4 ,4′-二巯基二苯醚分子的电子输运性质研究

利用从头算方法和弹性散射格林函数理论,研究了4 ,4′-二巯基二苯醚分子的电输运性质.计算表明,当外加偏压少于0 .9 V时,该分子器件不导电.当外加偏压进一步增加时,该分子器件的电导呈现出平台特征.由于中间氧原子的存在,相对于4 ,4′-二巯基联苯分子来说,该分子的导电特性较差.     

A DCM‐Type Red‐Fluorescent Dopant for High‐Performance Organic Electroluminescent Devices

2‐(2‐tert‐Butyl‐6‐((E)‐2‐(2,6,6‐trimethyl‐2,4,5,6‐tetrahydro‐1H‐pyrrolo[3,2,1‐ij]quinolin‐8‐yl)vinyl)‐4H‐pyran‐4‐ylidene)malononitrile (DCQTB) is designed and synthesized in high yield for application as the red‐light‐emitting dopant in organic light‐emitting diodes (OLEDs). Compared with 4‐(dicyanomethylene)‐2‐tert‐butyl‐6‐(1,1,7,7,‐tetramethyljulolidyl‐9‐enyl)‐4H‐pyran (DCJTB), one of the most efficient red‐emitting dopants, DCQTB exhibits red‐shifted fluorescence but blue‐shifted absorption. The unique characteristics of DCQTB with respect to DCJTB are utilized to achieve a red OLED with improved color purity and luminous efficiency. As a result, the device that uses DCQTB as dopant, with the configuration: indium tin oxide (ITO)/N,N′‐bis(1‐naphthyl)‐N,N′‐diphenyl‐1,1′‐biphenyl‐4,4′‐diamine (NPB; 60 nm)/tris(8‐quinolinolato) aluminum (Alq₃):dopant (2.3 wt %) (7 nm)/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline (BCP; 12 nm)/Alq₃(45 nm)/LiF(0.3 nm):Al (300 nm), shows a larger maximum luminance (L_max = 6021 cd m^–2 at 17 V), higher maximum efficiency (η_max = 4.41 cd A^–1 at 11.5 V (235.5 cd m^–2)), and better chromaticity coordinates (Commission Internationale de l'Eclairage, CIE, (x,y) = (0.65,0.35)) than a DCJTB‐based device with the same structure (L_max = 3453 cd m^–2 at 15.5 V, η_max = 3.01 cd A^–1 at 10 V (17.69 cd m^–2), and CIE (x,y) = (0.62,0.38)). The possible reasons for the red‐shifted emission but blue‐shifted absorption of DCQTB relative to DCJTB are also discussed.     

On the Origin of Green Emission Bands in Fluorene‐Based Conjugated Polymers

Blue‐light‐emitting diodes made of polyfluorenes have low stability and, under operation, rapidly degrade and produce undesirable low‐energy emission bands (green or g‐bands). A spectroelectrochemical study of the degradation process suffered by polyfluorenes is reported here. These polymers lose their electronic properties by electrochemical oxidation and reduction through σ‐bond breaking. In addition, upon electrochemical reduction, the development of a structured green emission band at 485 nm is observed. The position and shape of this band is different from the usual featureless band at 535 nm assigned to fluorenone defects. The green‐light‐emitting product is isolated and analyzed by Fourier‐transform IR spectroscopy; fluorenone formation is excluded. The isolated product is crosslinked; its green emission is probably related to the formation of an intramolecular excimer.     

Low‐Operating‐Voltage Organic Transistors Made of Bifunctional Self‐Assembled Monolayers

Self‐assembled monolayers (SAMs) are molecular assemblies that spontaneously form on an appropriate substrate dipped into a solution of an active surfactant in an organic solvent. Organic field‐effect transistors are described, built on an SAM made of bifunctional molecules comprising a short alkyl chain linked to an oligothiophene moiety that acts as the active semiconductor. The SAM is deposited on a thin oxide layer (alumina or silica) that serves as a gate insulator. Platinum–titanium source and drain electrodes (either top‐ or bottom‐contact configuration) are patterned by using electron‐beam (e‐beam) lithography, with a channel length ranging between 20 and 1000 nm. In most cases, ill‐defined current–voltage (I–V) curves are recorded, attributed to a poor electrical contact between platinum and the oligothiophene moiety. However, a few devices offer well‐defined curves with a clear saturation, thus allowing an estimation of the mobility: 0.0035 cm² V^–1 s^–1 for quaterthiophene and 8 × 10^–4 cm² V^–1 s^–1 for terthiophene. In the first case, the on–off ratio reaches 1800 at a gate voltage of –2 V. Interestingly, the device operates at room temperature and very low bias, which may open the way to applications where low consumption is required.     

A Versatile Universal Capacitor‐Grounded Voltage‐Mode Filter Using DVCCs

In this paper, a versatile three‐input five‐output universal capacitor‐grounded voltage‐mode filter is proposed. The circuit employs two differential voltage current conveyors as active elements together with two grounded capacitors and four resistors as passive elements. The proposed configuration can be used as either a single‐input five‐output or three‐input two‐output. Unlike the previously reported works, it can simultaneously realize five different generic filtering signals: lowpass, bandpass, highpass, bandreject, and allpass. It still maintains the following advantages: (i) the employment of all grounded capacitors, (ii) no need to employ inverting‐type input signals, (iii) no need to impose component choice, (iv) orthogonal control of the resonance angular frequency ω_o and the quality factor Q, and (v) low active and passive sensitivity performances.     

高压变频调速在火电厂锅炉引风系统中的应用

本文介绍了利用TMEIC的MV系列变频器对火电厂锅炉引风系统进行改造，对电力电子技术、异步电机变频的控制方式和MV系列变频器的工作原理及特点等进行了介绍，对改造后的系统特点、经济效益进行了分析，指出改造后降低了煤耗、节省了电能，并可在火电厂其它平方转矩负载上的推广应用。     

Synthesis of two dihydropyrroloindoledione‐based copolymers for organic electronics

Two novel dihydropyrroloindoledione (DPID)‐based copolymers have been synthesized in a two directional approach and characterized (gel permeation chromatography (GPC), ultraviolet‐visible (UV–vis), cyclic voltammetry, and computational models). These planar, broad absorption copolymers show promise for use in organic electronics, with deep energy levels and low bandgaps. The two‐directional Knoevenagel condensation used demonstrates the versatility of DPID as a useful yet underexploited conjugated unit. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Solution processable high band gap hosts based on carbazole functionalized cyclic phosphazene cores for application in organic light‐emitting diodes

A new class of solution processable dendrimers based on cyclic phosphazene (CP) cores have been prepared and used as host materials for blue and green organic light emitting diodes (OLEDs). The dendrimers are prepared in high yield from minimal step reactions, are soluble in common solvents for solution processing, are amorphous, and have excellent thermal properties necessary for application in OLEDs. OLED efficiencies of 10.3 cd/A (4.2 lm/W) and 35.3 cd/A (33.5 lm/W) were achieved using commercially available FIrpic and Ir(mppy)₃ as blue and green phosphorescent emitters, respectively. These efficiencies were 2× higher than control devices prepared using poly(N‐vinylcarbazole), the most commonly used host material in solution processed phosphorescent OLEDs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

High speeds complementary integrated circuits fabricated with all‐printed polymeric semiconductors

Inkjet‐printed high speed polymeric complementary circuits are fabricated using an n‐type ([poly{[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐dithiophene)} [P(NDI2OD‐T2), Polyera ActivInk N2200] and two p‐type polymers [poly(3‐hexylthiophene) (P3HT) and a dithiophene‐based polymer (Polyera ActivInk P2100)]. The top‐gate/bottom‐contact (TG/BC) organic field‐effect transistors (OFETs) exhibit well‐balanced and very‐high hole and electron mobilities (μ_FET) of 0.2–0.5 cm²/Vs, which were enabled by optimization of the inkjet‐printed active features, small contact resistance both of electron and hole injections, and effective control over gate dielectrics and its orthogonal solvent effect (selection of poly(methyl methacrylate) and 2‐ethoxyethanol). Our first demonstrated inkjet‐printed polymeric complementary devices have been integrated to high‐performance complementary inverters (gain >30) and ring oscillators (oscillation frequency ～50 kHz). We believe that the operating frequency of printable organic circuits can be further improved more than 10 MHz by fine‐tuning of the device architecture and optimization of the p‐ and n‐channel semiconductor processing. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

The Chemistry of Cyborgs—Interfacing Technical Devices with Organisms

The term “cyborg” refers to a cybernetic organism, which characterizes the chimera of a living organism and a machine. Owing to the widespread application of intracorporeal medical devices, cyborgs are no longer exclusively a subject of science fiction novels, but technically they already exist in our society. In this review, we briefly summarize the development of modern prosthetics and the evolution of brain–machine interfaces, and discuss the latest technical developments of implantable devices, in particular, biocompatible integrated electronics and microfluidics used for communication and control of living organisms. Recent examples of animal cyborgs and their relevance to fundamental and applied biomedical research and bioethics in this novel and exciting field at the crossroads of chemistry, biomedicine, and the engineering sciences are presented.