管肋式辐射器排热特性的数值分析与优化设计

为得到按单面辐射方式布置的管肋式空间辐射器的排热特性，建立了相应的数学模型．采用数值模拟方法分析了管内流体温度、肋片几何尺寸和等效热沉温度对辐射器排热特性的影响，得到了不同参数值下辐射器单位面积排热量以及特定参数范围内的辐射器肋片最佳宽度和肋片效率．数值模拟结果对辐射器的工程结构设计以及空间站热管理方案的优化分析具有一定的参考价值．     

Synthesis, characterization and thermal studies on cellulose acetate membranes with additive

Cellulose acetate (CA) membranes are used in ultrafiltration applications, although they show low chemical, mechanical and thermal resistance. In order to prepare membranes with improved properties, modification of cellulose acetate with polyethelene glycol (PEG 600) has been attempted. In this study, CA has been mixed with PEG 600 as an additive in a polar solvent. The effects of CA composition and additive concentration given by a mixture design of experiments on membrane compaction, pure water flux, water content and membrane hydraulic resistance have been studied and discussed. The efficiency of protein separation by the developed CA membranes have been quantified using model proteins such as pepsin, egg albumin (EA) and bovine serum albumin (BSA). The thermal stability of the developed membranes prepared with PEG 600 additive has also been investigated using thermogravimetric analysis and differential scanning calorimetry.     

SIAmate-a compact and modular sequential injection analysis controller

A number of sequential injection analysis (SIA) measurement methods have been developed during the last years. Almost all have been used in laboratory conditions with good results, but very few have been implemented as on-line methods, applied to non-stop measurements, producing immediate results for process control. The transfer of an SIA system from laboratory to an industrial facility [J. Ruzicka, Anal. Chim. Acta 261 (1992) 3] requires a whole new range of details to be taken into account. Some SIA platform related topics will be discussed. There are numerous ways of building an SIA system that meets the needs of the industry. One alternative, SIAmate, is presented.     

Parameter identification and position control for helical hydraulic rotary actuators based on particle swarm optimization

It is difficult to obtain an accurate mathematical model in electro-hydraulic servo control system, due to the nonlinear factors such as dead zone, saturation, flow coefficient, and friction. Hence, a parameter identification algorithm, combining recursive least squares (RLS) with modified nonlinear particle swarm optimization (NPSO) algorithm, is proposed. On this basis, another improved NPSO algorithm is also put forward, aiming at searching for the optimal proportional–integral (PI) controller gain of the nonlinear hydraulic system while giving comprehensive consideration to the system performance indexes. The system identification experiments and position tracking control are conducted, respectively. As indicated by the comparison with the least squares (LS), RLS, PSO, and RLS–LPSO results, the proposed method shows higher identification and control accuracy.     

Hierarchical and Hybrid Cell Load Balancing in 5G Heterogeneous Mobile Networks

In Fifth Generation (5G) Heterogeneous Mobile Networks (HetNets), deploying dense small cell networks makes user association more challenging. The process of collecting cell load information from the User Equipments (UEs) and broadcasting the feedback message involves significant overhead and time complexity. Moreover, the UEs may not know the optimum cell to reselect, satisfying its data rate requirements. In order to overcome these drawbacks, in this paper, we propose to design an Hierarchical and Hybrid Cell Load Balancing (HHCLB) technique using Selective Handoff. In this technique, the UEs of each cell are grouped into clusters depending on their proximity distance. Each cluster contains a cluster controller (CC) which is in charge of determining the intra-cell load and redirecting the cell-reselection request of a UE. If the data rate of any UE in a cluster becomes less than its required rate, then the cell reselection process is performed. By simulation results, it is shown that load balancing can be done proactively (implicitly) by the CCs when the load is unbalanced or can be done on demand (explicitly) when a UE send a request for cell reselection. In the case of Macro cells, HHCLB attains 71% higher throughput for low load scenario and 59% higher throughput for high load scenario. Similarly, in the case of Femto cells, HHCLB attains 19% higher throughput for low load scenario and 27% higher throughput for high load scenario.     

Preparation, characterization and effect of annealing on performance of cellulose acetate/sulfonated polysulfone and cellulose acetate/epoxy resin blend ultrafiltration membranes

Polymeric membranes based on cellulose acetate (CA)--sulfonated polysulfone blends at three different polymer compositions were prepared by solution blending and phase inversion technique, characterized and subjected to annealing at 70, 80 and 90 °C. The permeate water flux, separation of bovine serum albumin and its flux by the blend membranes before and after thermal treatment, have been compared and discussed. Similarly, CA and epoxy resin (diglycidyl ether of bisphenol-A) were blended in various compositions, in the presence and in the absence of polyethyleneglycol 600 as non-solvent additive, using N,N^′-dimethylformamide as solvent, and used for preparing ultraflltration membranes by phase inversion technique. The polymer blend composition, additive concentration, casting and gelation conditions were optimized. Blend membranes were characterized in terms of compaction, pure water flux, water content and membrane resistance. The effects of polymer blend composition and additive concentration on the above parameters were determined and the results are discussed.     

基于GAP技术的网络隔离设备的设计

简要介绍GAP技术的原理,提出一种基于现场可编程门阵列(FPGA)的实现方案.通过详细分析SCSI协议控制器的设计和SDRAM IP核的应用,将SCSI协议控制器、SDRAM控制器和核心控制器集成在一个FPGA中实现.经测试,这种方案比MCU SCSI协议控制器的方案具有更高的可靠性和兼容性.     

基于FPGA的控制器局部网(CAN)总线控制器设计

提出一种基于FPGA的CAN总线控制器的实现方案,给出其结构框图,并对内部各模块进行较为详细的介绍.最后给出控制器在Altera公司的系列FPGA上实现时的资源利用情况及其性能,并参照CAN协议规范对其进行仿真验证.     

基于DSP56F805的直流无刷电机控制系统设计

介绍了基于Freescale公司DSP56F805的直流无刷电机控制系统的设计.DSP56F805数据处理能力强且具有丰富的专用电机控制模块,设计的控制器硬件电路简洁,控制可靠,已应用于机器人机械手控制中.对系统硬件实现和控制原理进行了详细论述.