnitude of conductivity increased with increase in concentration of the salt and temperature. Using this (PVC + KBrO₃) electrolyte, solid-state electrochemical cells were fabricated, and their discharge profiles were studied under a constant load of 100 kΩ. Several cell profiles such as open circuit voltage, short circuit current, power density, and energy density associated with these cells were evaluated and were reported. The features of complexation of the electrolytes were studied by X-ray diffraction and Fourier transform infrared spectroscopy. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006     

Studies on calcium‐containing poly(urethane ether)s

The calcium salt of mono(hydroxyethoxyethyl)phthalate [Ca(HEEP)₂] was synthesized by the reaction of diethylene glycol, phthalic anhydride, and calcium acetate. Calcium‐containing poly(urethane ether)s (PUEs) were synthesized by the reaction of hexamethylene diisocyanate (HMDI) or tolylene 2,4‐diisocyanate (TDI) with a mixture of Ca(HEEP)₂ and poly(ethylene glycol) (PEG₃₀₀ or PEG₄₀₀) with di‐n‐butyltin dilaurate as a catalyst. A series of calcium‐containing PUEs of different compositions were synthesized with Ca(HEEP)₂/PEG₃₀₀ (or PEG₄₀₀)/diisocyanate (HMDI or TDI) molar ratios of 2:2:4, 3:1:4, and 1:3:4 so that the coating properties of the PUEs could be studied. Blank PUEs without calcium‐containing ionic diols were also prepared by the reaction of PEG₃₀₀ or PEG₄₀₀ with HMDI or TDI. The PUEs were well characterized by Fourier transform infrared, ¹H and ¹³C NMR, solid‐state cross‐polarity/magic‐angle‐spinning ¹³C NMR, viscosity, solubility, and X‐ray diffraction studies. The thermal properties of the polymers were also studied with thermogravimetric analysis and differential scanning calorimetry. The PUEs were applied as top coats on acrylic‐coated leather, and their physicomechanical properties were also studied. The coating properties of PUEs, such as the tensile strength, elongation at break, tear strength, water vapor permeability, flexing endurance, cold crack resistance, abrasion resistance, color fastness, and adhesive strength, were better than the standard values. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2865–2878, 2003     

Effects of Moisture and Stresses on the Structure and Properties of Polyester Resin

The results of a complex study of structural changes in a cured Norpol 440 polyester resin under the action of damp environment and mechanical loading are presented. A considerable effect of absorbed moisture on the structure and some characteristics of the material is revealed by using thermophysical methods and X-ray diffractometry. The joint effect of moisture and mechanical stress is estimated by investigating the creep in stationary and nonstationary moisture conditions. The anisotropy of the material structure formed during creep is evaluated from the results of dilatometric measurements. It is found that the degree of anisotropy of the material after creep accompanied by moisture sorption is higher than that after creep in the conditions of moisture equilibrium with atmosphere. It is established that the aftercure and relaxation of the residual creep deformation come to an end at heating to 80-85°C. At a further rise in temperature and repeated heating, changes in the material structure are not observed.     

Stratifiable Families of Extremals and Sufficient Conditions for Optimality in Optimal Control Problems

It is shown that, if a parametrized fämily of extremals F can be stratified in a way compatible with the flow map generated by F, then those trajectories of the family which realize the minimal values of the cost in F are indeed optimal in comparison with all trajectories which lie in the region R covered by the trajectories of F. It is not assumed that F is a field covering the state space injectively. As illustration, an optimal synthesis is constructed for a system where the flow of extremals exhibits a simple cusp singularity.     

马科维兹资产组合选择模型的旋转算法

提出线性不等式组的一种旋转算法，并用其求解马科维兹资产组合选择模型，此算法每次迭代约需n^2次乘法和加法，其中n是模型中变量的数目，在微机上运行Delphi程序的实验结果表明，从上海和深圳股市1072支股票70期周末收盘价计算出20个最优投资组合仅需314次迭代和45s。     

掺杂铁电纳米粉的液晶的电光特性

铁电纳米粒子悬浮在向列相液晶母体中，增强介电各向异性，而且对施加的电场信号敏感。本文也展示了纳米粒子对所述复合材料可实现的总的相变的作用。这种方法也许可应用于设计新型显示材料。     

无线网状网技术与应用

无线网状网(WMNs)由网状路由器节点和客户机节点组成,其中的网状路由器节点组成了无线网状网的网络骨干,其移动性很小。他们一起为无线网状网和其他常规无线网络的客户机节点提供网络的无线接入。WMNs技术结合了中心式控制的蜂窝网与分布式控制的无线自组织网的优点,可有效克服这两种技术的缺陷并显著提高无线网络的性能,已经成为下一代无线通信网络的研究热点之一。WMNs可为无线个域网、局域网、校园网、城域网的一系列应用提供高速无线宽带接入服务。虽然目前WMNs技术发展很快,但其协议栈各层仍存在许多有待研究的课题。首先简要介绍了无线网状网的结构与特点;随后重点分析了其主要的几个应用领域;最后探讨了WMNs各协议层的研究现状与关键技术,并分析了该技术存在的问题及未来的研究方向。     

应变Si1-xGex层中p型杂质电离常温和低温特性

本文采用解析的方法计算了应变Si1-xGex层中p型杂质电离度与Ge组分x、温度T以及掺杂浓度N的关系.发现常温时,在同一Ge组分下,随着掺杂浓度的升高,杂质的电离度的先变小,而后又迅速上升到1.在同一掺杂浓度下,轻掺杂时,杂质的电离度随Ge组分的增加先变大,而后几乎不变;重掺杂时,杂质电离能变为0后,杂质电离度为1.低温下,轻掺杂时,载流子低温冻析效应较为明显,杂质的电离度普遍较小,当掺杂浓度大于Mott转换点时,载流子冻析效应不再明显,电离率迅速上升到1.在同一Ge组分下,随着掺杂浓度的升高,杂质的电离度先变小,后变大,而后又迅速上升到1.在同一掺杂浓度下,轻掺杂时,杂质的电离度随Ge组分的增加变大;重掺杂时,杂质电离能变为0后,杂质电离度为1.     

Stability of solutions to the Cauchy problem for a plane hyperbolic system with time-periodic coefficients

Considering a plane hyperbolic system with time-periodic coefficients, we construct a version of the direct Lyapunov method with the condition on the derivative of the Lyapunov functional along the trajectories of the system which is weakened by use of periodicity of the coefficients. We exhibit an illustrative example.     

偏振模色散统计特性的研究

利用动态方程研究了偏振模色散矢量的统计特性 ,分别用统计系综和频率系综两种方法进行数值模拟。数值结果表明 ,统计系综和频率系综两种方法的结果一致。在大归一化距离条件下 ,均方根时延的平方随归一化距离线性变化 ;偏振模色散矢量的各个分量服从高斯分布 ,差分群时延服从麦克斯韦分布 ;偏振模色散矢量弥散于整个邦加球