Modified Arrhenius Equation in Materials Science,Chemistry and Biology

The Arrhenius plot (logarithmic plot vs. inverse temperature) is represented by a straight line if the Arrhenius equation holds. A curved Arrhenius plot (mostly concave) is usually described phenomenologically, often using polynomials of T or 1/T. Many modifications of the Arrhenius equation based on different models have also been published, which fit the experimental data better or worse. This paper proposes two solutions for the concave-curved Arrhenius plot. The first is based on consecutive A→B→C reaction with rate constants k₁ ≪ k₂ at higher temperatures and k₁ ≫ k₂ (or at least k₁ > k₂) at lower temperatures. The second is based on the substitution of the temperature T the by temperature difference T − T₀ in the Arrhenius equation, where T₀ is the maximum temperature at which the Arrheniusprocess under study does not yet occur.     

The mechanics of tack: Viscoelastic contact on a rough surface

This work considers the mechanics of tack in viscoelastic materials. We study a particular tack test in which a flat, rigid probe is brought into contact with the rough surface of a viscoelastic material. The rough surface is modeled as consisting of many spherical asperities of varying heights but all having the same radius. Because of the asperities, the apparent contact area can be much greater than the actual contact area, which is regarded as the key parameter that controls tack. We show how this actual contact area evolves with time under different loading conditions. Our formulation is different from previous theories in that it explicitly accounts for the fact that asperities of different heights are subjected to different loading histories. Explicit solutions are given for the cases of a constant load test, a load relaxation test, and a constant displacement rate test. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1485–1495, 2000     

Investigation of the Protection of the C4 Hydroxyl Group in Macrobicyclic Kdo Donors

Chemical synthesis of 3-deoxy-d-manno-2-octulosonic acid (Kdo)-containing glycans, such as bacterial lipopolysaccharides (LPSs) and capsular polysaccharides (CPSs), is in high demand for the development of vaccines against pathogenic bacteria. We have recently achieved the complete α-stereoselective glycosidation of Kdo using a macrobicyclic donor tethered at the C1 and C5 positions. In this study, to expand the scope of Kdo glycosidation, we sought to protect the 4-OH group, thereby shortening the reaction time and ensuring the conversion of the glycosyl acceptor via its selective removal. The protection of the 4-OH group influenced the reactivity of the Kdo donor, and the triisopropylsilyl (TIPS) group acted as a selectively removable booster. The 4-O-TIPS donor allowed the synthesis of the α(2,4)-linked dimeric Kdo sequence, which is widely found in bacterial LPSs.     

Snap transitions in adhesion

Equilibrium adhesion states are analyzed for nonlinear spherical caps adhered to a rigid substrate under the influence of adhesive tractions that depend on the local separation between the shell and substrate. Transitions between bistable snapped-in and snapped-out configurations are predicted as a function of four nondimensional parameters representing the adhesive energy, the undeformed shell curvature, the range of the adhesive interactions, and the magnitude of an externally applied load. Nonuniform energy and traction fields associated with free-edge boundary conditions are calculated to better understand localized phenomena such as the diffusion of impurities into a bonded interface and the diffusion of receptors in the cell membrane. The linear Griffith approximations commonly used in the literature are shown to be limited to shells with a small height to thickness ratio and short-range adhesive interactions. External loading is found to alter the adhered configurations and the spatial distributions of both adhesive and elastic energies. An important implication of the latter analysis is the theoretical prediction of the pull-off force, which is shown to depend not only on the interface properties, but also on the geometric and material parameters of the shell and on both the magnitude and type of external loading.     

Plasma Surface Modification of Glass Fibre-Reinforced Nylon-6,6 Thermoplastic Composites for Improved Adhesive Bonding

The surface modification and adhesive bonding of a unidirectional GFRP Nylon-6,6 thermoplastic composite has been investigated. Wettability studies of plasma-treated specimens showed a significant reduction in the advancing and receding contact angles in water, relative to untreated material. The most effective treatment used oxygen plasma. The increases in wettability observed were determined to be the result of (a) an increase in the concentration of oxygen- and nitrogen-containing functional groups on the surface of the polymer and, (b) removal of fluoropolymer contamination, the source of which was identified as the PTFE mould release agent. This was established by SSIMS analysis. The surface modification resulted in significantly improved adhesion between the composite and an applied toughened epoxy adhesive; a considerable increase in the Mode II critical strain energy release rate, G _IIc, was observed following plasma treatment. Specimens treated in an oxygen plasma showed the greatest improvement in G _IIc, failing cohesively at a value of 1.6 kJ·m^–2 after only 15 seconds exposure. Without plasma treatment the specimens failed in an adhesive mode at very low values of G _IIc. Adhesion was further optimised by moulding the GFRP Nylon-6,6 against steel plates instead of PTFE.     

Hydrophobic Chitosan Nanoparticles Loaded with Carvacrol against Pseudomonas aeruginosa Biofilms

Pseudomonas aeruginosa infections have become more challenging to treat and eradicate due to their ability to form biofilms. This study aimed to produce hydrophobic nanoparticles by grafting 11-carbon and three-carbon alkyl chains to a chitosan polymer as a platform to carry and deliver carvacrol for improving its antibacterial and antibiofilm properties. Carvacrol–chitosan nanoparticles showed ζ potential values of 10.5–14.4 mV, a size of 140.3–166.6 nm, and an encapsulation efficiency of 25.1–68.8%. Hydrophobic nanoparticles reduced 46–53% of the biomass and viable cells (7–25%) within P. aeruginosa biofilms. Diffusion of nanoparticles through the bacterial biofilm showed a higher penetration of nanoparticles created with 11-carbon chain chitosan than those formulated with unmodified chitosan. The interaction of nanoparticles with a 50:50 w/w phospholipid mixture at the air–water interface was studied, and values suggested that viscoelasticity and fluidity properties were modified. The modified nanoparticles significantly reduced viable P. aeruginosa in biofilms (0.078–2.0 log CFU·cm⁻²) and swarming motility (40–60%). Furthermore, the formulated nanoparticles reduced the quorum sensing in Chromobacterium violaceum. This study revealed that modifying the chitosan polarity to synthesize more hydrophobic nanoparticles could be an effective treatment against P. aeruginosa biofilms to decrease its virulence and pathogenicity, mainly by increasing their ability to interact with the membrane phospholipids and penetrate preformed biofilms.     

A “self‐pinning” adhesive based on responsive surface wrinkles

Surface wrinkles are interesting since they form spontaneously into well‐defined patterns. The mechanism of formation is well‐studied and is associated with the development of a critical compressive stress that induces the elastic instability. In this work, we demonstrate surface wrinkles that dynamically change in response to a stimulus can improve interfacial adhesion with a hydrogel surface through the dynamic evolution of the wrinkle morphology. We observe that this control is related to the local pinning of the crack separation pathway facilitated by the surface wrinkles during debonding, which is dependent on the contact time with the hydrogel. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

阻抗谱定量分析金属/有机涂层界面粘接力

采用传输线类型的CR电路解析阻抗谱得到离散的电容参数,它们随离散特征频率变化的线性区间斜率与有机涂层/金属界面的瞬时脱层速率有关,不受缺陷位置腐蚀产物的影响,重现性好.建立了阻抗谱与粘结力的定量关系和数据处理方法,并进行了验证,说明了精度较高的原因.用硅烷直接预处理,或者磷化、热浸锌后再处理,会明显影响A3钢与环氧粉末涂层之间的粘结力.     

Determination de l'Acide l-Ascorbique a l'Aide d'Electrodes Bacteriennes,Tissulaires et Enzymatiques

Abstract

L-ascorbic acid membrane electrodes based upon the use of four classes of biocatalysts immobilized at an oxygen electrode are evaluated and compared in terms of electrode properties and operating requirements. Isolated ascorbate oxydase enzyme in soluble form and in covalent binding matrices, peel of cucumber and living bacterial cells of Enterobacter agglomerans strain, respectively, are employed as biocatalytic layers. The physico-chemical factors, life times and interferences are discussed in details. The low stability of the soluble enzyme sensor does not allow its analytical utilization, but the immobilized enzyme, bacterial and tissue electrodes can be used, even in multivitamin pharmaceutical formulations. The common linear range of those three biosensors are of 4.10^?6 M to 7.10^?4 M with a precision and a reproducibility of ± 3%.     

Surface Modification of Poly(tetrafluoroethylene) Films by Plasma Pre-Activation and Plasma Polymerization of Glycidyl Methacrylate

Surface modification of poly(tetrafuoroethylene) (PTFE) film by plasma polymerzation and deposition of glycidyl methacrylate (GMA), in the presence and absence of Ar or O₂ plasma pre-activation, was carried out to enhance the adhesion with polyimides (PI) film in the presence of an epoxy adhesive. For deposition carried out at low RF power, a high epoxide concentration was preserved in the plasma-polymerized GMA (pp-GMA) layer on PTFE (pp-GMA-PTFE). However, high adhesion strength of the PI/pp-GMA-PTFE laminate was obtained only in the presence of O₂ plasma pre-activation of the PTFE substrates prior to plasma polymerization and deposition of GMA. In the absence of any plasma pre-activation or in the presence of Ar plasma pre-activation, the deposited pp-GMA layer on the PTFE surface could be readily removed by solvent extraction. The adhesion enhancement of the PI/pp-GMA-PTFE laminates in the presence of O₂ plasma pre-activation was attributed to the preservation of the epoxide functional groups in the pp-GMA layer, the curing of the GMA chains into the matrix of the epoxy adhesive, and the covalent bonding of the pp-GMA layer on the PTFE surface.