A simple and simultaneous determination of acyclovir and ganciclovir in human plasma by high-performance liquid chromatography

A simple high-performance liquid chromatographic method was developed for the simultaneous determination of the therapeutic levels of acyclovir and ganciclovir in human plasma. After precipitation of plasma proteins with 6% perchloric acid, acyclovir and ganciclovir were simultaneously determined by reversed-phase chromatography with spectophotometric detection at 254 nm. The peak heights for acyclovir and ganciclovir were linearly related to their concentrations ranging from 0.063 to 2.080 micro g/mL. The recovery was 100.48-102.84% for acyclovir and 99.26-103.07% for ganciclovir. The intra- and inter-day relative standard deviation values were in the range 0.186-8.703% for acyclovir and 0.137-6.424% for ganciclovir. The detection limits for both compounds were 0.01 micro g/mL determined as the signal-to-noise ratio of 3. The present method is applicable to therapeutic monitoring during antiviral medication.     

透明导电玻璃(ITO)基材自加热传感静态芯片聚合酶链反应(PCR)

利用商品化ITO玻璃导电层的温阻效应, 无需任何微加工手段, 实现了自加热和传感的芯片温度自动程序控制, 最大程度地减小了传感滞后对温度控制稳定性的影响, 温度控制的稳定性达到了0.2 ℃, 升温速度最快可达20 ℃/s以上, 在冷却风扇辅助下降温速度最快达到了8 ℃/s. 芯片温控单元的引线从传统的两对(一对用于传感, 一对用于加热)减少为一对. 通过在该芯片上直接构建多个开放微池反应器的方法成功地实现了λDNA 157 bp片段的并行扩增. 将该芯片置于倒置荧光显微镜样品台上, 以蓝色(575 nm)发光二极管为光源, 以光电倍增管为检测手段检测了dsDNA和SYBR Green Ⅰ嵌合物的荧光强度随温度的实时变化曲线.     

工业废水中微量铜（Ⅱ）和氰化物的流动注射光度分析

采用ＦＩＡ技术，以光度比色法为基础，建立了工业废水中微量Ｃｕ＾２＋和ＣＮ＾－的顺序自动分析方法和装置。其对二种离子的测定频率为６０样／ｈ，相对标准偏差＜１．０％，工作曲线的ｒ值≥０．９９９，各项分析技术指标均优于手工法操作。     

Continuous pH monitoring during pretreatment of yellow poplar wood sawdust by pressure cooking in water

Yellow poplar wood sawdust consists of 41% cellulose and 19% hemicellulose. The goal of pressure cooking this material in water is to hydrate the more chemically resistive regions of cellulose in order to enhance enzymatic conversion to glucose. Pretreatment can generate organic acids through acid-catalyzed degradation of monosaccharides formed because of acids released from the biomass material or the inherent acidity of the water at temperatures above 160°C. The resulting acids will further promote the acid-catalyzed degradation of monomers that cause both a reduction in the yield and the formation of fermentation inhibitors such as hydroxymethyl furfural and furfural. A continuous pH-monitoring system was developed to help characterize the trends in pH during pretreatment and to assist in the development of a base (2.0 M KOH) addition profile to help keep the pH within a specified range in order to reduce any catalytic degradation and the formation of any monosac-charide degradation products during pretreatment. The results of this work are discussed.     

Preservation of sensitive CRMs and monitoring their stability at IRMM

Over the years, the nature of CRMs has changed considerably. Recently, more and more CRMs have been certified in their "natural" form, that is processed as little as possible, with analytes at their natural concentration level. This and the trend towards certified properties other than the concentrations of clearly defined molecules/elements have made guaranteeing stability of CRMs and estimating a shelf life an even more important issue for reference material producers than it has been before. One way to meet this challenge is to take more care in processing, storage and dispatch of CRMs. At IRMM, approximately 20 % of the RMs are stored at –20 °C or below and about 10% require cooled transportation. In addition, increased efforts for assessing stability are needed. Shelf lives are estimated using addition of an uncertainty component based on real-temperature stability studies rather than by accelerated stability studies. These pre-certification efforts are complemented by a stability-monitoring program, which at IRMM includes 80 % of the non-nuclear and non-isotopic materials. Although the costs for these efforts are high in absolute terms, they are only a minor and indispensable contribution to the total costs of CRM production.     

Direct determination of estriol 3- and 16-glucuronides in pregnancy urine by column-switching liquid chromatography with electrospray tandem mass spectrometry

Using column-switching liquid chromatography/tandem mass spectrometry (LC-MS/MS), we developed an improved analytical method of urinary estriol glucuronides. This new method is derived predominantly from maternal and fetal precursors in pregnancy. We used in the following procedure: first, we filtered urine samples with a membrane filter. Next, we directly injected the 50 microL aliquot of urine samples onto a pre-column. Then, after activating the column-switching valve, we backflushed the loaded samples onto the C(18) analytical column. Urine samples can be assayed within 20 min without any sample preparation steps. We monitored separated estriol glucuronides by negative electrospray ionization (ESI) and selected-reaction monitoring (SRM). The calibration range of estriol-3-glucuronide (E3-3G) and estriol-16-glucuronide (E3-16G) was 0.1-20 microg/mL and the linearity of the method was 0.9984 for E3-3G and 0.9987 for E3-16G. The limits of detection at a signal-to-noise (S/N) ratio of 3 were 10 ng/mL (E3-3G) and 5 ng/mL (E3-16G). The analytical recovery was over 85% and, in general, inter-day and intra-day variability for precision and accuracy were less than 10%. When applied to a pregnancy urine sample to biomedical monitoring of the function of the maternal/fetal unit, the proposed method allowed rapid and sensitive screening for the detection of E3-3G and E3-16G.     

Styrene oxide DNA adducts: quantitative determination using <Superscript>31</Superscript>P monitoring

The reaction of styrene oxide, a potential carcinogen in humans, with DNA constituents has been used to develop an improved method for quantification of DNA adducts. To enable monitoring of DNA adducts caused by xenobiotics at physiological relevant levels, a robust, reliable and powerful method based on monitoring of phosphorus in nucleotides is described. An efficient enzymatic digestion step and a sample-preconcentration procedure are essential, and enable separation of alkylated nucleotides from the large excess of native nucleotides. The adducts are detected by means of the phosphorus signal measured at mass m/z=31 with an inductively-coupled-plasma mass spectrometer. Bis(4-nitrophenyl)phosphate (BNPP) serves as internal standard for quantification of the adducts. The absolute limit of detection, 45 fmol, corresponds to detection of three modified nucleotides among 10⁷ native nucleotides (the calculation is based on use of 50 g calf thymus DNA). An adduct formation ratio at the DNA of 3.6 adducts per 1000 nucleotides was measured, which is 75% lower than for reaction with monomeric 2-deoxy-nucleotides. In addition, a substantial amount of phosphate adducts were detected, but in DNA the rate of phosphate formation was lower than with monomeric nucleotides. Most probably these adducts escaped unnoticed when ³¹P-post-labelling was employed.     

Estimation of a quantile in some nonstandard cases

A necessary condition for the asymptotic normality of the sample quantile estimator isf(Q(p))=F(Q(p))>0, whereQ(p) is thep-th quantile of the distribution functionF(x). In this paper, we estimate a quantile by a kernel quantile estimator when this condition is violated. We have shown that the kernel quantile estimator is asymptotically normal in some nonstandard cases. The optimal convergence rate of the mean squared error for the kernel estimator is obtained with respect to the asymptotically optimal bandwidth. A law of the iterated logarithm is also established.This research was partially supported by the new faculty award from the University of Oregon.     

一种基于电荷泵锁相环的快速啁啾发生器

调频连续波(FMCW)雷达常用于测量多个目标的距离和速度,被广泛用于自动驾驶场景中。FMCW雷达产生的线性调频波称为啁啾(Chirp),通常由锁相环(PLL)电路产生。由于带宽有限,传统锯齿啁啾下降时间过长,降低了雷达性能。文章提出了一种基于分段电流电荷泵的快速啁啾发生器设计方案。调频阶段采用最佳电荷泵电流,即最优环路带宽,可保证啁啾的线性度。啁啾下降阶段使用更大的电流,可缩短下降时间。仿真结果表明,啁啾发生器频率输出范围为19.25～20.25 GHz, 1.2 V电压下整体功耗为31.8 mW。PLL带宽为1.5 MHz时,锯齿形啁啾下降的最大调制速率为454 MHz/μs。与恒定电荷泵电流方式相比,下降时间缩短了80%。     

一种43 GHz超高带宽线性驱动电路设计

基于0.13μm SiGe BiCMOS工艺,设计了一种线性驱动电路。该电路具有高速和大摆幅的优势,能线性驱动行波马赫-曾德尔调制器(TW-MZM),可满足光通信系统100 Gbit/s单通道的应用需求。驱动电路包括连续时间线性均衡(CTLE)电路、可变增益放大(VGA)电路和基于Cascode结构改进优化的输出级电路,实现了增益可调,且避免发生由较大输出摆幅导致的晶体管击穿。仿真结果表明,电路的-3 dB带宽为43 GHz,其增益在15～25 dB内可调。在56 Gbaud NRZ/PAM4的输入信号下,测得的眼图形状良好,差分输出摆幅峰-峰值达4 V,电路整体功耗为1.02 W,面积为0.33 mm²。